BMW Maintenance & Tune-Up Parts for BMW 1 Series E82 (2008-2013)

Bosch ZR5TPP33S spark plug for  engines. Listed as BMW part #'s 12120037582 and 12120037575. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter for your BMW

Upgrade your BMW with Turner Motorsport's Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter. This top-class fully synthetic, low-SAPS motor oil features the latest additive technology, ensuring superior performance and efficiency in modern gasoline and diesel vehicles, whether equipped with or without particulate filters (GPF / DPF). It guarantees the lowest friction and outstanding protection even under tough operating conditions in high-performance engines.

Key Benefits:

• Outstanding lubrication reliability
• Rapid oil penetration
• Excellent high-pressure and wear protection properties
• Prevents the build-up of deposits
• Outstanding engine cleanliness
• Optimum stability to aging
• Reduces fuel consumption
• Compatible for use with turbochargers and catalytic converters

Specifications and Approvals:

• ACEA C3, API SN
• BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01)
• MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
• Porsche C40
• VW 511 00

Recommended for Specifications:

• GM dexos2
• MB 226.5
• Renault RN 0700, Renault RN 0710

Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved.

Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only

All sets of 12 now 10% off regular price!

Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.

Conforms to BMW LL-01 standards.

All sets of 12 now 10% off regular price!

Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Features:

• Provides G-4 level gear protection (suitable for transmissions and transaxles, like the Corvette T-56).
• Provides smooth and consistent shifts.
• More stable than petroleum fluids; suitable for extended drain intervals.
• Does not varnish at high temperatures.
• Improved cold weather characteristics.

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluids were previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Suitable replacement for the following BMW part numbers: BMW ATF 3 BMW ATF 3+ 83220142516 (M-1375.4) 83222152426 (M-L12108) 83220432807 83220397114 MTF-LT-3 83222289720 83222305397 ZF Lifeguard 6/6 PLUS 8 ZF6/8

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.�

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve�compatibility, and long service life.

Properties:

• Smooth engine running characteristics
• Long engine service life due to exceptional protection against wear
• Rapid oil delivery at low temperatures
• Optimum oil pressure at all engine speeds
• Premium lubrication reliability at high and low temperatures
• High shear and ageing stability
• Reduces fuel consumption and pollutant emissions
• Outstanding engine cleanliness
• Tested with catalytic converters and performance proven with turbochargers
• Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

• ACEA�C3
• API SN / CF
• BMW�Longlife-04
• MB-Approval 229.51
• VAG 502.00 / 505.00

Recommended�for the following specifications:

• ACEA A3 /�B4
• MB 229.31
• VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

All sets of 12 now 10% off regular price

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluidswere previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.