BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Bosch - Corporate Logo
T#:385216
Part#: 13647838440
In Stock
$ 93.31

This product was last offered at the strikethrough price on
07-23-2026

$ 72.83 USD
Free Shipping
$ 72.83 USD
Free Shipping
Replace clogged or failed injectors to restore drivability and performance
BE Bearings - Corporate Logo
T#:403653
Part#: BE-CRB50-S65
Ships on Nov 2, 2026
$ 294.99 USD
Free Shipping
$ 294.99 USD
Free Shipping
Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.
Show More Show Less
BE Bearings - Corporate Logo
T#:403655
Part#: SP1527HKSTDS65
In Stock
$ 589.00 USD
Free Shipping
$ 589.00 USD
Free Shipping

BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

  • Designed specifically for BMW S65B40 engines
  • Silver-oxide coating withstands 30% more load capacity
  • Improved performance under low-oil and boundary conditions
  • Stronger backing material for enhanced durability
  • Corrects factory BMW rod bearing clearance issue
  • Ideal for high-horsepower applications and factory 10W60 weight oils
  • Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

  • 2008-2013 E9X BMW M3 (S65)
Show More Show Less

Bosch - Corporate Logo
T#:19449
Part#: 16137193479
In Stock
$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping
Replace the defective leak diagnosis pump -often referred to as the "DTML pump" - on your BMW with this OEM unit from Bosch. This part detects vapor leaks in the fuel evaporative system.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i 135is 1M Coupe
2002-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2002-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010-3/2012 F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
3/2012+ F07 BMW 550i GT, 550i xDrive GT
2011-3/2012 F10 BMW 528i (N52) 528i xDrive 535i 535i xDrive 550i 550i xDrive
3/2012+ F10 BMW 550i 550i xDrive
2004-2010 E63 BMW 645ci 650i M6
2012-3/2012 F12 BMW 640i 650i 650i xDrive
3/2012+ F12 BMW 650i 650i xDrive
2002-2006 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2011+ F25 BMW X3 xDrive35i
2002-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35i X5 xDrive48i X5 xDrive50i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2002-2002 Z3 BMW Z3 2.5i Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2002-2003 E52 BMW Z8 Roadster
Show More Show Less

ECS - Corporate Logo
T#:48367010
Part#: 059226LA01
In Stock
Sale - Save 3% $ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping
Sale - Save 3%
$ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12427549393, 12427795404, and 12427790559.

Show More Show Less
Ina - Corporate Logo
T#:304220
Part#: 11287530314
In Stock
$ 84.99

This product was last offered at the strikethrough price on
08-12-2026

$ 59.49 USD
Free Shipping
$ 59.49 USD
Free Shipping

This is an OEM INA�mechanical tensioner for the serpentine belt. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM Bosch Fuel Injector - N55 N20 Engine - EU5 Designation
For vehicles with production date from 01/2011
Bosch - Corporate Logo
T#:384546
Part#: 13647597870
In Stock
$ 165.99

This product was last offered at the strikethrough price on
05-11-2026

$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU5 designation before purchase. This fuel injector will not work with later EU6 version fuel rails and injector; non-exchangeable. Replaces Genuine BMW part # 13647597870 and requires BMW part # 13537577649 for installation.
Show More Show Less
ECS 75A Durometer Engine Mount - Pair - E36 E46 E9x Z3 Z4
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:1887246
Part#: 1181228379812KT
In Stock
Sale - Save 25% $ 197.99

This product was last offered at the strikethrough price on
06-14-2026

$ 148.48 USD
Free Shipping
Sale - Save 25%
$ 197.99

This product was last offered at the strikethrough price on
06-14-2026

$ 148.48 USD
Free Shipping
With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible. These mounts are an upgrade for non-M E36/E46 owners seeking a stiffer mount without sacrificing comfort and ride quality.
Show More Show Less

Bosch - Corporate Logo
T#:14676
Part#: 11787558055
In Stock
$ 203.99

This product was last offered at the strikethrough price on
07-14-2026

$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This is the OEM Bosch oxygen sensor for BMW's with the N52 & N54 engines. This sensor is mounted in the front downpipe before the catalytic converter. Bosch part number 17098.

