Packaged by Turner for BMW E92 M3 S65 4.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Wheel Bearing Kit - rear
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710801
Part#: 33416762321-KT
In Stock
$ 78.99

This product was last offered at the strikethrough price on
04-20-2026

$ 73.99 USD
Free Shipping on orders $49 and up
$ 73.99 USD
Free Shipping on orders $49 and up
Wheel bearings on modern vehicles usually need pressed in. If that is the case with your vehicle, specialized tools such as a shop press may be needed to install this bearing. Check what is required to do your wheel bearing prior to ordering. Wheel bearings can need replaced for a number of different reasons. On some vehicles, when removing the front axles, it is required that you also replace the wheel bearings before reinstallation. If the wheel turns with a gritty feel or there is a loud metal to metal noise when on the road, your bearings have failed.
Show More Show Less
Rear Guide Rod Upgrade - Right - E82, E9x
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338096
Part#: 33322283548
In Stock
Starting at $ 149.99 USD
Free Shipping
Starting at $ 149.99 USD
Free Shipping
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Front Lower Control Arm - Left - E82 1M, E9X M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338351
Part#: 31102283577X
In Stock
Starting at $ 99.99 USD
Free Shipping
Starting at $ 99.99 USD
Free Shipping
This left/driver's front lower control arm # 31102283577 - also know as a wishbone. This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi) (also requires headlight rod, 37142283867). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible
Show More Show Less

Turner BMW 20mm Wheel Spacers (Pair) - Normal Pad
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:6181670
Part#: TWH9905020T
In Stock
Sale - Save 18% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.99 USD
Free Shipping
Sale - Save 18%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.99 USD
Free Shipping
20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Hood And Trunk Strut Kit - E92
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56507791
Part#: 51237900795KT2
In Stock
New Item
$ 89.99 USD
Free Shipping on orders $49 and up
The Turner Motorsport Hood & Trunk Strut Service Kit brings your E92 coupe’s closure panels back to original factory specs. Utilizing original equipment Stabilus gas pressurized struts, this kit provides precise pressure dampening to handle the weight of your front bonnet and rear decklid effortlessly
Show More Show Less
Turner BMW 5mm Wheel Spacers (Pair) - Normal Pad
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:6181662
Part#: TWH9905005T
Ships on Nov 2, 2026
Sale - Save 25% $ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
Sale - Save 25%
$ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Rear Upper Shock Mount Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710806
Part#: 33506771738-KT
In Stock
Sale - Save 1% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.68 USD
Free Shipping
Sale - Save 1%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.68 USD
Free Shipping
Includes all the necessary mounts to install new shocks on the rear of your E9X BMW. The following parts are included. Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2)
Show More Show Less
Genuine BMW Rear Guide Rod Upgrade - Left - E82, E9x
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338095
Part#: 33322283547
Ships in 2 Business Days
$ 175.99

This product was last offered at the strikethrough price on
03-17-2026

Starting at $ 152.99 USD
Free Shipping
Starting at $ 152.99 USD
Free Shipping
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338357
Part#: 31222282670
Ships in 7 Business Days
Sale - Save 31% $ 297.99

This product was last offered at the strikethrough price on
05-29-2026

Starting at $ 204.39 USD
Free Shipping
Sale - Save 31%
$ 297.99

This product was last offered at the strikethrough price on
05-29-2026

Starting at $ 204.39 USD
Free Shipping
This is the direct replacement wheel bearing and hub assembly to fit the front of the E60 M5, E63 M6, E82 1M, and E90/E92 M3. We sell the OE BMW or OEM F.A.G. bearing so you get the highest quality part available. This is the hub with the bearing and it bolts to the carrier (new hardware is recommended, see below).

Replace your wheel bearings when you hear groaning or rumbling sounds from the front. These sounds increase in frequency as speed increases and will get louder as you turn the wheel (and put load on the worn side). Failing wheel bearings can also attribute to annoying 'pad knockback' on the track.

Sold per bearing/hub.

