BMW 1 Series E82 (2008-2013)

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

• 5 layers of wire reinforced silicone
• Perfect fitment with factory airbox
• Compatible with single stage or three stage manifold
• Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Knock down the roadblocks preventing you from performing regular maintenance on your BMW. On the E9x and E8x chassis you run into issues with changing the rear spark plugs and coil packs. A job that should take approximately an hour or so ends up taking significantly longer because you have to remove the cowl and all associated screws. Most of the time the screws end up missing or dropped into your engine bay which can be a headache and you have to order new hardware or deal with the cowl being incorrectly fastened.

Cowl delete filters are a great addition to your E9x or E8x chassis; these filters allow you to get rid of clutter in the engine bay which adds benefits like weight reduction, improved air flow in the engine bay, more room for working on the engine and an overall cleaner engine bay appearance. We all know it is important to keep up on engine maintenance to keep your BMW running at peak performance and prevent larger future issues. When we can eliminate any roadblocks or additional work preventing us for performing engine maintenance this could make it less daunting to go change spark plugs, coil packs or simple filters.

Benefits:

Weight Reduction
Cleaner engine bay appearance
Added room for maintenance
Improved engine bay air flow

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

High Performance air filter, replacement filter for Turner Motorsport intakes, or great for your custom intake project. 

Filter Dimension 

• 152MM length 
• 114MM base
• 60MM inlet 

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.

For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.

WHY UPGRADE?

Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.

Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.

FEATURES & BENEFITS

Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN

6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:

Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or main bearing service!