This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2011 E82 BMW 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2007-2013 E93 BMW 335i 335is - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Bosch - Corporate Logo
T#:14660
Part#: 11787537984
In Stock
$ 167.99

This product was last offered at the strikethrough price on
06-17-2026

$ 165.99 USD
Free Shipping
$ 165.99 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

This is the pre-cat oxygen sensor. This is a OEM replacement part for BMW part # 11787558073 and .

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Show More Show Less
ECS - Corporate Logo
T#:363147
Part#: 003296ECS01
Ships in 2 Business Days
Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
Sale - Save 25%
$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.
OEM INA Belt Tensioner - E9X E82 E60 E82 with N54 engine
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19305
Part#: 11287563927
In Stock
$ 107.99

This product was last offered at the strikethrough price on
04-15-2026

$ 72.50 USD
Free Shipping
$ 72.50 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N54 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less


New OEM Bosch Starter Motor - N52, N54, N55, up to 03/11
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 249.17

This product was last offered at the strikethrough price on
08-14-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less
ECS Tuning Thermostat Cover Upgrade Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:6924312
Part#: 090744ECS09
Back Ordered
Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 67.99 USD
Free Shipping
Sale - Save 15%
$ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 67.99 USD
Free Shipping
This ECS Tuning Anodized Aluminum Thermostat Cover Plate is a simple way to add a bespoke look to your engine bay. If you have replaced your oil thermostat or deleted your cooler, now is the perfect time for this mod. Installs in minutes and ensures a positive seal for the oiling system. Features: Anodized Black Includes hardware and seal Heatsink fins for added cooling
Show More Show Less
Bosch - Corporate Logo
T#:1722
Part#: 12120034087
In Stock
$ 95.94 USD
Free Shipping
$ 95.94 USD
Free Shipping
Set of six replacement spark plugs for your N54 powered BMW

OEM Bosch Fuel Injector - EU5 Designation - E70/71 E82/88 E9X F07/10,...
For vehicles with EU5 injectors and a production date up 01/2011
Bosch - Corporate Logo
T#:585575
Part#: 13537568607
In Stock
$ 185.99

This product was last offered at the strikethrough price on
04-21-2026

$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Rough idle, misfire, or check engine light are a common problem when you have faulty fuel injectors. Fuel injectors for turbocharged BMWs have been a common failure item. Replace your injectors with this brand new injector from BMW to restore power and proper engine operation. EU5 Designation This is a replacement for Genuine BMW part # 13537568607. Requires BMW part # 13537577649 as well prior to installation for each injector.
Show More Show Less

OEM INA Accessory Belt Tensioner Assembly - N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386297
Part#: 11287582946
In Stock
$ 115.99

This product was last offered at the strikethrough price on
09-16-2026

$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N55 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM Bosch High-Pressure Fuel Pump & Fuel Filter - N55 3.0L
For vehicles with a production date from 03/2014 - Also fits models up to 03/2014 with ...
Bosch - Corporate Logo
T#:568683
Part#: 13518604231
In Stock
$ 311.99 USD
Free Shipping
$ 311.99 USD
Free Shipping
This is Bosch's updated high pressure fuel pump "HPFP" for BMW's with the N55 turbo engine. This fuel pump is the OEM equivalent to BMW part number 13518604231 and supersedes BMW part number 13517610761. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Bosch - Corporate Logo
T#:14677
Part#: 11787558073
In Stock
$ 250.99

This product was last offered at the strikethrough price on
04-22-2026

$ 167.75 USD
Free Shipping
$ 167.75 USD
Free Shipping

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.

