BMW Tools & Specialty Equipment for BMW E9 3.0CS M30 3.0L

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

The Schwaben Adjustable Wheel Dolly Jack is a top-tier solution for automotive enthusiasts and professionals seeking a dependable, heavy-duty tool to effortlessly lift and move vehicles. This versatile dolly features an adjustable base that fits tires up to 34 inches in diameter and 11 inches wide, making it compatible with a wide range of vehicles. Constructed from robust steel, it can support up to 1300 lbs per unit, ensuring it handles even the heaviest vehicles with ease. A tough, powder-coated finish adds an extra layer of protection against rust and wear, increasing the tool’s lifespan in tough environments.

The innovative design of the open-arm base allows users to slide the dolly under a vehicle's tire without the need to raise the car first, saving both time and energy. Equipped with 360-degree heavy-duty casters, this dolly offers superior maneuverability, letting you easily move your car around the shop, garage, or driveway. The ratcheting foot pedal lift system enables hands-free operation, and the rubberized pad ensures a secure grip while lifting. When used as a complete set of four, Schwaben Wheel Dolly Jacks can lift and move up to 5200 lbs in total, ideal for handling large, heavy vehicles.

Whether you're working in a professional garage or tackling a DIY project, the Schwaben Adjustable Wheel Dolly Jack delivers exceptional performance, durability, and ease of use.

Key Features:

Adjustable Base: Fits tires up to 34 inches in diameter and 11 inches wide. Heavy-Duty Construction: Supports up to 1300 lbs per jack, made from durable steel. Long-Lasting Durability: Powder-coated finish resists wear and corrosion, ensuring extended use. User-Friendly Design: Open-arm base makes it easy to position the dolly under a tire without lifting the vehicle. Enhanced Maneuverability: 360° heavy-duty casters for effortless movement across various surfaces. Hands-Free Operation: Ratcheting foot pedal lift with a rubber pad provides a secure grip for easy lifting. High Capacity: A full set of four jacks can support up to 5200 lbs of vehicle weight. Lifetime Replacement: Backed by Schwaben's lifetime replacement program for peace of mind. Specifications:

Max Tire Diameter: 34" (863 mm) Max Tire Width: 11" (280 mm) Max Weight Capacity: 1300 lbs (590 kg) per Dolly Jack Safety Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit www.p65warnings.ca.gov for details on Proposition 65 warnings.

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

• Reversible ½-inch drive click-to-stop
• Torque range of 10 to 150 ft-lb
• Accurate to within +/-4%
• 18 inches in length with a convenient carry case

These weld protectors allow you to safely jack up your vehicle without crushing or bending any pinch welds. These will fit any jack and will work with many jack stands such as the Schwaben Aluminum Jack Stands.

Specifications:

• 3" wide
• 1" tall
• Single groove top
• Double grooved bottom

Our aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

Better still, order two: one for your garage and another for the emergency tool kit in you trunk.

The 20" Portable 3 Drawer Tool Box offers the perfect blend of portability, durability, and secure storage for your tools. With a compact yet spacious 20.5" x 9" x 13" design, this tool box is built to keep your tools organized and easily accessible whether you're on the go or working in your garage.

Key Features:

• 3-Drawer Design: Organize your tools with three full-extension drawers that glide smoothly on ball bearing slides, each measuring 17.5" x 7.5" x 2".
• Portability & Convenience: Lightweight construction and a sturdy carrying handle make this tool box easy to transport wherever you need it.
• Durable Finish: The black powder coat finish, combined with rust-resistant latches, ensures long-lasting good looks and protection.
• Secure Storage: Keep your tools safe with the included lock and keys, providing peace of mind whether at home or on the job site.
• Additional Storage: Extra space under the lid is perfect for storing larger hand tools, maximizing your storage capacity.
• Heavy-Duty Construction: Built to last with 16-gauge heavy-duty steel, this tool box is designed to withstand the rigors of daily use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The perfect kit containing most of your needed European essentials. 

Features:

• 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
• 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
• 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
• 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
• 1PC- 1/4" DR.UNIVERSAL JOINT
• 1PC- 1/4" DR.SLIDING T-BAR
• 1PC- 1/4" DR.6" SPINNER HANDLE
• 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
• 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
• 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
• 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
• 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
• 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
• 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 in
• Wide and robust frame made of high-strength steel
• Fitted with quick-lift pedal for easy reach of lifting point
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation

Specifications:

• Capacity:  2900 lb 
• Min. height:  3.15 in 
• Max. height:  28.94 in 
• Frame length:  37.01 in 
• Handle length:  37.40 in 
• Frame height:  6.30 in 
• Width:  18.90 in 
• Weight:  86 lb

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
• Deluxe transverse support for even more stability
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly.