ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production) ...

For vehicles with production from 02/2003

T#:2206

Part#: 201-6102

In Stock

$ 119.99

This product was last offered at the strikethrough price on
10-01-2026

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the Euro S50 and S54. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

This set replaces the factory BMW Euro S50B30 and B32 rod bolts with part number 11-24-1-317-184 (11241317184) and 11-24-1-405-890 (11241405890). It's also used for S54 engines with stock M10 sized rod bolts, which were used from February 2003 production and later. It was also used in earlier engines that had connecting rods replaced. For these 2001-2003 models there is no easy way to check if the rods were replaced, except by checking the rod bolt diameter. If your car has the earlier M11 sized bolt, use ARP kit #201-6103 . Before opening the ARP kit, we recommend that you check your existing rod bolt size as BMW was not consistent with their applications. ARP bolts are not returnable if the package has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1993-1999 E36 BMW Euro M3
2001-2/2003 E46 M3 coupe / convertible*
2/2003-2006 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe*
2006-2008 MZ4 M Roadster & M Coupe
* - these engines could have either M10 or M11 sized bolts. If the rods and rod bearings were replaced under recall by BMW it should have the newer M10 bolts and this is the correct ARP set to order.

Show More Show Less

ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B...

T#:3315

Part#: 201-6303

In Stock

$ 212.99

This product was last offered at the strikethrough price on
10-12-2026

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 47mm length factory BMW rod bolts with part number 11-24-7-589-671 (11247589671) Check applications before ordering! Opened ARP bolt kits are not
returnable.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1999-2005 E46 BMW 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 3.0i
2003-2005 Z4 BMW Z4 3.0i

Show More Show Less

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

T#:3606

Part#: 201-4302

In Stock

$ 240.99 USD

Add to Wish List

Qty

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

ARP Connecting Rod Bolt Kit - Early S54 - E46 M3, MZ3 (M11x47mm Size)...

For vehicles with production up to 02/2003

T#:2211

Part#: 201-6103

In Stock

$ 215.99 USD

Add to Wish List

Qty

$ 215.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

These bolts are M11 size to replace the stock M11 BMW bolt part number 11-24-7-834-310 (11247834310). The M11 bolt size was used in S54 engines up to 2/2003 production. However, most S54 engines up to that point had their rod bearings replaced under a factory recall and some may have had new connecting rods installed at the same time (or even a new engine altogether). The new bolts installed in these earlier engines are M10 size. Unfortunately, there is no way of knowing which rod or bolt is currently in your car (unless your car came with service records detailing when and what was replaced). The only sure way to know is to check the bolts currently installed in your engine. If yours was updated to the M10 sized bolt, use ARP kit #201-6102 . ARP bolts are not returnable if the pacakge has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
2001-2/2003 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe

Show More Show Less

ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)

T#:3631

Part#: 201-4303

In Stock at Vendor

$ 247.99 USD

Add to Wish List

Qty

$ 247.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe

Show More Show Less

Genuine BMW Exhaust Valve - S54

T#:34525

Part#: 11347830888

Ships in 1-2 days

16% off MSRP $ 88.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.80 USD

Add to Wish List

Qty

16% off MSRP

$ 88.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.80 USD

Add to Wish List

Genuine BMW Exhaust Valve - 30,5/5,95mm
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less

S5X/M5X/M44/M20/M10- WPC Treated Rod Bearing Set - (Standard/Red Shel...

10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!

T#:395066

Part#: 11241284849WPC

In Stock

Sale - Save 25% $ 188.99

This product was last offered at the strikethrough price on
11-07-2026

$ 141.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 188.99

This product was last offered at the strikethrough price on
11-07-2026

$ 141.74 USD

Add to Wish List

These WPC-treated bearings are the best we have seen! WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are original equipment KS bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1982-1988 E28 BMW 528e
1989-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Genuine BMW Cylinder Head Check Valve

T#:19361

Part#: 11121735180

Ships in 1-2 days

4% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

4% off MSRP

$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Genuine BMW Crankshaft Socket Tool - S50 3.0L, S54 3.2L, B48/46 B58 ...

T#:170499

Part#: 83300491056

Ships in 1-2 days

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Working on your S50/S54 or B series timing system? Then you need this adapter that will allow you to turn the engine over at the crankshaft with a socket wrench. BMW tool number: 11 5 100

BE Bearings Connecting Rod Bearing Upgrade Set - SP1534F - BMW S54 ...

T#:403644

Part#: SP1534HKSTDS54

Ships on Dec 10, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

NOTE: These bearings are now sold as SP1534F which features a new and improved silver oxide coating that is stronger and more durable! Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil. These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating. Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended). Designed with extra clearance to "fix" the BMW rod bearing design flaw. Designed for use with factory 10W60 weight oils. Tri-Armor coated for low conditions during cold start Ideal for start-stop vehicles Applicable for BMW engines S54 Standard size Sold as complete set (6-cylinders) Fits the following BMWs: 2002-2006 E46 BMW M3 S54 2002-2003 Z3 BMW M Coupe, M Roadster S54 2006-2008 Z4 BMW M Coupe, M Roadster S54

Show More Show Less

Genuine BMW Oil Pump - E46 M3, Z3m (s54), Z4m

T#:19066

Part#: 11417838123

Ships in 1-2 days

20% off MSRP $ 1,081.09

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 859.56 USD

Add to Wish List

Qty

20% off MSRP

$ 1,081.09

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 859.56 USD

Add to Wish List

This Genuine BMW oil pump is the most up to date version direct from BMW. If replacing or upgrading bearings, we recommend replacing the oil pump especially if the engine has over 100,000 miles.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe - S54
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW S54 VAC Performance Coated Rod Bearing Kit

T#:7164819

Part#: VAC-HPRBS-S54

Ships on Nov 30, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

BMW S54 VAC Performance Coated Rod Bearing Kit is highly regarded by BMW engine builders worldwide for its superior quality and performance. Ideal for both forced induction and naturally aspirated builds, these coated bearings are designed to be friction-resistant, reducing the risk of thermal breakdowns due to inadequate lubrication. This feature significantly decreases the chances of premature engine failure in street cars and minimizes the risk of spun bearings during high-stress track conditions.

The VAC Performance Coated Rod Bearing Kit is proven to help maintain engine reliability, even in situations with reduced oil pressure.

Enhanced Durability: Coated bearings are friction-resistant, reducing the risk of thermal breakdown.
Increased Reliability: Helps prevent premature engine failure and spun bearings under stress.
Versatile Performance: Suitable for both forced induction and naturally aspirated engine builds.
Proven Track Record: Tested by customers to ensure reliable performance even with oil pressure loss.

VAC Tech Notes:

Ensure proper tolerance and size checks before installation.
Professional installation is recommended due to specialized tools required.
Returns are not available on any engine bearings.

Show More Show Less

S54/S5X/M5X/M20/M44 WPC Treated BMW Engine Crankshaft Main Bearing Se...

10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!

T#:585720

Part#: 11211706847WPCKT

In Stock

Sale - Save 5% $ 250.99

This product was last offered at the strikethrough price on
11-07-2026

$ 238.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 250.99

This product was last offered at the strikethrough price on
11-07-2026

$ 238.44 USD

Add to Wish List

What's better than using new crank bearings in your next engine build? WPC-treated bearings! What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or crank service!

Show More Show Less

Genuine BMW Splined Shaft

T#:34614

Part#: 11361715027

Ships in 1-2 days

2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

2% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Splined Shaft -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

Achilles Motorsports Performance Coated Rod Bearing Set - BMW M50 M52...

T#:1438265

Part#: 11-AM-RCRB-M50

Ships in 3 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Achilles Motorsports uses an extremely hi-tech Dry Film Lubricating process that will keep friction to a minimum allowing your engine to rev faster without worry while keeping oil temperature lower. Perfect for high-performance street, sprint, or endurance racing engines, this specialized coating protects vital engine bearings on dry engine starts and during extreme temperatures and high RPM operation. This specialized coating is the same process that is the choice of professional engine builders around the world, used on all NASCAR, ALMS, and Grand-Am engines. Achilles' bearings provide increased insurance against mechanical thermal breakdown compared to the OEM type bearing, showing much less wear during routine inspections. Note For high-performance and racing engines, we strongly recommend upgrading the OEM type connecting rod bolts to an ARP Connecting Rod Bolt Set to keep your bearing and caps tight even under the most extreme conditions, eliminating potential walk and bearing problems. As with all racing and performance bearings, professional installation is required. Please check all clearances as per the manufactures specifications.

Show More Show Less

Timing Chain Tensioner Piston - E36 M3, E46 M3, MZ3, MZ4 with S52 or ...