This is the OEM Bosch oxygen sensor for BMW's with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Bosch part number 17099. OEM replacement for BMW # 11787558073 and 11787537984.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i

Show More Show Less
Bosch - Corporate Logo
T#:397340
Part#: 11787596924
In Stock
$ 163.84

This product was last offered at the strikethrough price on
05-19-2026

$ 162.15 USD
Free Shipping
$ 162.15 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Show More Show Less

Bosch - Corporate Logo
T#:3858153
Part#: 13537568607KT1
In Stock
$ 1,214.99

This product was last offered at the strikethrough price on
04-21-2026

$ 820.99 USD
Free Shipping
$ 820.99 USD
Free Shipping
Includes 6 Bosch EU5 Fuel Injectors and Genuine BMW decoupling rings.

Bosch - Corporate Logo
T#:14678
Part#: 11787558087
In Stock
$ 200.14

This product was last offered at the strikethrough price on
08-13-2026

$ 198.75 USD
Free Shipping
$ 198.75 USD
Free Shipping
This direct fit OEM Bosch oxygen sensor plugs directly into your factory connector. Fits N54 engine 1 series, 3 series and Z4. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011 E92 BMW 335is - Coupe
2007-2010 E93 BMW 335i - Convertible
2009-2010 Z4 BMW Z4 sDrive35i
Show More Show Less
Ina - Corporate Logo
T#:12545
Part#: 11287530314K
In Stock
$ 67.99 USD
Free Shipping
$ 67.99 USD
Free Shipping
This is the mechanical tensioner for the serpentine belts on BMW's with the N52 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system. Kit includes 11287530314 tensioner and 11287530315 aluminum bolt.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2012 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
Bosch - Corporate Logo
T#:374247
Part#: 11787545075
In Stock
$ 137.99

This product was last offered at the strikethrough price on
04-25-2026

$ 137.64 USD
Free Shipping
$ 137.64 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


Rogue Engineering - Corporate Logo
T#:553839
Part#: PP.S65.V8.B
Ships in 7 Business Days
$ 295.00 USD
Free Shipping
$ 295.00 USD
Free Shipping
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Show More Show Less
Bosch - Corporate Logo
T#:374246
Part#: 11787545074
In Stock
$ 228.99 USD
Free Shipping
$ 228.99 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
BMW N20 N55 Single Injector Replacement Kit
For vehicles with production date from 02/2012
Bosch - Corporate Logo
T#:590992
Part#: 13648625397SKT
In Stock
$ 162.99

This product was last offered at the strikethrough price on
06-22-2026

$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping

BMW N20 N55 Single Injector Replacement Kit is an essential upgrade for maintaining optimal engine performance. Designed to replace faulty injectors and ensure smooth operation, this kit from Turner Motorsport offers a reliable solution for BMW vehicles. It’s crucial to visually inspect the numbers on your existing injectors to confirm proper fitment before installation.

  • Comprehensive Kit: Includes 1 EU-6 injector, 1 decoupling ring, and 1 gasket ring for a complete replacement.
  • Enhanced Performance: Replaces malfunctioning injectors to restore engine efficiency and drivability.
  • Easy Installation: Designed for straightforward installation with included components.
  • Quality Assurance: Turner Motorsport provides high-quality parts to ensure durability and long-lasting performance.

Turner Motorsport’s BMW N20 N55 Single Injector Replacement Kit helps maintain engine performance and reliability by providing essential components for injector replacement.

Show More Show Less

Bosch - Corporate Logo
T#:372884
Part#: 15733
In Stock
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.
Show More Show Less

OEM Bosch Remanufactured Starter -- N52 N54 N55 3.0L
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:377503
Part#: 12412344243KT1
In Stock
$ 244.00

This product was last offered at the strikethrough price on
08-24-2026

$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping

If your starter has died and your car will no longer turner over, Bosch's replacement unit is the perfect high quality replacement. OEM replacement for BMW part # 12412354701, 12412344243, and 12417526236.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Includes a $65 core charge.

