WPC Treated Cam Bearing Ledge - Intake

10X Entries Into Our F80 M3 Sweepstakes

T#:13299338

Part#: 11127550913WPC2

In Stock

$ 916.99 USD

Add to Wish List

Qty

$ 916.99 USD

Add to Wish List

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

S54 Valve Adjustment Shim Set - With Tools

10X Entries Into Our F80 M3 Sweepstakes

T#:401664

Part#: VSK4KT2

In Stock

$ 143.84 USD

Add to Wish List

Qty

$ 143.84 USD

Add to Wish List

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges.

Includes

Shim set
Installation tool #83300493743
16 Blade Feeler gauge set

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less

ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)

T#:3631

Part#: 201-4303

In Stock

$ 247.99 USD

Add to Wish List

Qty

$ 247.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe

Show More Show Less

Elring Cylinder Head Installation Kit - S52 3.2L

2X Entries Into Our F80 M3 Sweepstakes

T#:367024

Part#: 11129069861

In Stock

$ 214.99 USD

Add to Wish List

Qty

$ 214.99 USD

Add to Wish List

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes everything needed to re-seal your engine's head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
S52 3.2L

Show More Show Less

BMW M20 Engine ARP Head Stud Kit - E30 325i, E34 525i

T#:189783

Part#: 201-4305

In Stock

$ 271.99

This product was last offered at the strikethrough price on
09-24-2026

$ 271.18 USD

Add to Wish List

Qty

$ 271.18 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

S54 Valve Adjustment Kit w/ Wiseco Shims - E46 M3, Z3M, Z4M

10X Entries Into Our F80 M3 Sweepstakes

T#:582210

Part#: S54WVALVESHIMKT

In Stock

Sale - Save 10% $ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 204.66 USD

Add to Wish List

Qty

Sale - Save 10%

$ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 204.66 USD

Add to Wish List

S54 Valve Adjustment Kit - With gaskets

10X Entries Into Our F80 M3 Sweepstakes

T#:582218

Part#: 83300493743

In Stock

$ 247.52 USD

Add to Wish List

Qty

$ 247.52 USD

Add to Wish List

BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

Elring Cylinder Head Bolt Set - E39, E46, E53

2X Entries Into Our F80 M3 Sweepstakes

T#:377047

Part#: 11121740065

In Stock

$ 43.56

This product was last offered at the strikethrough price on
08-12-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Includes all head bolts in one cylinder head

OEM Elring Cylinder Head Bolt Set - E30 E34 M20 2.5L 2.7L

2X Entries Into Our F80 M3 Sweepstakes

T#:2706174

Part#: 11121726478

In Stock

$ 37.99

This product was last offered at the strikethrough price on
07-29-2026

$ 25.19 USD

Add to Wish List

Qty

$ 25.19 USD

Add to Wish List

Brand new set of cylinder head bolts - the cylinder head bolts need to be replaced after removal, once a bolt is torqued down you're unable to reuse it.

ARP Head Stud Kit - N54

T#:24112781

Part#: ARP-HSK-N54-S

Back Ordered

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

ARP ARP2000 Head Stud Kit - N55

T#:42335661

Part#: ARP-HSK-N55-S

Ships in 3 Business Days

$ 743.99 USD

Add to Wish List

Qty

$ 743.99 USD

Add to Wish List

Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

Elring Cylinder Head Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:377135

Part#: 11127548799

Ships in 1 Business Day

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Head bolts are one time use, and under no circumstance should be reused. Head bolts stretch when torqued, and do not return to a non-stretched state.

BMW S14 Engine ARP Head Stud Kit - E30 M3

T#:189786

Part#: 201-4605

In Stock at Vendor

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

ARP Cylinder Head Stud Kit - E9X M3 S65

T#:554124

Part#: 201-4307

Back Ordered

$ 363.99 USD

Add to Wish List

Qty

$ 363.99 USD

Add to Wish List

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Show More Show Less

Cam Bearing Ledge Replacement Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:23748158

Part#: 11127531224TKT

In Stock

$ 1,663.66

This product was last offered at the strikethrough price on
10-22-2026

$ 1,661.16 USD

Add to Wish List

Qty

$ 1,661.16 USD

Add to Wish List

Have your camshaft bearing ledges seen better days? This kit includes everything needed to replace your cam bearing ledges with Genuine BMW and high-quality OEM components. Included in this kit: Intake Cam Bearing Ledge Exhaust Cam Bearing Ledge Valve Cover Gasket Timing Chain Tensioner Cylinder Head Hardware Assembly Lubricant BMW Engine Oil Hengst Oil Filter