T#:3162

Part#: 11317838675

Ships in 1-2 days

3% off MSRP $ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Qty

3% off MSRP

$ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

This timing chain tensioner piston fits BMW S52 and S54 engines on the E36 M3, E46 M3, MZ3, MZ4. This is the tensioner with the flat face rather than the keyed face that grips the tensioner rail.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1999 E36 BMW M3 M3 Convertible
2001-2006 E46 BMW M3 M3 Convertible
1998-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe

This one piece piston is an upgrade for the following BMWs with the 2 piece piston.
1994-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
2004-2006 E83 BMW X3 2.5i X3 3.0i with M54 engine
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i with M54 engine

Show More Show Less

Genuine BMW Camshaft Bearing Bridge - Exhaust

T#:12881

Part#: 11121436224

In Stock

6% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Qty

6% off MSRP

$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Genuine BMW Bearing Ledge Exhaust
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

MAHLE PowerPak Piston Kit 87.50mm - S54 - 3.2L

T#:2929003

Part#: 930000045

Back Ordered

$ 1,088.99

This product was last offered at the strikethrough price on
11-04-2026

$ 1,075.99 USD

Add to Wish List

Qty

$ 1,075.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Genuine BMW Camshaft Bearing Bridge - Intake

T#:21667

Part#: 11121740428

Ships in 1-2 days

6% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Qty

6% off MSRP

$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

E46 M3 Rocker Arm / Cam Follower (Genuine BMW)

T#:3589

Part#: 11337833259

Ships in 1-2 days

$ 114.32 USD

Add to Wish List

Qty

$ 114.32 USD

Add to Wish List

New rocker arms (cam followers) are required during any new camshaft installation on the S54 engine. Otherwise the original rocker arm will wear the new camshaft lobe unevenly. These are the Original BMW S54 rocker arms and used on the original E46 M3 CSL cams as well. While these are fine for CSL cam upgrades or the Schrick 280/272 cams, the Schrick DLC rocker arms are better all around, especially when used with the more aggressive 288/280 or higher cams.

Priced per rocker.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2003-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW M54 3.0l MAHLE Forged Piston Kit 84.127mm

T#:2928980

Part#: 197843112

In Stock at Vendor

$ 1,004.99 USD

Add to Wish List

Qty

$ 1,004.99 USD

Add to Wish List

Forged 4032. Get the performance and reliability your M54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Genuine BMW Piston Ring Set (84.00 mm, Standard) - E39 E46 E60 E83 Z3...

T#:33487

Part#: 11257511697

Ships in 1-2 days

2% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Qty

2% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E39,E46,E83 X3,E85

Fits BMW Engines including:
M54,M56

JE Pistons Forged Piston Set Of 6 - 87.5mm Bore - 11.5:1 CR - E46 M3 ...

T#:599660

Part#: 297118

In Stock

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

Features: Crown requires no deburring or preparation 2618 T6 high tensile forged aluminum New asymetrical FSR forging! State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform In this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy FSR pistons include offset pins for quiet operation Pistons feature new Smooth Finished Crown process for excellent flame travel 1.0 x 1.2 x 2.8mm ring widths .827 x 2.250 straight wall carbon steel wrist pin provided Pin fitting, rings and wire locks included Specifications: Bore (in): 3.445 Bore (mm): 87.50 Top Compression Ring Thickness: 0.0400 Second Compression Ring Thickness: 0.0480 Oil Ring Thickness: 0.111 Forging Type: FSR Volume (cc): -13.80 Series: JE Pistons Piston Head Type: Inv Dome/Dish Pin Diameter (IN): 0.827 Compression Height: 1.271 Make: BMW Wrist Pin Style - floating or press fit: Floating Wall Type: CHAMFERED Wall Thickness (IN): 0.150 Ringset Part Number: JG1001-3445 Ring Brand: ProSeal Ringset Included: Yes Retainer Thickness: 0.063 Retainer Lock Style: Wire Lock Retainer Lock Part Number: 827-063-MW Retainer Diameter (IN): 0.827 Replacement Single Piston: 297118S Replaced By: 289132 Piston Pin Inside Diameter: 0.527 Piston Pin Material: 5115 LOW CARBON STEEL, CASE HARDENED Piston Material: 2618 Piston Pin Length (IN): 2.250 Piston Avg Wt: 332 Pin Offset: Yes Pin Brand: JE Pistons Pin Part Number: 827-2250-15-51C Pin Included: Yes Pin Diameter (mm): 21.00 Oil Rail Support Included: No Deck Clearance: -0.008

Show More Show Less

MAHLE Forged Piston Set 87mm - S54 - 3.2L

T#:2958764

Part#: 930286125

Back Ordered

$ 1,088.99

This product was last offered at the strikethrough price on
11-04-2026

$ 1,075.99 USD

Add to Wish List

Qty

$ 1,075.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

BMW M50 M52 S50 S52 Shrick Camshaft Set 276 intake / 270 exhaust ...

