BMW Brakes & Brake Parts for BMW 4 Series F32 (2014+)

Are you looking for a fast, easy and affordable braking kit that gives you better braking and brake cooling? Then this Z26 Street Warrior Brake Kit from Power Stop is exactly what you need!

The Z26 Street Warrior Brake Kit includes everything you will need in the box including:

Drilled and Slotted Rotors Extreme Carbon-Fiber Ceramic brake pads Stainless steel hardware New guide-pin bushings High temperature brake lubricant The brake pads included in this kit are the Power Stop Extreme carbon-fiber ceramic brake pads. These create much less dust than stock pads and the compound adds severe-duty stopping power without sacrificing everyday drivability. Also, these pads cut down on brake noise, ensuring noise-free stopping no matter where you are.

In addition, the rotors have been upgraded from stock to ensure that they not only hold up to the rigors of performance braking, but also last as long as possible. To do this they started with precision drilling to give the rotors additional cooling. Next was the addition of rounded slots in the friction surface. This allows gas and debris to be easily wiped away, keeping the contact patch on the rotor clear for smooth, safe braking. Finally, the coated the rotor with a Silver Zinc Dichromate plating to add both looks and rust and corrosion prevention to the rotors as well. This prevents the typical rust lip from forming and keeps the rotor from forming any potential weak points after extended use.

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Upgrade your BMW's rotors with Power Stop Evolution Tru-Cast Drilled and Slotted Rotors for a cooler performance during spirited driving. These high-quality rotors start with precision machining for OE fitment, ensuring a seamless upgrade. The cooling holes are drilled to exact specifications, enhancing heat dissipation without compromising rotor strength.

• OE fitment for easy installation
• Quick cooling for spirited driving
• Rounded slots for effective debris and gas dispersion
• Constant firm contact between pad and rotor
• Increased lifespan with Silver Zinc Dichromate plating

The rounded slots in the friction surface efficiently direct gas and debris away, ensuring constant, firm contact between the pad and rotor. To enhance longevity and prevent weak points, a Silver Zinc Dichromate plating coats the rotor. These rotors require no modifications, fitting perfectly for both street and track use while keeping temperatures low.

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

This pad set includes pads for both FRONT brakes. 

These Front Brake Pads fit the following BMWs:
2014+ F22 F23 BMW 228i 228i X-Drive
2012+ F30 BMW 320i 328i 328i X-Drive Sedan
2012+ F31 BMW 328i X-Drive Touring Wagon
2012+ F32 BMW 428i 428i X-Drive Coupe
2013+ F33 BMW 428i 428i X-Drive Convertible
2012+ F34 BMW 328i 328i X-Drive Gran Turismo
2012+ F36 BMW 328i 328i X-Drive GranCoupe