Show More Show Less

Cylinder Head Bolts - Set Of 13

2X Entries Into Our F80 M3 Sweepstakes

T#:591559

Part#: 11127560274

In Stock

$ 32.99

This product was last offered at the strikethrough price on
06-22-2026

$ 32.85 USD

Add to Wish List

Qty

$ 32.85 USD

Add to Wish List

Cylinder Head Bolt Set for Engine Maintenance

When it comes to replacing a head gasket or performing internal engine work, this cylinder head bolt set is a must-have for your project. Ensuring a proper seal and assembly, these bolts are essential for refitting the cylinder head to the engine block. Keep in mind that the old bolts are not reusable, so you'll need this new set for a reliable repair. Additionally, depending on your requirements, you may need a new head gasket with either standard or plus thickness for machined heads. The set includes the following bolts:

10 M10x145 head bolts
2 M8x95 bolts
1 M8x35 bolt

Show More Show Less

ARP Head Stud Kit B48 Undercut CA625+, 12pt

T#:48367044

Part#: 401-4704

Ships on Nov 18, 2026

$ 588.99 USD

Add to Wish List

Qty

$ 588.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L

T#:1105898

Part#: 201-4701

Back Ordered

20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

Qty

20% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

OEM Elring Cylinder Head Bolt Set - N20/26 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2602240

Part#: 11122212157

In Stock

$ 75.99

This product was last offered at the strikethrough price on
05-07-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

BMW E28 / E30 / E43 - M20 Complete Cylinder Head Basic Replacement Ki...

10X Entries Into Our F80 M3 Sweepstakes

T#:2810081

Part#: 11121707032-3KT

Ships in 4 Business Days

$ 1,617.62 USD

Add to Wish List

Qty

$ 1,617.62 USD

Add to Wish List

Includes all of the necessary components to service and replace the head on your M20 powered BMW

OEM Elring Cylinder Head Bolt Set - F8X M2 Comp M3 M4 S55 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2706168

Part#: 11127853937

In Stock

$ 86.99

This product was last offered at the strikethrough price on
05-07-2026

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

Valve Stem Seal Kit - Set Of 16 - N12 N14 N16 N18 1.6L Engine ...

2X Entries Into Our F80 M3 Sweepstakes

T#:591737

Part#: 11340033950

In Stock

$ 42.47

This product was last offered at the strikethrough price on
10-23-2026

$ 30.50 USD

Add to Wish List

Qty

$ 30.50 USD

Add to Wish List

Ensure optimal performance of your Mini's N12, N14, N16, or N18 1.6L engine with this Valve Stem Seal Kit. It includes a set of 16 seals recommended for replacement whenever installing new valves. These seals play a crucial role in sealing the valve under the spring, preventing oil leakage and maintaining proper engine function.

Set of 16 valve stem seals for N12, N14, N16, or N18 1.6L engines
Recommended for replacement when installing new valves
Seals the valve under the spring to prevent oil leakage

Show More Show Less

MINI 1.6 N12/N14/N16/N18 Engine ARP Head Stud Kit

T#:189781

Part#: 201-4304

In Stock

$ 227.99 USD

Add to Wish List

Qty

$ 227.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

Show More Show Less

MINI 1.6 W10/W11 Engine ARP Head Stud Kit

T#:212677

Part#: 201-4301

In Stock

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following MINIs:
2002-2006 R50 MINI MINI Cooper
2002-2006 R53 MINI MINI Cooper S

Show More Show Less

S54 Valve Adjustment Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744038

Part#: 833004937430-KT

In Stock

Sale - Save 12% $ 120.57

This product was last offered at the strikethrough price on
10-28-2026

$ 105.66 USD

Add to Wish List

Qty

Sale - Save 12%

$ 120.57

This product was last offered at the strikethrough price on
10-28-2026

$ 105.66 USD

Add to Wish List

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. Use the proper tools! Includes Wiseco Valve Shim set Schwaben Installation tool #83300493743 BMW recommends S54 valve inspection and adjustment every 30k miles.

Show More Show Less

ARP Head Stud Kit - N63

T#:26238387

Part#: ARP-HSK-N63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.

