BMW Brakes & Brake Parts for BMW 4 Series F32 (2014+)

This is a pair (2) of Genuine BMW FRONT brake rotors/discs (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible

These REAR rotors fit F30 328iX/335i/335iX and F32 428iX/435i/435iX models with the optional M Sport Brakes upgrade (option code S2NHA). These rotors are larger than what came on the base, Luxury, Modern, Sport, and M Sport trim packages. The dead giveaway whether or not you have the M Sport option is the rear caliper - the S2NHA option added 2-piston Brembo calipers on the rear while all of the brakes were a standard single piston caliper.

These rotors are the original rear M Sport brakes for the 228/328/428 as well as the 335/435. These are a blank rotor design (no dimples or slots). But they are larger than the standard brake rotors to help in braking performance, especially when driven hard.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs:
2012+ F30 BMW 320iX 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335i 335iX - Gran Turismo
2014+ F32 BMW 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX with N26 engine only 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
N26 engine: the rear rotors were different on the F33 428 convertible based on which engine the car has. N20 is the ULEV engine; N26 is the SULEV low emissions engine. The emissions sticker under the hood will be labeled ULEV or SULEV.

These brake pads are Genuine BMW and will perform exactly the same as the pads your vehicle came with from day one. Genuine pads offer a long life, low dust, and a consistent, comfortable feel that many aftermarket pads do not offer.

This set includes both the front and rear brake pads.

This item fits the following BMWs:
F22/23 BMW 228i (with M Sport Brakes), M235i/xDrive, M240i/xDrive
F30/31/34 BMW 328i/xDrive (with M Sport Brakes), ActiveHybrid 3 (with M Sport Brakes), 335i/xDrive
F32/33/36 BMW 428i/xDrive (with M Sport Brakes), 435i/xDrive

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Are you looking for a fast, easy and affordable braking kit that gives you better braking and brake cooling? Then this Z26 Street Warrior Brake Kit from Power Stop is exactly what you need!

The Z26 Street Warrior Brake Kit includes everything you will need in the box including:

Drilled and Slotted Rotors Extreme Carbon-Fiber Ceramic brake pads Stainless steel hardware New guide-pin bushings High temperature brake lubricant The brake pads included in this kit are the Power Stop Extreme carbon-fiber ceramic brake pads. These create much less dust than stock pads and the compound adds severe-duty stopping power without sacrificing everyday drivability. Also, these pads cut down on brake noise, ensuring noise-free stopping no matter where you are.

In addition, the rotors have been upgraded from stock to ensure that they not only hold up to the rigors of performance braking, but also last as long as possible. To do this they started with precision drilling to give the rotors additional cooling. Next was the addition of rounded slots in the friction surface. This allows gas and debris to be easily wiped away, keeping the contact patch on the rotor clear for smooth, safe braking. Finally, the coated the rotor with a Silver Zinc Dichromate plating to add both looks and rust and corrosion prevention to the rotors as well. This prevents the typical rust lip from forming and keeps the rotor from forming any potential weak points after extended use.

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:

This item fits the following BMWs with their stock braking systems:
2014+ F22 BMW M235i M235iX
2012+ F30 BMW 335i 335xi - Sedan
2014+ F32 BMW 435i 435iX - Coupe
2014+ F33 BMW 435i 435iX - Convertible
2014+ F34 BMW 335iX - Gran Turismo
2014+ F36 BMW 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NHA M Sport brake option:
2014+ F22 BMW 228i 228iX
2012+ F30 BMW 328i 328xi - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F32 BMW 428i 428iX - Coupe
2014+ F33 BMW 428i 428iX - Convertible
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F36 BMW 428i 428iX - Gran Coupe

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of 370mm brake rotors.

This item fits the following BMWs with 370mm M Sport/M Performance brakes:
2012+ F30 BMW 320i 320iX 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Sedan
2012+ F31 BMW 328iX 330iX - Touring Wagon
2012+ F32 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Coupe
2013+ F33 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Convertible
2012+ F34 BMW 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Gran Turismo
2012+ F36 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - GranCoupe