BMW Wheels - Genuine & Performance for BMW 2 Series F22 (2014+)

Dinan has used its extensive knowledge of BMW wheel fitment to use the BBS CH-R product line to its fullest.

Front recommended tire: Michelin Pilot Super Sport or Pirelli P-Zero Corsa - 235/35-19

Rear recommended tire: Michelin Pilot Super Sport or Pirelli P-Zero Corsa - 265/30-19

Features:

One Piece Counter Pressure Cast Wheels (Front: 19" x 8" et45; Rear: 19" x 9" et48)

Weight optimized by FEM analysis (Front: 24 lbs; Rear: 24.9 lbs)

Spun inner rim using BBS Flow Forming Process

Back-milled spoke area

Featuring stainless steel rim protector

Compatible with BMW tire pressure monitors (RDC)

Dinan center caps and centering rings included

Dinan has used its extensive knowledge of BMW wheel fitment to use the BBS CH-R product line to its fullest.

Front recommended tire: Michelin Pilot Super Sport or Pirelli P-Zero Corsa - 235/35-19

Rear recommended tire: Michelin Pilot Super Sport or Pirelli P-Zero Corsa - 265/30-19

Features:

One Piece Counter Pressure Cast Wheels (Front: 19" x 8" et45; Rear: 19" x 9" et48)

Weight optimized by FEM analysis (Front: 24 lbs; Rear: 24.9 lbs)

Spun inner rim using BBS Flow Forming Process

Back-milled spoke area

Featuring stainless steel rim protector

Compatible with BMW tire pressure monitors (RDC)

Dinan center caps and centering rings included

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

• Provide a polished, high-quality look by covering the open center hole
• Are machined from 6061-T5611 aluminum for superior strength and durability
• Feature a hand-brushed finish for a seamless OEM appearance
• Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
• Are sold in sets of four, with center caps not included

Details matter.

That's why we've added Dinan Valve Stem Caps to the ever-expanding product lineup! Sold as a set of 4 aluminum caps, each has a Dinan "egg" logo engraved on the face to accentuate even the smallest of details in your high-performance build.

Features:

Nuanced design for universal visual appeal

Dinan "egg" logo on top

Black finish

Aluminum construction