BMW 4 Series F36 (2015+)

Like what we do? We hope so. Purchase a Turner Motorsport T-Shirt today and add the Turner colors to your regular t-shirt rotation.

These shirts are premium, New-Era tees - we wouldn't want you to be uncomfortable while sporting the Turner logo.

Available in Black, Grey, and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

High performance ignition kit for your N54/N55 featuring colder stepped spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval! Included plugs are one Step colder for N55, Two step colder for N54.

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

High performance ignition kit for your N20 featuring spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Protect your BMW’s vulnerable underbody components from costly damage with our new Aluminum Skid Plate Kit, an exclusive design for BMW F30, F31, F32, F33, F34, and F36 xDrive models.

From factory, BMW F3X cars are equipped with a fabric undertray. This flexible piece can't withstand the rigors of daily driving, leaving critical parts like the engine oil pan and core support exposed to damage from potholes, speed bumps, and road debris. Upgrade your underbody protection with our durable aluminum skid plate, engineered for superior performance, lasting durability, and improved airflow.

Features & Benefits:

Made from lightweight yet robust 8GA (3.3mm) 5052 aluminum, providing unparalleled underbody protection without adding excessive weight over the front axle. Features a durable one-piece design that ensures strength and resilience against impacts while also replacing the flimsy OEM undertray. High-quality milled aluminum finish for a seamless look that integrates perfectly with your BMW’s underbody components. Optimizes performance by maintaining factory aerodynamics while improving ground clearance and airflow. Includes all necessary mounting hardware for a straightforward installation. Made in the USA! Product Development: In the development stages of this project, our R&D team employed state-of-the-art tools, including FARO laser scanning, SolidWorks 3D CAD modeling, and extensive long-term testing, to create a skid plate that delivers exceptional protection and reliability. This skid plate isn't just an upgrade—it’s a statement of quality and innovation.

Installation: To ensure seamless installation, we've provided an easy-to-follow, step-by-step installation guide. CLICK HERE to view our detailed installation PDF!

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.

From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.

To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.

Features & Benefits:

High-strength 6061 billet aluminum construction
80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness.
Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness).
Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish.
TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount.
A simple bolt-on design makes for an easy install
Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Let's be honest—what's the point of owning a B58-equipped BMW if you can't hear it? The F30 340i and F32/F33 440i feature a bulky, suitcase-style rear muffler assembly that muzzles the B58's turbocharged symphony. While cat-back exhaust systems can be a serious investment, our new muffler delete kit offers a cost-effective alternative that delivers all the sound, style, and performance your BMW deserves.

Our system completely transforms the character of your F3X by replacing the restrictive rear muffler with a high-flowing, TIG-welded stainless steel setup that enhances tone, reduces weight, and maintains factory fitment and finish. The Turner Motorsport Muffler Delete Kit features dual 80mm primary tubing that transitions to adjustable 100mm tip sections for a clean yet aggressive look. Up front, the muffler delete kit attaches to the OEM mid-pipe using factory-style sleeve clamps. The connecting pipe is installed at a factory cut location, creating an easy and reversible modification. At the rear, the included sleeve clamps enable easy adjustment and precise tip placement inside the factory rear diffuser.

Features & Benefits:

TIG-welded dual 80mm primary tubing seamlessly transitions to adjustable, twin slash-cut 100mm tip sections, delivering a bold, refined appearance Straightforward cut-and-clamp installation, 100% reversible Sleeve clamps provide full adjustability for effortless alignment and precise tip positioning Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Installation & Support:

- Click HERE for Installation Instructions -