Show More Show Less

ARP Main Stud Kit for BMW/MINI 1.6 N12/N14/N16/N18 Engine

T#:189787

Part#: 201-5401

In Stock

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

This ARP main stud set for the new MINI F engines eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each main stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the MINI, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

Show More Show Less

BMW Cylinder Head Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:15247118

Part#: 11127838831

Ships in 1 Business Day

$ 60.99

This product was last offered at the strikethrough price on
05-08-2026

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

When replacing a head gasket or performing maintenance that requires the removal of the head, it is advised to replace the cylinder head bolts as they are torque to yield bolts that allow for one time use only.

Show More Show Less

Elring Cylinder Head Bolt Set - E53 E60 E63 E64 E65 E66 E70

2X Entries Into Our F80 M3 Sweepstakes

T#:596415

Part#: 11127583113

Ships in 1 Business Day

$ 73.99

This product was last offered at the strikethrough price on
05-07-2026

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

BMW Cylinder Head Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:15412447

Part#: 11121729246

Ships in 1 Business Day

$ 36.99

This product was last offered at the strikethrough price on
05-08-2026

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The cylinder head bolt is a torque-to-yield bolt, meaning the bolts stretch to ensure proper securing when tightened down. After removal, the bolts cannot return to their pre-stretched state and must be replaced for proper torque. This is a full set and includes 10 cylinder head bolts.

Show More Show Less

ARP Cylinder Head Stud Kit - M30 BMW 3.0L 3.4L

T#:379415

Part#: 201-4602

In Stock at Vendor

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMW Engines:
M30 3.0L 3.4L I6

Show More Show Less

S54 Valve Adjustment Kit - E46 M3, Z3M, Z4M

10X Entries Into Our F80 M3 Sweepstakes

T#:401675

Part#: S54VADJKT1

In Stock

Sale - Save 1% $ 398.29

This product was last offered at the strikethrough price on
07-23-2026

$ 395.53 USD

Add to Wish List

Qty

Sale - Save 1%

$ 398.29

This product was last offered at the strikethrough price on
07-23-2026

$ 395.53 USD

Add to Wish List

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This valve adjustment kit includes every thing needed to to a proper valve adjustment on the S54 engine.

Kit includes

Wiseco valve shims
Elring valve cover gasket set
BMW Valve shim Installation tool
Valve shim feeler gauge set
Castrol TWS Edge Professional Engine Oil - 6 Quarts
Mann Oil Filter Kit
Oil pan drain plug

Please note the the included feeler gauge set allows you to stack feeler blades to get a more precise adjustment

*Click here for valve adjustment instructions*

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

HEAD STUD KIT - BMW S85

T#:20089537

Part#: ARP-HSK-S85

Ships in 6 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW S63 4.4L

T#:51110152

Part#: 201-4703

Ships in 7 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

BMW M10 Engine ARP Head Stud Kit - 2002, E21 320i, E30 318i

T#:189784

Part#: 201-4601

Ships in 8 Business Days

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

ARP Connecting Rod Bolt Kit - M10 1.8L

T#:554123

Part#: 201-6304

Ships on Nov 18, 2026

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMW Engines:
M10 1.8L

Show More Show Less

Cylinder Head Gasket Set MINI N18 1.6L Engine

2X Entries Into Our F80 M3 Sweepstakes

T#:593035

Part#: 456.560

Ships on Nov 20, 2026

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Ensure optimal engine performance for your Mini with this comprehensive Cylinder Head Gasket Set. Perfect for repairing all gaskets and seals during cylinder head replacement or repair, this set includes intake and exhaust gaskets, valve stem seals, valve cover gasket, exhaust gasket, and throttle body gasket. Benefits include:

Comprehensive set for repairing gaskets and seals.
Ensures proper sealing and prevents leaks.
Compatible with Mini models.
Facilitates cylinder head replacement or repair.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

2X Entries Into Our F80 M3 Sweepstakes

T#:596417

Part#: 11127607557

Ships on Nov 19, 2026

$ 83.87

This product was last offered at the strikethrough price on
08-26-2026

$ 77.20 USD

Add to Wish List

Qty

$ 77.20 USD

Add to Wish List

Schrick Solid Lifter Conversion Kit (convert Hydraulic Lifters To Sol...

T#:359938

Part#: 086311700KT

Ships on Feb 22, 2027

$ 833.52 USD

Add to Wish List

Qty

$ 833.52 USD

Add to Wish List

One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.

