BMW Brakes & Brake Parts for BMW E46 M3 S54 (1999-2005)

Upgrade your BMW's braking performance with the Power Stop Z26 Street Warrior Brake Kit.

This kit provides fast, easy, and affordable braking solutions for improved braking and brake cooling.

• Includes drilled and slotted rotors for enhanced cooling
• Features Extreme Carbon-Fiber Ceramic brake pads for less dust and severe-duty stopping power
• Comes with stainless steel hardware and new guide-pin bushings for durability
• High-temperature brake lubricant ensures smooth operation
• Upgraded rotors with precision drilling and rounded slots for gas and debris removal
• Silver Zinc Dichromate plating prevents rust and corrosion for long-lasting performance

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi M3 
1999-2003 E39 BMW M5 
1995-2001 E38 BMW 740i 740il 
1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 
2000-2003 E52 BMW Z8 Roadster

These pads were originally equipped on the Euro E46 M3 models and the US M3 ZCP, as well as Euro-spec M models from the 1990s. Owners of the E46 M3 will know that the stock pads are already quite 'aggressive' from the factory with a lot of initial bite. The initial bite was built into the pad to stop criticism of BMW's lack of 'performance' brakes. Instead of building the M models with exotic - and expensive - multi-piston calipers, BMW engineers turned up the braking power in their pads. These pads go a step further as the pads that originally came on the Euro E46 M3 and all E46 M3 ZCPs. For the street, these are excellent brake pads with excellent feel and performance. The only downside is the dust that comes from an organic pad. The problem with many aftermarket and OEM pads is that they do not match the same level of initial bite as the stock OE BMW pads. This can make the brakes feel 'weak' and 'numb' even though the pads are working properly. If you want to maintain your braking feel, these are the best to use.

Although these pads were originally designed for M cars, they fit other models as well, making them a great first-step upgrade for better braking.

Price is for one set of pads - enough to replace the pads on both front calipers.

If you are looking for front brake rotors, 2282445446

These front pads fit the following BMWs:
1988-1994 E32 BMW 735i 735il 740i 740il 750il (more aggressive fitment)
1989-1995 E34 BMW 525i 530i 535i 540i M5 (more aggressive fitment)
1994-1998 E36 BMW M3 (more aggressive fitment than US-spec)
1998-2002 Z3 BMW M Roadster M Coupe (more aggressive fitment)
1999-2005 E46 BMW 330i 330ci 330xi M3 (more aggressive fitment for 330)
2003-2008 E85 E86 BMW Z4 3.0si Z4 M Roadster M Coupe (more aggressive fitment for 3.0si)

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.