BMW Brakes & Brake Parts for BMW E46 M3 S54 (1999-2005)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting fittings, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a new proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Click Here for E30 M3 Installation Instructions.
Click Here for E36 Installation Instructions.

We have Steering Rack Stops to fit the following BMWs:
1987-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Rear Brake Pads
• Centric Rear Rotors
• New Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2001-2006 E46 BMW M3 (Non-CSL/Competition Package)

This brake package for the 2001-2006 BMW E46 M3 ZCP (Competition Package) comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Genuine BMW replacements
Front and rear brake pads - OEM organic, street performance, mixed track/street, or full race
Front and rear pad wear sensors
Brake fluid - DOT4 street or DOT4 racing fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

This kit is a direct replacement for the standard floating and cross-drilled 345mm rotors in the ZCP Competition Package. This is brake overhaul for the ZCP and will not work as an upgrade for non-ZCP unless the ZCP front caliper brackets are used. We offer the full E46 M3 ZCP brake upgrade on the website here (click).
 

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

Applications:
2004-2006 BMW E46 M3 ZCP (Competition Package)

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS 2-Piece Semi-Floating Cross-Drilled & Slotted Rotors (Front) ECS EP24 "Enthusiast Performance" Brake Pads URO Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi M3 
1999-2003 E39 BMW M5 
1995-2001 E38 BMW 740i 740il 
1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 
2000-2003 E52 BMW Z8 Roadster

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

• RST1 -  Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
• RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
• RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
• RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
• RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe