BMW Drivetrain Parts for BMW 3 Series E46 (1999-2005)

Opt for the specified synthetic fluid recommended by BMW for the hydraulic unit in your SMG transmission. As outlined in the BMW technical article from May 2008, this fluid meets the required specifications for optimal performance.

E46 M3, Z4 M Front Wheel Hub Assembly with Bearing. This is an OEM Wheel Bearing Hub Assembly. Available from FAG or GSP. Both meet all of the OE specifications for fitment and life.

FAG is an OE supplier to BMW as well as several other German marques. (SKF does not have a front bearing assembly for the E46 M3).

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

This is an OEM LuK stock twin mass flywheel. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21217512474, 21217509078, and 21207508456.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version. 

• FX100 (Stage I)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed organic friction material

Lightweight flywheel and upgraded clutch kit for improved throttle response, acceleration, and clutch feel - the perfect setup for daily-driven vehicles with up to 400 Ft/lbs of torque.

This performance clutch and flywheel kit utilizes an upgraded ECS E34 M5 clutch kit with their in-house engineered flywheel to fit all M5x and S5x motors with a 5-speed transmission. By eliminating the dual-mass flywheel and replacing it with a single-mass you are able to eliminate the slack and extra weight of the flywheel for a quicker throttle response and acceleration. Their upgraded clutch kit utilizes all the best features of the original M5 clutch with an upgraded pressure plate and clutch disc, with the new clutch you have a better, more engaged clutch pedal feel, engagement, and longevity.

Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch and flywheel kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.

Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.

On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.

The E34 M5 clutch and flywheel kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.

Kit Contents:

Single Mass Flywheel - E34 M5 Clutch Geometry
Performance Clutch Disc and Pressure plate
Throw-out Bearing
Pilot Bearing
Clutch Alignment Tool
Flywheel Bolts - Qty 8
Pressure Plate Botls - Qty 6
Clutch features:

Torque Capacity (Crankshaft):
400 Ft / Lbs
Clutch Disc:
240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life
OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement
Pressure Plate
Increased clamp force over OEM, rated at 1,729lbs of pressure
Flywheel features:

Eliminates factory dual mass
Improved throttle response
Improved acceleration
Hardened 4140 Chromoly Steel
Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel
Weighs in at just 16.5lbs vs Factory Dual Mass - 25.3 lbs
SFI certified
Fitment:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed)

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the OVAL shifter carrier bushings (some BMW models have round bushings).

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic M3
1999-2002 E46 BMW 328i 328ci 330i 330ci
2001-2006 E46 BMW M3
1997-2003 E39 BMW 540i M5
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
1999-2003 E52 BMW Z8

We carry the OEM BMW axle shafts made by Loebro due to the high failure rate of aftermarket axles. By purchasing a OEM Loebro axle shaft you can be assured of a high quality part. This axle shaft also known as a front driveshaft and it fits BMW E46 325xi, 325xi Wagon, and 330xi from 2001-2005.

GKN is a global company specializing in meeting the needs of the growing automotive industry. Every time you travel by road or air almost anywhere in the world it is likely that GKN is helping you on your way. Designing, manufacturing and service systems and components for original equipment manufacturers, GKN is also competitive in the automotive aftermarket.

Continuously evolving, pioneering new technologies and reinventing existing ones, GKN is always striving to better themselves in everything they do.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi, 325xi Wagon, 330xi

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.