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW M5
2004-2011 E63 BMW M6
Show More Show Less

Build your own Front & Rear Brake Package - E9X M3, E82 1M
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340267
Part#: TMS6066
Ships in 2 Business Days
Sale - Save 7% $ 1,929.99

This product was last offered at the strikethrough price on
07-14-2026

Starting at $ 1,786.61 USD
Free Shipping
Sale - Save 7%
$ 1,929.99

This product was last offered at the strikethrough price on
07-14-2026

Starting at $ 1,786.61 USD
Free Shipping
This brake package for the 2008+ BMW E9X M3 (incl Competition Package) and E82 1M comes with everything you need to perform a major brake overhaul:

Front and rear rotors with hardware - Original BMW brand drilled and floating
Front and rear brake pads
Front and rear pad wear sensors
Brake fluid - low viscosity for street use or high-performance/racing fluid for track use

A complete set of replacement brake components to get your 2008 E90-E92-E93 M3 or 1M Coupe back to factory spec or beyond. Our packages may use OE, OEM, and performance-designed parts that meet our standards for fitment, quality, performance, and durability. You don't have to pay high prices at the dealer to get the same quality and performance.

This package fits the following BMWs:
2011+ E82 BMW 1M
2008+ E90 BMW M3 - Sedan
2008+ E92 BMW M3 - Coupe
2008+ E93 BMW M3 - Convertible
Show More Show Less
Basic Cooling System Service Kit - E9X M3 S65
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:557214
Part#: E9XM3BCKT
Ships in 3 Business Days
$ 614.99

This product was last offered at the strikethrough price on
04-07-2026

$ 552.99 USD
Free Shipping
$ 552.99 USD
Free Shipping
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:22196336
Part#: BEARINGBOLTARPKT
In Stock
$ 1,799.99

This product was last offered at the strikethrough price on
09-01-2026

$ 1,781.99 USD
Free Shipping on orders $49 and up
$ 1,781.99 USD
Free Shipping on orders $49 and up
Includes WPC Treated Genuine BMW Bearings, ARP Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz


Basic Cooling System Service Kit - E9X M3 S65 - Dry
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:53891614
Part#: 17112283500KT
Ships in 3 Business Days
New Item
$ 540.99

This product was last offered at the strikethrough price on
07-08-2026

$ 524.99 USD
Free Shipping on orders $49 and up
$ 524.99 USD
Free Shipping on orders $49 and up
Packaged by Turner - Corporate Logo
T#:11950
Part#: E9XM3MOUNTKIT
In Stock
$ 656.08

This product was last offered at the strikethrough price on
08-28-2026

$ 653.22 USD
Free Shipping
$ 653.22 USD
Free Shipping
Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

This package is for cars NOT equipped with the EDC suspension.

Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs without EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
  • Show More Show Less
    M3 Driveshaft Rebuild Kit - E9X S65
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:24212292
    Part#: E9X65FLXCVKT
    Ships in 1-2 days
    $ 878.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 820.99 USD
    Free Shipping on orders $49 and up
    $ 820.99 USD
    Free Shipping on orders $49 and up
    Replaces your Flex Disc, CV Joint, and Center Mount

    F8X M3/M4 Blue Brakes Upgrade For E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:388237
    Part#: 004038ECS04B
    Ships in 4 Business Days
    Sale - Save 10% $ 5,261.99

    This product was last offered at the strikethrough price on
    09-03-2026

    Starting at $ 4,735.79 USD
    Free Shipping
    Sale - Save 10%
    $ 5,261.99

    This product was last offered at the strikethrough price on
    09-03-2026

    Starting at $ 4,735.79 USD
    Free Shipping

    As an E9X M3 owner, do you feel short-changed in the braking department? The next gen M3/M4 got serious Brembo calipers. With a special bracket the front 6-piston calipers can fit the E9X M3 for a bolt-on caliper and rotor upgrade. The rotors in this kit are 382x36mm - 22mm larger and 6mm thicker than the stock E9X rotor (and slightly bigger than the stock M3/M4 disc). The larger front rotors will help manage and dissipate heat better than the smaller stock rotors. And a larger rotor and caliper mean stronger brakes. Testing has shown the brake bias is very close to a stock E9X M3. Upgraded rear rotors are also included to work with the stock rear calipers. These are the blue M3/M4 calipers with the ///M logo.