For single-VANOS M52 2.8L only

T#:4731086

Part#: SCH-CSS-S52-276/

Ships in 2 Business Days

$ 2,640.99

This product was last offered at the strikethrough price on
09-10-2026

$ 1,779.99 USD

Add to Wish List

Qty

$ 1,779.99 USD

Add to Wish List

Elevate your BMW's engine performance with Schrick's premium camshafts, crafted with over 40 years of dedication to excellence. Catering to both street and track enthusiasts, Schrick ensures top-quality materials for strength and accuracy. This renowned brand has formed a lasting bond with BMW enthusiasts, providing advanced camshaft options that have stood the test of time.

Premium Schrick camshafts for BMW
Over 40 years of dedicated engine performance expertise
Ideal for both street and track applications
Top-quality materials for strength and accuracy
Trusted by BMW enthusiasts worldwide
Advanced engine testing and manufacturing technology

Show More Show Less

Genuine BMW Cam Gear - Intake

T#:34621

Part#: 11361744263

Ships in 1-2 days

2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

2% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Sprocket -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

Genuine BMW Rocker Arm Shaft - Exhaust - S54 3.2L

T#:34261

Part#: 11337838124

Ships in 10 Business Days

$ 168.32 USD

Add to Wish List

Qty

$ 168.32 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft, Outlet
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less

Genuine BMW Air shut-off valve - E46 M3

T#:36622

Part#: 11617833212

Ships in 1-2 days

2% off MSRP $ 544.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 532.99 USD

Add to Wish List

Qty

2% off MSRP

$ 544.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 532.99 USD

Add to Wish List

Genuine BMW Air Shut-Off Valve
This item fits the following BMW Chassis:
E46 M3,E46

Fits BMW Engines including:
S54

S54 Valve Shim Set - E46 M3, Z3M, Z4M

T#:5673

Part#: 11340031525

Ships in 1-2 days

2% off MSRP $ 1,054.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,032.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,054.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,032.99 USD

Add to Wish List

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This genuine BMW valve shim kit includes a 23 different size shims ranging from 1.72mm to 2.6mm. There are 6 of each shim.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

If you are adjusting the valves you will also need valve cover gaskets and we recommend the shim tool.

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

Piston Ring Repair Kit - E39, E46, E60, E83, Z3, Z4

T#:33488

Part#: 11257511698

Ships in 1-2 days

2% off MSRP $ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 125.99 USD

Add to Wish List

Qty

2% off MSRP

$ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 125.99 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (00)
This item fits the following BMW Chassis:
E39,E46,E83 X3,E85

Fits BMW Engines including:
M54,M56

Genuine BMW Oil Pump - 11417501568 - E39,E46,E53,E83,E85

T#:19070

Part#: 11417501568

Ships in 1-2 days

5% off MSRP $ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 758.99 USD

Add to Wish List

Qty

5% off MSRP

$ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 758.99 USD

Add to Wish List

As the M52tu,M54,M56 engines start to rack up the miles it is a good idea to replace the oil pump with this Genuine BMW part. We also recommend replacing the oil pump nut as it has a tendency to back off over time especially during track use. While you are in there we also recommend replacing the oil pump nut with this drilled oil pump nut as the stock nut has a tendency to back off the shaft especially on track driven cars.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1/2000-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330x
1/2000-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1/200-2002 Z3 BMW Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Camshaft Exhaust - E46, Z3, Z4

T#:34114

Part#: 11317833225

Special Order: No Guaranteed ETA

6% off MSRP $ 1,047.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 987.00 USD

Add to Wish List

Qty

6% off MSRP

$ 1,047.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 987.00 USD

Add to Wish List

Genuine BMW Camshaft Exhaust
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

MAHLE PowerPak Piston Kit 87.50mm with Thermal Barrier Coating (TBC) ...

