BMW E36 (1992-1998) M3

Like what we do? We hope so. Purchase a Turner Motorsport T-Shirt today and add the Turner colors to your regular t-shirt rotation.

These shirts are premium, New-Era tees - we wouldn't want you to be uncomfortable while sporting the Turner logo.

Available in Black, Grey, and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

• Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
• Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
• Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

• Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
• Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
• Bearing inserts: CNC machined 303 stainless steel.
• Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Keep warm in Turner style with a Turner Motorsport sweatshirt. It gets cold here in New England - we know the value of a good hoodie when the weather starts to turn.

Available in Black and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

If you've ever bled the clutch hydraulic system on your BMW, you know how frustrating it can be. Designed with both DIY enthusiasts and professional technicians in mind, our clever tool simplifies one of the most notoriously annoying steps in clutch service.

Crafted from high-quality aluminum and finished in a durable black anodized coating, our clutch slave cylinder bleeder tool is built to last. Its function is simple: the adjustable piston rod applies controlled pressure directly to the clutch slave cylinder’s piston, compressing it and reducing its internal volume. By minimizing the amount of air trapped inside the cylinder, bleeding becomes faster, cleaner, and far more effective—no more endless pedal pumping or inconsistent clutch feel. The result is firm, consistent clutch pedal engagement and a smoother overall driving experience, all achieved with less time and effort underneath the car.

FEATURES & BENEFITS

Simplifies bleeding the BMW clutch hydraulic system by reducing trapped air in the slave cylinder Eliminates excessive pedal pumping and inconsistent clutch feel Helps achieve firm, consistent clutch pedal engagement Crafted from high-quality aluminum for strength and longevity Durable black anodized finish resists wear and corrosion Designed for both DIY enthusiasts and professional technicians PRODUCT DEVELOPMENT

Our Clutch Slave Cylinder Bleeder Tool was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

This kit includes everything to fit an OBDI M50 manifold to an OBDII M52 or S52 engine (1996-1999). It takes the guesswork out of adding the M50 manifold to your engine. The kit includes a CNC machined adapter, with all hardware and gaskets, that allows the freer flowing M50 manifold to be installed while maintaining full function of M52/S52 components including factory PCV cyclone / oil seperator valve. No vacuum leaks, no check engine lights. And the entire kit is completely reversible. Turner Motorsport has dealt with the problems from other kits and this adapter block is by far the best solution.

The base price of this kit does not include the M50 manifold. You can pick up a used manifold from a 1992-1995 E36 325i or a 1995 M3 3.0 liter. You can find them in local junk or scrap yards, online at Craigslist or eBay, or from various forums. If you would rather not deal with the potential pitfalls of a used part, we can offer a new Original BMW manifold to go with the adapter. While expensive, the new manifold is guaranteed to be in perfect condition with no cracks, warping, or foreign objects hidden inside. A new factory BMW manifold can be added to your order by selecting the option above.

With the introduction of the 1996 model year came the OBDII emissions compliant engine. Among the many changes the OBDII engines received was a more restrictive air intake manifold. Where the older M50/S50 engines continued to make power up in the higher RPMs, the newer M52/S52 ran out of breath, limiting high-end horsepower, but boosting low-end torque. Converting the OBDII cars to the 1995 and earlier OBDI manifold is a popular modification to remove this high-rpm restriction.

To best maximize the horsepower gains of this modification, you should be using the M50 manifold with bigger cams, HFM, injectors, and software. We have found this combination of upgrades and software to yield the best results for producing top-end power. Note: using the M50 manifold shifts the power band higher in the RPM range. This is GREAT for track cars but not well-suited for street cars where the OBDII manifold works best to produce torque at lower RPM. Presently, we do not have software tuned for only the M50 manifold without cams or the HFM upgrade. Check our website again for future product releases. We currently offer custom mapped Shark Injectors for these packages:
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/stock OBDII manifold
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/M50 manifold

Optional fuel rail cover. The standard M52/S52 fuel rail cover is too tall for the M50 manifold and does not have the proper brackets for securing it in place over the fuel rail. We can correctly modify the stock M52 fuel rail cover for you to complete the factory appearance.

Download PDF Installation Instructions

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless Steel brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface. 

