Please ensure your correct model is selected
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.
Product Benefits:
Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of six for complete BMW Cooper replacement
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
If you're grappling with issues like crankshaft failures and oil pump breakdowns in your BMW 6-cylinder engines, you're not alone. Even seasoned mechanics can overlook the critical aspect of harmonic resonance control in these inline-6 motors, despite their optimal configuration.
Enter ATI Performance Products in collaboration with VAC Motorsports, presenting a solution in the form of new dampers tailored for BMW 2.5L, 2.8L, 3.0L, and 3.2L straight-6 engines found in various models like the E36 and E46 M3, E9X, and E6X, as well as newer Z3s and Z4s. These dampers effectively nullify crankshaft harmonic vibrations, paving the way for enhanced horsepower and torque output, alongside a reduction in internal engine wear. Say goodbye to issues like fractured oil pumps and timing chain mishaps! By pairing these dampers with a VAC accessory pulley, you seamlessly replace the OEM balancer. Featuring a 7” outer diameter and OEM-style timing alignment tabs, these ATI Super Dampers boast SFI 18.1 Safety Certification, ensuring they're competition-ready.
What sets the ATI SuperDamper apart? It's the remedy for vibration woes in inline 6 engines, especially those equipped with lightweight clutch and flywheel setups. Expect diminished wear on bearings, engine accessories, and oil pumps, all while being compatible with underdrive pulleys.
Included in the kit are the damper itself, a lightweight VAC Billet Crankshaft Pulley, along with all necessary mounting and installation hardware. Note that it's not compatible with S50B30 & S50B32 Euro Engines. For street/track vehicles with air conditioning, opting for the Additional A/C Pulley Option is imperative, given that the OE A/C pulley isn't compatible. Rest assured, all required mounting and installation hardware is included, and the entire package is proudly Made in the USA.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
BMW S54 VAC Performance Coated Rod Bearing Kit is highly regarded by BMW engine builders worldwide for its superior quality and performance. Ideal for both forced induction and naturally aspirated builds, these coated bearings are designed to be friction-resistant, reducing the risk of thermal breakdowns due to inadequate lubrication. This feature significantly decreases the chances of premature engine failure in street cars and minimizes the risk of spun bearings during high-stress track conditions.
The VAC Performance Coated Rod Bearing Kit is proven to help maintain engine reliability, even in situations with reduced oil pressure.
VAC Tech Notes:
VAC's S54 Vanos Hub is designed as a direct replacement for the fragile BMW OE Vanos Hub which typically fails due to a broken drive pin. The VAC Hub has an Upgraded Drive Pin design, which is larger in diameter, as well as more material on the outside wall of the pin. In addition, the hub is made from 4340HT Billet Bar and heat treated to the same BMW OE Rockwell Hardness spec. The upgraded design is not only significantly stronger, but the larger diameter Drive Pins also minimize the huge clearance (approximately 1mm) that was in the original design by BMW and reduces the clearance to 0.2mm. This is critical in helping greatly reduce or eliminate the VANOS noise.
Also, this upgraded design eliminates the need for modifying the Pump Ring or having to buy a replacement, which further saves you money!!!
This oil filter housing cap is constructed from high-quality billet aluminum, complete with a black anodized finish for added corrosion resistance. Designed specifically for the S54, this lid replaces the OE part and accepts the OE o-ring.
This part features two 1/8-27 NPT holes that can be used to incorporate oil temperature and oil pressure sensors. Port plugs are included to block off the ports if they are not being used.
Machined with care in-house at VAC Motorsports for perfect fitment, these lids are a perfect replacement for enthusiasts looking to seamlessly integrate oil temperature and pressure sensors without tapping into their oil pan.
Crafted from high-grade domestic USA 6061-T6 Billet Aluminum, these pulleys are a testament to precision engineering. Rigorously tested through extensive hours of racing and street use, they've proven their reliability and performance excellence.
Each pulley is meticulously zero-balanced and thoroughly inspected to ensure zero-runout, guaranteeing optimal performance without compromising on reliability, noise, or vibration.
This comprehensive kit comprises a precision power steering pulley, water pump pulley, and an OE Contitech Brand drive belt. Experience a notable boost of 8hp and 7 ft/lbs. of torque to the wheels, making it ideal for stock vehicles, track cars, and even those with upgraded audio systems seeking consistent voltage output from their alternators.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
09-10-2026
Elevate your BMW's engine performance with Schrick's premium camshafts, crafted with over 40 years of dedication to excellence. Catering to both street and track enthusiasts, Schrick ensures top-quality materials for strength and accuracy. This renowned brand has formed a lasting bond with BMW enthusiasts, providing advanced camshaft options that have stood the test of time.
Upgrade your BMW's engine with the JE Pistons Forged Piston Set designed for the M52 engine. These high-quality forged pistons feature a diameter of 84mm and a compression ratio of 10.5:1, ensuring improved performance and reliability for your BMW.
BMW S54 3.2L VANOS Elimination Kit - Full Kit | VAC Motorsports is designed to replace the original VANOS unit on the S54 engine, offering a comprehensive solution for performance enthusiasts and racers. Engineered and tested by VAC Motorsports, this kit allows for precise camshaft timing adjustments and is ideal for those using standalone ECUs that do not control the dual-VANOS system.
Kit Includes:
NOTE: ONLY COMPATIBLE WITH AFTERMARKET ECUs
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
The BMW JE Piston S54B32 11.5:1 Piston Single 86.50mm is a high-performance piston designed to optimize the power and efficiency of BMW S54 engines. With an 11.5:1 compression ratio, this piston is ideal for those seeking to push the performance limits of their vehicle. Built from top-quality materials, it offers superior durability, making it suitable for both street and track applications. Available at Turner Motorsport, this piston ensures enhanced reliability and a precise fit for BMW S54 engines.
This piston is designed to withstand the demands of high-performance driving while improving overall engine combustion and efficiency. It is an excellent choice for BMW owners looking to improve engine performance, longevity, and power output. Detail: 86.50 mm Bore – 1.220 in. CH, -9.40 CC
The BMW JE Piston S54B32 9:1 Piston Single 87.00mm is a premium performance upgrade designed for BMW enthusiasts looking to enhance engine durability and output. Specifically crafted for the BMW S54 engine, this piston ensures optimal compression and power, providing the necessary strength to handle high-performance driving conditions. Available through Turner Motorsport, this piston is engineered to meet the demands of both street and track driving, offering exceptional reliability.
The precision-crafted piston ensures a perfect fit, allowing for improved combustion efficiency and overall engine performance. It's the ideal choice for drivers seeking to boost their BMW’s power and longevity.