T#:2929008

Part#: 930000145T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 87.50mm with Thermal Barrier Coating (TBC) ...

T#:2929004

Part#: 930000045T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Set 87mm with Thermal Barrier Coating (TBC) - S...

T#:2958763

Part#: 930286125T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Set 87.25mm - S54 - 3.2L

T#:2929006

Part#: 930000135

Ships in 2 Business Days

$ 1,088.99

This product was last offered at the strikethrough price on
11-04-2026

$ 1,075.99 USD

Add to Wish List

Qty

$ 1,075.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 87.25mm with Thermal Barrier Coating (TBC) ...

T#:2958765

Part#: 930286135T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Achieve enhanced performance and reliability for your BMW S54 engine with the MAHLE Motorsports PowerPak Piston Kit. This kit replaces the factory cast aluminum pistons with robust forged pistons, offering superior strength and durability. MAHLE forged pistons are engineered to withstand extreme heat, detonation, and pressure, making them ideal for high-performance engines. MAHLE Motorsport's PowerPak and PowerPak+ piston kits ensure exceptional reliability and performance, elevating your BMW engine build to new heights. The range includes BMW piston sets in 2618, 4032, and M142 alloys, catering to N54, S54, and Mini Cooper models. These piston sets come complete with pins, clips, and rings, designed for both motorsport applications and those seeking to enhance daily driver performance. Notably, the latest addition is the B58 3.0L, featured in the 2020 Toyota Supra. Drawing on over 95 years of performance expertise and employing MAHLE-manufactured machinery for unique features, MAHLE Motorsport ensures uncompromising quality.

Show More Show Less

MAHLE PowerPak Piston Set 87.25mm with Thermal Barrier Coating (TBC) ...

T#:2929005

Part#: 930000135T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 87.5mm - S54 - 3.2L

T#:2958767

Part#: 930286145

Ships on Nov 30, 2026

$ 1,088.99

This product was last offered at the strikethrough price on
11-04-2026

$ 1,075.99 USD

Add to Wish List

Qty

$ 1,075.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Mahle Piston - E39, E46, E60, E83, Z3, Z4

T#:33491

Part#: 11257512526

Ships in 1-2 days

2% off MSRP $ 388.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 380.99 USD

Add to Wish List

Qty

2% off MSRP

$ 388.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 380.99 USD

Add to Wish List

Genuine BMW Mahle Piston - (0)
This item fits the following BMW Chassis:
E39,E46,E83 X3,E85

Fits BMW Engines including:
M54

Genuine BMW M52 Inlet Camshaft - 11311438079 - E39,E46,E83,E85 ...

T#:33868

Part#: 11311438079

Ships in 1-2 days

6% off MSRP $ 767.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

Qty

6% off MSRP

$ 767.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

Genuine BMW M52 Inlet Camshaft

Elevate your BMW's performance with the Genuine BMW M52 Inlet Camshaft. Crafted to exact specifications, this camshaft ensures optimal engine performance and reliability. Upgrade your BMW's engine with this genuine BMW part for a smoother and more powerful driving experience.

Genuine BMW part guarantees perfect compatibility
Crafted to exact specifications for optimal performance
Enhances engine power and torque
Genuine BMW Inlet Camshaft -
This item fits the following BMW Chassis:
E39,E46,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

Show More Show Less

Genuine BMW Splined Sleeve

T#:34607

Part#: 11361438306

Ships in 1-2 days

3% off MSRP $ 100.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.99 USD

Add to Wish List

Qty

3% off MSRP

$ 100.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.99 USD

Add to Wish List

Genuine BMW Tooth Sleeve -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

MAHLE PowerPak Piston Kit 87.25mm with Thermal Barrier Coating (TBC) ...

T#:2958768

Part#: 930286145T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

JE Pistons Set Of 6 Pistons

T#:5122283

Part#: 297119

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons are specifically engineered for extreme applications up to, and including, professional competition. In this environment, higher compression ratios, extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston. *Application Specific Forgings for an Optimized, Uniform Crown Thickness *Contact Reduction Groove to Minimize Frictional Drag *Accumulator Groove for Increased Top Ring Stability and Sealing *CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength *Honed Pin Bores, Double Pressure Fed Pin Oilers and Wire Locks Included *JE ProSeal Piston Rings are included with your JE Pistons

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E46 (1999-2005)

Sub-Categories

Genuine BMW M52 Inlet Camshaft

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results