Turner Motorsport BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should.

These E46 fixed camber plates are designed from knowledge gained from our highly successful racing campaigns with the E46 in the Speed World Challenge series. These plates are offset for the best camber and caster combination for racing purposes when using the stock-diameter sized springs. Camber increases to between -2.5° to -3.0°, depending on each individual car. While ride height is increased by 1/4", the benefit of these plates far outweighs the minor ride height increase. The rate of camber change is virtually unaffected throughout the range of suspension travel, reducing the need for other geometry correction. Material has also been added to increase surface contact area therefore reducing the strut tower deformation and increasing the strength of the strut towers. Fixed mount camber plates are legal in many racing and autocross classes. These are the perfect camber solution when adjustable plates are not allowed in your class. These are a simple bolt on part for all E46 except the xi and M3 models.

Instructions for Turner E46 Front Fixed Camber Plates

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - not for xi models 
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

• GERMAN-MADE
• DIRECT REPLACEMENT
• LIFETIME WARRANTY!
• BUY A PAIR FOR THE PRICE OF FACTORY SINGLE!

The rear springs on the 2001-2006 E46 M3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Replaces Coupe models only.

This item fits the following BMWs:
2001-2006 E46 BMW M3 Coupe

This is a NEW replacement polyurethane bushing used in our E46 M3 Front Street Camber Plates. This is a custom-manufactured part for Turner Motorsport, made with our own specifications. Replacement is straight-forward but does require the camber plates to be removed from the car. Price is for each bushing.

This item fits the following BMWs:
2001-2006 E46 BMW M3 with Front Turner Street Camber Plate