    Front brake specs:

    • 382x36mm 2-piece floating rotors - 50% larger surface area and more cooling vanes
    • 6-piston Brembo caliper (blue)
    • Custom brake caliper bracket to fit the E9X M3 hub
    • Multiple pad options
    • Stainless brake lines

    Rear brake specs:

    • 350x24 2-piece floating rotors (same size as stock)
    • re-use stock calipers
    • Multiple pad options
    • Stainless brake lines

    Wheel fitment notes:

    • 19" wheels required 
    • Wheel spacers may also be required depending on wheel design
    • Slight bending of front dust shields is requried

     

    *Will not ZCP Wheels* 

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:391555
    Part#: S65LPPK-BELTKT
    Ships in 1-2 days
    $ 928.99 USD
    Free Shipping
    $ 928.99 USD
    Free Shipping
    We’ve put together the Ultimate Belt & Tensioner Renewal Kit, curated specifically for M3 owners running our Turner E9X M3 Pulley Upgrade. Designed to restore factory fresh mechanical precision while maintaining high performance reliability
    Show More Show Less
    S65 Timing Chain Kit - E90, E92, M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:55353596
    Part#: 11317838479KT2
    Ships in 4 Business Days
    New Item
    Sale - Save 4% $ 1,495.99

    This product was last offered at the strikethrough price on
    08-17-2026

    $ 1,438.93 USD
    Sale - Save 4%
    $ 1,495.99

    This product was last offered at the strikethrough price on
    08-17-2026

    $ 1,438.93 USD

    Packaged by Turner - Corporate Logo
    T#:557321
    Part#: E9XM3PCKT2
    Ships in 3 Business Days
    $ 2,322.15

    This product was last offered at the strikethrough price on
    08-24-2026

    $ 2,285.66 USD
    Free Shipping
    $ 2,285.66 USD
    Free Shipping
    To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative!
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557320
    Part#: E9XM3PCKT
    Ships in 3 Business Days
    $ 2,336.08

    This product was last offered at the strikethrough price on
    08-24-2026

    $ 2,299.59 USD
    Free Shipping
    $ 2,299.59 USD
    Free Shipping
    To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative!
    Show More Show Less

    Complete Valve Cover Gasket Kit - BMW S65 4.0L
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:28869570
    Part#: 11127838271TKT
    Ships in 7 Business Days
    $ 323.99

    This product was last offered at the strikethrough price on
    06-05-2026

    $ 300.99 USD
    Free Shipping on orders $49 and up
    $ 300.99 USD
    Free Shipping on orders $49 and up
    If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.
    Show More Show Less

    European Socket Starter Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41695009
    Part#: EUROHEADSET1KT
    Ships on Oct 22, 2026
    Sale - Save 18% $ 124.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 102.15 USD
    Free Shipping on orders $49 and up
    Sale - Save 18%
    $ 124.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 102.15 USD
    Free Shipping on orders $49 and up
    Exceptional tools designed to handle all types of European fasteners with ease.
    Turner E90/E92/E93 M3 S65 Performance Package - Stage 1
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:394628
    Part#: E9XMS65PPSTG1
    Ships on Feb 12, 2027
    Sale - Save 28% $ 1,749.99

    This product was last offered at the strikethrough price on
    06-14-2026

    Starting at $ 1,253.49 USD
    Free Shipping
    Sale - Save 28%
    $ 1,749.99

    This product was last offered at the strikethrough price on
    06-14-2026

    Starting at $ 1,253.49 USD
    Free Shipping
    Turner's Stage 1 performance package for E90, E92, E93 M3 delivers a one-two punch with the easiest no-downside upgrades for the S65: Turner Stage 1 Performance Software and Power Pulley.
    Rear Toe Control Arm - E82 1M, E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338097
    Part#: 33322283549
    Back Ordered
    Starting at $ 89.14 USD
    Free Shipping
    Starting at $ 89.14 USD
    Free Shipping
    This arm controls the toe alignment in the M3 rear suspension. When these bushings wear out the tire loses toe control and the tire has too much lateral in/out movement. This can make the handling feel very nervous and imprecise and like the rear end is steering itself.