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals). Please note on E36 convertible models (1994-1999) the optional footrest requires modification. 
 

These aluminum racing pedals fit the following left-hand drive BMWs:
2014+ F22 BMW 228i M235i 
1984-1991 E30 3 Series - 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ix ** with MANUAL transmission
1992-1998 E36 3 Series - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is ** with MANUAL transmission
1996-1999 E36 M3 including 3.2 liter M3 ** with MANUAL transmission
1999-2005 E46 3 Series - 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, 330xi ** with MANUAL trans
2001-2006 E46 M3 coupe & convertible (SMG uses only one brake/clutch pedal)
2008-2013 E82/E88 1 Series - 135i coupe & 135i convertible with MANUAL or DCT
2006-2011 E90/E92 3 Series - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi ** with MANUAL transmission
2008-2013 E90/E92/E93 M3 including M3 sedan, M3 coupe & E93 M3 convertible (DCT uses only one brake/clutch pedal)
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 (DCT uses only one brake/clutch pedal)
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2015+ F82 BMW M4 (DCT uses only one brake/clutch pedal)
1989-1995 E34 5 Series - 525i, 530i, 535i, 540i ** with MANUL transmission
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 (SMG uses only one brake/clutch pedal)
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5 (DCT uses only one brake/clutch pedal)
2004-2010 E63 BMW 645ci 650i M6 (SMG uses only one brake/clutch pedal)
2012+ F12 BMW 640i 650i 650i xDrive M6 (DCT uses only one brake/clutch pedal)
2013+ F06 BMW 640i Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe (DCT uses only one brake/clutch pedal)
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Due to weak plastic construction, the factory plastic crankcase ventilation breather hose is known to fail. After years of exposure to piping-hot engine bay temperatures and chemical-laden oil vapors, the corrugated plastic tubing can crack, crumble, or fail altogether.

We set out to bulletproof your M52/S52 CCV system with a durable silicone breather hose, designed to provide a comprehensive upgrade and permanent replacement for the factory plastic hose. By replacing the flimsy, heat-hardened OEM plastic hose with a four-ply fluorosilicone hose, you'll experience peace of mind knowing your M52 or S52 is free from the inevitable return of oil leaks, vacuum leaks, and drivability concerns that would have been.

This breather hose is found at the front of the engine, and is used to connect the cyclone separator to the valve cover. It replaces OEM part number 11151703775.

Features:

Silicone construction ensures a durable replacement that is sure to outlast OE plastic Designed as a direct replacement for the factory breather hose - not too short like many aftermarket alternatives, and does not require cutting to fit Works seamlessly with the OEM OBDII valve cover and cyclone separator, as well as the Turner Motorsport Billet Aluminum Valve Cover (T#26238386) Design:

Three-ply wire-reinforced fluorosilicone hose is designed to resist degradation due to exposure to oil vapors O-rings are pre-installed in OE Norma connectors for a lasting seal Includes pre-installed 430 stainless steel hose clamps for durability and corrosion-resistance Product Development:

Our Silicone CCV Hose Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3.

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

If you have an E36 M3 front bumper or aftermarket front bumper our Turner LTW inspired front lip is a must have! In North America we all feel the pain of being neglected by the foreign car manufacturers. For once we got the exclusive model, the E36 M3 LTW. The lightweight version of the M3 came with a tuned up S50, big spoiler and a bare bones package for the ultimate driving experience. We wanted to take some inspiration for the LTW and bring a easy add-on to give everyone with an E36 M3 front bumper the opportunity to sport the LTW Vibe.

Designed in-house using 3D scan modeling and CAD, our front lip is a cost-effective, yet highly appealing option with a lot to offer! Made specifically for the M3 front bumper, this ABS front lip is durable, lightweight, and easy to install. This LTW Inspired Front Lip is a perfect alternative to expensive carbon fiber front lips that are prone to failure, and a more rugged option than typical cheaper plastic lips which provide few benefits and offer questionable fitment at best.

Utilizing UV stabilized ABS in a two-piece bonded design, this lip has shown to provide the best possible combination of cost-to-performance and retains the clean matte finish of the original E36 trim. If matte black isn't your thing, this lip can easily be prepped and painted to whatever color you desire.