Show More Show Less

OEM Elring Cylinder Head Bolt Set - BMW 335d M57 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2691343

Part#: 11127798532

Ships in 1 Business Day

$ 97.99

This product was last offered at the strikethrough price on
05-07-2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Includes a full set of replacement Head Bolts. Cylinder head bolts need to be replaced after removal, once a bolt is torqued down you are unable to reuse it.

Cylinder Head Bolt Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:582581

Part#: 11121721938

In Stock

$ 29.99

This product was last offered at the strikethrough price on
07-23-2026

$ 17.55 USD

Add to Wish List

Qty

$ 17.55 USD

Add to Wish List

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

2X Entries Into Our F80 M3 Sweepstakes

T#:596414

Part#: 11127582454

Ships in 1 Business Day

$ 143.90

This product was last offered at the strikethrough price on
08-26-2026

$ 130.62 USD

Add to Wish List

Qty

$ 130.62 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

Pro Series Head Bolts W10 W11 1.6L Engine

T#:26404879

Part#: 206-3601

Ships in 2 Business Days

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

Enhance the performance of your Mini with ARP's Pro series cylinder head bolts. These bolts are cold-forged for maximum molecular integrity and heat-treated to withstand extreme pressure, rated at 190,000 psi. Featuring 12-point heads, each kit includes hardened parallel washers for precise torque readings and even load distribution.

Cold-forged for maximum molecular integrity
Heat-treated to withstand extreme pressure
Rated at 190,000 psi for exceptional strength
12-point heads for easy installation
Includes hardened parallel washers for precise torque readings

Show More Show Less

ARP Head Stud Kit - S63

T#:26238368

Part#: ARP-HSK-S63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

With 5150's ARP head stud kit, you can securely tune up the boost on your BMW S63 engine without worrying about the cylinder heads lifting. Specifically designed for the turbocharged V-8 S63 engines found in high-performance models such as F10 M5, F90 M5, F12 M6, F95 X5M, F96 X6M and F13 M6. 201-4702, 201-4703. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their S63 builds. ARP S63 Head Stud Kit for: M5 F10 2011-2016 M5 F90 2017 M6 F13 2011-2018 X5M F95 2013-2018 X6M F96 2014-2019 ARP2000 Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 90 ft-lbs. Custom Age 625+ Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 110 ft-lbs.

Show More Show Less

ARP Head Stud Kit, BMW S14

T#:28537451

Part#: ARP-HSK-S14

Ships in 3 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This ARP head stud Kit is designed for the BMW S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Installing ARP head studs can provide several benefits, including increased clamping force, improved head gasket sealing, and greater overall engine strength. This is especially important in high-performance and racing applications where the engine is subjected to increased stress and higher temperatures. Before installing ARP head studs, it is important to properly clean and prepare the engine block and cylinder head mating surfaces. It is also recommended to use ARP Ultra-Torque Fastener Assembly Lubricant during installation to ensure proper torque and clamping force. Instructions: 1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase if necessary with ARP Thread Chaser. 2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension. 3. If the cylinder head studs protrude into a water jacket, lubricate the block threads of the studs with ARP THREAD SEALER. 4. Screw studs into the block “HAND TIGHT ONLY”. 5. Install the cylinder head(s) and check for binding or misalignment. 6. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight. ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when motor oil or other low quality lubricants are used.

Show More Show Less

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

In Stock at Vendor

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

ARP Head Stud Kit B48

T#:48367046

Part#: 201-4704

In Stock at Vendor

$ 263.99 USD

Add to Wish List

Qty

$ 263.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - ARP2000 - BMW S58 3.0L

T#:51110148

Part#: 201-4705

In Stock at Vendor

20% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

Qty

20% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

Elring Cylinder Head Bolt Set - BMW N47 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:45517828

Part#: 233.370

Ships on Dec 3, 2026

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

BMW cylinder head bolts are almost always stretch bolts and should never be reused after removal. Reusing old bolts can lead to a weak seal between the cylinder head and engine block, allowing the head to lift and cause potentially catastrophic damage. Replace your old cylinder head bolts with these brand new Elring bolts to ensure your head is properly secured to prevent damage and keep your engine healthy. Replaces BMW # 11128513128

Show More Show Less

Project Cars

SELECT YOUR BMW

Cylinder Head

Sub-Categories

Cylinder Head Bolt Set for Engine Maintenance

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results