    The rear toe arm is sold per side (both sides are the same). We offer this as the Original BMW part.

    This item fits the following BMWs:
    2012-2013 E82 BMW 1M Coupe
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible
    This fits 1M/M3 models only. It is not used on non-M models.
    Show More Show Less


    Wheel Stud Conversion Kit - Full Set - 70mm
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507797
    Part#: 001467ECSB2KT2
    In Stock
    New Item
    $ 247.34 USD
    Free Shipping on orders $49 and up
    This M12x1.5 stud conversion kit streamlines your wheel swaps, giving you a permanent guide rail every time you mount a wheel. At 70mm in length, these hardened studs provide sufficient thread engagement for track ready setups with or without wheel spacers. Included in the kit is a full set of Mishimoto high-strength 7075-T6 forged aluminum locking lug nuts.
    Show More Show Less
    Throttle Body Actuator - Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644244
    Part#: 136278380850KT
    In Stock
    $ 2,201.99 USD
    Free Shipping on orders $49 and up
    If your M3 has recently gone into "limp mode" and tripped some engine codes, you may have a faulty throttle body actuator. The plastic gear teeth become rounded and broken over time, resulting poor or no throttle response to your input.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:56471646
    Part#: 61131392246KT2
    Ships in 1-2 days
    New Item
    $ 28.75 USD
    Free Shipping on orders $49 and up
    This targeted harness repair kit allows you to rebuild the ABS sensor interface using genuine BMW terminal hardware. Designed to cure intermittent fault codes, wheel speed signal dropouts, and limp mode triggers
    Show More Show Less

    Oil Service Tool Kit - S65
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56616372
    Part#: OC-03KT2
    In Stock
    New Item
    $ 70.99 USD
    Free Shipping on orders $49 and up
    The Turner Motorsport Oil Service Kit combines two garage tools designed to streamline your oil changes with paddock proven reliability. Our 36mm 6-Point Oil Filter Socket engages directly with the housing's hex flats delivering zero slip torque transfer so you can break cap torque cleanly every single time. Complementing the socket is our 1/2-Turn Lock In Funnel, engineered to thread directly into your filler neck.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:15677519
    Part#: 112478345220KT
    In Stock
    Sale - Save 2% $ 1,596.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,567.05 USD
    Free Shipping on orders $49 and up
    Sale - Save 2%
    $ 1,596.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,567.05 USD
    Free Shipping on orders $49 and up
    Includes WPC Treated Genuine BMW Bearings, Genuine BMW Connecting Rod Bolts, 9 Qts OEM Castrol 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz
    Wheel Stud Conversion Kit - Full Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56327204
    Part#: 001467ECSBLKT2
    In Stock
    New Item
    $ 193.99 USD
    Free Shipping on orders $49 and up
    Converting your BMW’s hub assembly to a dedicated wheel stud system makes wheel changes faster, safer, and far less frustrating. This kit pairs a complete set of 56mm hardened wheel studs with striking Blue Mishimoto Aluminum Locking Lug Nuts
    Show More Show Less

    Front & Rear Brake Service Kit - BMW E82 1 M, E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:49300370
    Part#: TE9XM3BSKT
    In Stock at Vendor
    Sale - Save 2% $ 1,580.70

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,547.51 USD
    Sale - Save 2%
    $ 1,580.70

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,547.51 USD
    When it comes to servicing your front and rear brakes on your BMW, Turner Motorsport has your back. Our all-inclusive kit is designed to streamline your brake service, ensuring a hassle-free afternoon of maintenance. We've gathered all the essential components you need for a quality front and rear brake service into one convenient package. The Turner Motorsport brake service kit includes front and rear rotors, pads, sensors, assembly grease, and set screws, making your brake replacement a breeze.
    Show More Show Less
    ACL Rod Bearing Set - With Genuine BMW Bolts
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710769
    Part#: 8B1580HSTDKT-KT
    In Stock
    $ 540.99 USD
    Free Shipping on orders $49 and up
    Includes upper and lower bearing shells for a complete rod bearing replacement.