Show More Show Less
E82 135i, E9X 335i, E60 535i ECS Baffled Oil Catch Can
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:388332
Part#: 003779ECS05A0
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD
Free Shipping
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD
Free Shipping

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. A dipstick is integrated into the cap so you can monitor the oil level. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. Multiple brackets are available so you're not limited on where to mount it. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

Show More Show Less

Single Injector Replacement Kit
For vehicles with production date from 01/2011
Bosch - Corporate Logo
T#:590987
Part#: 13647597870SKT
In Stock
$ 194.49

This product was last offered at the strikethrough price on
05-11-2026

$ 162.14 USD
Free Shipping
$ 162.14 USD
Free Shipping
VF Engineering - Corporate Logo
T#:378755
Part#: VFK91-02
Ships on Oct 28, 2026
13% off MSRP $ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD
Free Shipping
13% off MSRP
$ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD
Free Shipping
BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.
Show More Show Less

Bosch - Corporate Logo
T#:373812
Part#: 12317558220KT1
Ships in 2 Business Days
$ 1,007.99

This product was last offered at the strikethrough price on
05-07-2026

$ 704.99 USD
Free Shipping
$ 704.99 USD
Free Shipping
Replace your dead alternator with this new unit and make sure your battery is being charged properly. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products. Includes a $195.00 core charge to be refunded after we receive your refundable core.
Show More Show Less

Bosch - Corporate Logo
T#:639734
Part#: 12317837981BKT
Ships in 2 Business Days
$ 526.99

This product was last offered at the strikethrough price on
05-07-2026

$ 513.99 USD
Free Shipping
$ 513.99 USD
Free Shipping
*Price includes a refundable $75 Core Charge* The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Bosch Part Numbers: AL9454X, 0986UR6290 Replaces the following BMW part numbers: 12317837981, 12317838656
Show More Show Less
Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)
For vehicles with a production date up to 05/2008 with single drive belt.
Rogue Engineering - Corporate Logo
T#:553840
Part#: PP.S65.V8.A
Ships in 9 Business Days
$ 295.00 USD
Free Shipping
$ 295.00 USD
Free Shipping
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Show More Show Less
ECS Tuning N54 Baffled Oil Catch Can System - E9x, E8x
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:391689
Part#: 003779ECS
In Stock
Sale - Save 17% $ 356.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 296.17 USD
Free Shipping
Sale - Save 17%
$ 356.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 296.17 USD
Free Shipping

Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

The ECS Engineers were able to get more effective results compared to the competition by routing all blow by gasses through the high-load PCV circuit to ensure the catch can is functioning under all engine operating conditions.  The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The ECS Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation.  Having a kit designed specifically for your E8X 135i or E9X 335i makes for a clean looking setup that any skill level mechanic can install. 


The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance. Having a kit designed for the E9x 335 makes install easy and clean looking so any skill level mechanic can end up with professional results.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

*Click here for installation instructions*

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2007-2010 E9X BMW 335i 335xi
 

Show More Show Less


TurboSmart - Corporate Logo
T#:4921469
Part#: TS-0551-1012
Ships on Oct 28, 2026
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Show More Show Less
Bosch - Corporate Logo
T#:384253
Part#: 12317551256KT
Ships on Nov 5, 2026
$ 661.99

This product was last offered at the strikethrough price on
09-09-2026

$ 629.99 USD
Free Shipping
$ 629.99 USD
Free Shipping
This is a OEM Bosch remanufactured 180 amp alternator. BMW Alternators are built especially for extremes of heat, cold and high demand. Your BMW deserves nothing less than the best, which is why an OEM Bosch Alternator is the best option. BMW alternators are built to last using the highest quality materials and the most technologically advanced processes. All alternator parts are 100% factory tested prior to and during remanufacturing to assure that they meet or exceed original equipment specifications. And every alternator is fully load tested to guarantee compliance with BMW's strict performance specifications. 

A $84 core charge is included in the price. Upon receipt of your rebuildable alternator core, you will be refunded the core charge.  

This item fits the following BMWs:  
E60 BMW 528i/xi
E82/88 BMW 128i
E9X BMW 328i/xi
E70 BMW X5 N52 3.0L (without Adaptive Drive and Four-Zone Climate Control)
E83 BMW X3 N52 3.0L
Show More Show Less
Schrick - Corporate Logo
T#:2474
Part#: TMS2474
Ships on Feb 1, 2027
$ 6,478.60 USD
Free Shipping
$ 6,478.60 USD
Free Shipping
This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.
Show More Show Less

Schrick - Corporate Logo
T#:2500
Part#: TMS2500
Ships on Feb 1, 2027
$ 6,478.60 USD
Free Shipping
$ 6,478.60 USD
Free Shipping
This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.
Show More Show Less

ECS Tuning Oil Cooler Kit - BMW E9X N54 N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with a stock oil cooler only!
ECS - Corporate Logo
T#:6924307
Part#: 090749ECS09
Special Order: No Guaranteed ETA
Sale - Save 5% $ 452.99

This product was last offered at the strikethrough price on
06-14-2026

$ 430.34 USD
Free Shipping
Sale - Save 5%
$ 452.99

This product was last offered at the strikethrough price on
06-14-2026

$ 430.34 USD
Free Shipping
BMW's N54 & N55 engines are very capable motors, but one drawback can be high oil temps. Even on vehicles with a factory oil cooler, oil temps can start to run away during extended track sessions or in very hot climates. This can lead to reduced horsepower, unintended engine and bearing wear, and even complete engine failure if not properly handled. ECS Tuning has an answer for just this problem, a Performance Oil Cooler Kit. This kit is easily installed behind the kidney grilles in addition to the stock cooler (located in the lower front bumper), receiving significantly higher amounts of fresh air and doubling the cooling capacity! Kit Includes: Oil Cooler Radiator Two Braided Oil Lines w/ AN Fittings Oil Distribution Block w/ AN Ports Distribution Block Mounting Bolt NOTE: Installation of the oil cooler radiator may require drilling out mounting holes depending on the selected location. Mounting hardware for the oil cooler is not included. Professional installation is recommended!
Show More Show Less
ECS Tuning N54 PCV Valve Upgraded - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:4154602
Part#: 090745ECS09
Special Order: No Guaranteed ETA
Sale - Save 25% $ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD
Free Shipping
Sale - Save 25%
$ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD
Free Shipping
The OEM plastic Positive Crankcase Ventilation (PCV) valve does not hold pressure well, even when brand new. This means that when you are in boost conditions, the highly pressurized PCV valve leaks charged air back into the crankcase. Depending on the condition of your PCV valve, this can range from irritating to dangerous. Additionally, if your valve cover is cracked, loose, or has a bad gasket, you are likely experiencing a pressure leak either internally or externally, as well as potential oil loss issues. ECS Tuning now offers a solid aluminum PCV valve upgrade designed to address these issues by preventing leaks and outlasting the standard BMW-designed PCV! The internal components of this aluminum PCV valve fit tighter than the OE design and can withstand significantly more abuse, perfect for high mileage N54s, N54s that have been tuned, or N54s with upgraded turbos (larger twin or big single turbo builds). This may not be your last PCV Valve, but it will certainly outlast both the Genuine BMW and other common aftermarket alternatives!
Show More Show Less

ECS - Corporate Logo
T#:585946
Part#: 11127531224WPC
In Stock
$ 916.99 USD
Free Shipping
$ 916.99 USD
Free Shipping
A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.
Show More Show Less
WPC Treated Cam Bearing Ledge - Intake - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:585945
Part#: 11127550913WPC
In Stock
$ 898.99 USD
Free Shipping
$ 898.99 USD
Free Shipping
A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.
Show More Show Less

VF Engineering - Corporate Logo
T#:378330
Part#: VFAOC-E9MKT
Back Ordered
$ 1,692.99 USD
Free Shipping
$ 1,692.99 USD
Free Shipping
This oil cooler from VF Engineering is the perfect BMW oil cool for your M3. Produced by CSF for VF engineering, this cooler contains desely packed bars and plates for the greatest possible surface area for heat exchange. This oil cooler offers many benefits over stock, including 2 extra rows of even better cooling. In addition, this cooler is compatible with all modifications that the stock cooler is applicable such as a supercharger system.
Show More Show Less