    Differential Service Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15744025
    Part#: 331175250640-KT
    In Stock
    Sale - Save 5% $ 274.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 260.74 USD
    Free Shipping on orders $49 and up
    Sale - Save 5%
    $ 274.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 260.74 USD
    Free Shipping on orders $49 and up
    Often overlooked, scheduled rear differential service is very important. Over time gear lube breaks down causing bearings and internal components fail. Regular maintenance will keep your vehicle running properly for years to come. Three bottle of Genuine BMW Limited Slip Gear Lube 1 New Genuine BMW Drain/Fill plugs 1 ECS Magnetic Differential Oil Drain Plug Drain plug O-ring
    Show More Show Less

    Rear Brake Service Kit - BMW E82 1 M, E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:49161667
    Part#: E9XM3RBSKT
    In Stock at Vendor
    Sale - Save 2% $ 765.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 751.15 USD
    Sale - Save 2%
    $ 765.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 751.15 USD
    When it comes to servicing your rear brakes on your BMW, Turner Motorsport has your back. Our all-inclusive kit is designed to streamline your brake service, ensuring a hassle-free afternoon of maintenance. We've gathered all the essential components you need for a quality rear brake service into one convenient package. The Turner Motorsport brake service kit includes rear rotors, pads, sensors, assembly grease, and set screws, making your brake replacement a breeze.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241346
    Part#: E9XPERFSUSF2KT
    In Stock
    Sale - Save 3% $ 2,538.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,462.36 USD
    Free Shipping
    Sale - Save 3%
    $ 2,538.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,462.36 USD
    Free Shipping
    Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload For more detailed information on individual parts please view the kit contents section at the bottom of the page.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:15644246
    Part#: 114278379970KT
    In Stock
    Sale - Save 7% $ 182.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 169.66 USD
    Free Shipping on orders $49 and up
    Sale - Save 7%
    $ 182.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 169.66 USD
    Free Shipping on orders $49 and up
    To keep your Ultimate Driving Machine performing flawlessly, Turner recommends performing oil changes every 5,000-10,000 miles, depending on driving habits. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. Turner Motorsport is here to help you keep your car in great condition.
    Show More Show Less


    Front Brake Service Kit - BMW E82 1 M, E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:49161664
    Part#: E9XM3FBSKT
    In Stock at Vendor
    Sale - Save 2% $ 815.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 796.36 USD
    Sale - Save 2%
    $ 815.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 796.36 USD
    When it comes to servicing your front brakes on your BMW, Turner Motorsport has your back. Our all-inclusive kit is designed to streamline your brake service, ensuring a hassle-free afternoon of maintenance. We've gathered all the essential components you need for a quality front brake service into one convenient package. The Turner Motorsport brake service kit includes front rotors, pads, sensors, assembly grease, and set screws, making your brake replacement a breeze.
    Show More Show Less
    Castrol TWS 10W-60 Engine Oil & Oil Storage Bag Combo
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507815
    Part#: 83292158848KT5
    In Stock
    New Item
    $ 25.81 USD
    Free Shipping on orders $49 and up
    This kit packs one quart of high shear Castrol Edge Euro Car 10W-60 alongside a Genuine BMW Trunk Storage Bag. Whether you're topping off between track sessions or keeping a spare quart handy in your daily driver, this kit secures your oil right where you need it
    Show More Show Less
    High-Performance Rear Brake Service Kit - E9X M3 / E82 1M
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:38330027
    Part#: 001004ECS02AKT4
    In Stock
    Sale - Save 5% $ 1,346.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,283.73 USD
    Sale - Save 5%
    $ 1,346.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,283.73 USD

    Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

    Kit Includes:

    ECS 2-Piece Semi-Floating Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

    Show More Show Less

    Ignition Service Kit - S65 E90, E92, M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677515
    Part#: 12137841754-KT
    Ships in 1-2 days
    $ 2,264.99

    This product was last offered at the strikethrough price on
    06-08-2026

    $ 2,250.99 USD
    Free Shipping on orders $49 and up
    $ 2,250.99 USD
    Free Shipping on orders $49 and up
    Your ignition system will start to fail with age, which will ruin your fuel economy as well as your performance. Turner Motorsport has created a kit that includes new coils, plugs, and hardware. This particular kit utilizes OEM and aftermarket components. See kit contents tab for a complete list of included components
    Show More Show Less

    High-Performance Front Brake Service Kit - E9X M3 / E82 1M
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:38330021
    Part#: 34112283802KT3
    In Stock
    Sale - Save 30% $ 1,202.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 836.78 USD
    Sale - Save 30%
    $ 1,202.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 836.78 USD

    Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

    Kit Includes:

    Zimmermann Cross-Drilled & Slotted Rotors (Front) ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

    Show More Show Less
    High-Performance Rear Brake Service Kit - E9X M3 / E82 1M
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:38330025
    Part#: 34212283803KT4
    In Stock
    Sale - Save 20% $ 599.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 481.93 USD
    Sale - Save 20%
    $ 599.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 481.93 USD

    Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

    Kit Includes:

    ECS V5 Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

    Show More Show Less

    High-Performance Front Brake Service Kit - E9X M3 / E82 1M
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:38330023
    Part#: 001004ECS01AKT6
    In Stock
    Sale - Save 3% $ 1,209.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,173.63 USD
    Sale - Save 3%
    $ 1,209.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,173.63 USD

    Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

    Kit Includes:

    ECS 2-Piece Semi-Floating Cross-Drilled & Slotted Rotors (Front) ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensors ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:56254753
    Part#: B8800120KT2
    In Stock
    New Item
    $ 177.99 USD
    Free Shipping on orders $49 and up
    Combining a heavy duty hub adapter with dedicated slide hammer and impact force screw attachments, this kit is built for serious mechanics and track day drivers who need unyielding strength to get the job done right the first time.
    Show More Show Less

    King Bearings S65 Performance Rod Bearing Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56218621
    Part#: CR8066GPCKT2
    In Stock
    New Item
    $ 1,219.99 USD
    Free Shipping on orders $49 and up
    We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:55317707
    Part#: IRPUSSKT2
    In Stock
    New Item
    $ 552.99 USD
    Free Shipping on orders $49 and up
    Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.
    Packaged by Turner - Corporate Logo
    T#:56218624
    Part#: CR8066GPCXKT2
    In Stock
    New Item
    $ 1,219.99 USD
    Free Shipping on orders $49 and up
    We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s X-series Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:56507816
    Part#: 83292158848KT6
    In Stock
    New Item
    Sale - Save 9% $ 21.99

    This product was last offered at the strikethrough price on
    09-01-2026

    $ 19.99 USD
    Free Shipping on orders $49 and up
    Sale - Save 9%
    $ 21.99

    This product was last offered at the strikethrough price on
    09-01-2026

    $ 19.99 USD
    Free Shipping on orders $49 and up
    This kit packs one quart of high shear Liqui Moly Race Tech GT1 10w-60 alongside a Genuine BMW Trunk Storage Bag. Whether you're topping off between track sessions or keeping a spare quart handy in your daily driver, this kit secures your oil right where you need it
    Show More Show Less


    Roundel Refresh Kit - E92
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:26771756
    Part#: RRFRSH-92KT2
    In Stock
    $ 268.99 USD
    Free Shipping on orders $49 and up
    We’ve bundled everything you need into one convenient, no nonsense kit to instantly restore that factory fresh, crisp look to your BMW's exterior, with a subtle touch of modern motorsport flair.
    S65 High Performance Rod Bearing And Bolt Set - E9x
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:55857735
    Part#: S65BABKT2
    In Stock
    New Item
    $ 547.99 USD
    Free Shipping on orders $49 and up
    We’ve packaged the ultimate preventative maintenance solution to keep your high-revving 4.0L V8 screaming all the way to its 8,400 RPM redline with peace of mind. This kit combines the industry's most trusted bearings with high-strength fasteners to eliminate the S65’s biggest Achilles' heel.
    Show More Show Less