BMW Tools & Specialty Equipment for BMW E92 M3 S65 4.0L

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Shop Towels 10"x12" - Box of 200 are essential for any workshop or garage, offering superior cleaning and wiping capabilities. Each towel measures 10"x12", providing ample size for various tasks. These shop towels combine cloth-like strength with absorbency, making them ideal for handling spills, cleaning surfaces, and other demanding jobs. The box includes 200 towels, ensuring a long-lasting supply for all your needs.

• Generous Size: Each towel measures 10"x12", providing ample coverage for various tasks.
• Cloth-Like Strength: Designed with durability and strength, ideal for heavy-duty cleaning.
• High Absorbency: Excellent for managing spills and wiping surfaces efficiently.
• Large Quantity: Comes in a box of 200 towels, offering a substantial supply for extended use.

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

The Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set comprises two dozen 1/2-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket
• 21 mm - deep and standard socket
• 22 mm - deep and standard socket
• 24 mm - deep and standard socket

Schwaben Lay Down Interior Car Creeper offers an ideal solution for technicians and hobbyists who need to work comfortably under the dash. Designed to provide a supportive and ergonomic work position, this interior car creeper makes it easier to access hard-to-reach areas within your vehicle. Its cushioned surface ensures maximum comfort during prolonged tasks, reducing strain and fatigue. Perfect for both professional mechanics and DIY enthusiasts, this creeper is a must-have tool for any garage.

• Comfortable Work Position: Provides ergonomic support for under-dash tasks.
• Cushioned Surface: Reduces strain and fatigue during extended use.
• Easy Access: Facilitates reaching hard-to-access areas within the vehicle.
• Ideal for Professionals and Hobbyists: Suitable for both experienced technicians and DIY enthusiasts.
• Durable Construction: Built to withstand regular use in a busy garage environment.

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

The GENIUS2 is NOCO's most potent charger yet. This energy-efficient and compact device is designed to handle both 6-volt and 12-volt batteries, functioning as a charger, maintainer, and desulfator all in one. With a 2-amp rating, it's suitable for various lead-acid batteries used in automotive, marine, and deep-cycle applications, including flooded, gel, AGM, maintenance-free types, as well as lithium-ion batteries.

Features:

• Meet the GENIUS2 - Similar to the G1100, just better. It's 30% smaller and delivers 140% more power. And it's simpler and easier to use than ever before.
• Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
• Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
• Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

2-IN-1 CREEPER SEAT:

The Schwaben 2 in 1 Creeper Seat is a versatile tool designed to enhance convenience in various maintenance tasks. Easily switch from a creeper to a stool, providing flexible options for different work scenarios. As a creeper, it allows you to slide effortlessly under your vehicle, while as a stool, it offers a comfortable seating option for low-height work, reducing strain on your back and knees.

This creeper seat features a thick, padded seat with a large vinyl cushion that remains soft and supportive. The headrest ensures comfort during extended use, and the waterproof, oilproof surface makes cleaning easy. Equipped with six 360° universal casters, it moves smoothly across different surfaces. The ball-bearing casters are compression and wear-resistant, ensuring easy maneuverability.

Constructed from thickened tubular steel, the Schwaben 2-in-1 Creeper Seat supports up to 330 lbs (150 kg), providing a sturdy and reliable platform. In stool mode, the robust frame prevents deformation, rolling, or tilting, ensuring stability.

With a ground clearance of only 3 inches, this creeper seat allows access to narrow, low-clearance spaces, making it ideal for garages and repair shops. Enjoy the convenience of switching between a creeper and a stool, and experience improved comfort and efficiency in your maintenance projects.

Key Features:

• Creeper/Stool All-in-One: Easily converts from a creeper to a stool for versatile maintenance tasks.
• Heavy-Duty Construction: Supports up to 330 lbs (150 kg) with a thickened tubular steel frame; prevents deformation, rolling, or tilting in stool mode.
• Smooth Movement: Six 360° universal casters ensure smooth and flexible movement on various surfaces; ball-bearing casters are compression and wear-resistant.
• Low Ground Clearance: Only 3 inches, allowing access to narrow and low-clearance spaces, perfect for garages and repair shops.
• Comfortable Padded Seat: Thick vinyl cushion with a headrest for extended use without fatigue; waterproof and oilproof for easy cleaning.
• Enhanced Efficiency and Comfort: Reduces strain on the back and knees, making it ideal for both routine maintenance and complex repairs.

Includes:

• 1 x Creeper Rear Frame
• 1 x Creeper Middle Frame
• 1 x Creeper Headrest
• 6 x Swivel Casters
• 6 x Washers
• 4 x M8x55 Hex Head Bolts
• 4 x M8 Lock Nuts

1/2" DRIVE METRIC SOCKET SET:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

 Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

The Schwaben 10 Piece 10mm Master Socket Set is a comprehensive socket solution brimming with robust 1/4 inch and 3/8 inch 10mm sockets, all neatly arranged on a single, convenient rail. Meticulously fashioned from premium chrome vanadium steel, this set is thoughtfully curated with your needs in mind, ensuring you always have the most sought-after socket sizes within arm's reach, regardless of their mysterious disappearance into the depths of your garage. And with our unparalleled LIFETIME REPLACEMENT program, rest assured this set will remain your steadfast companion, enduring even the toughest challenges.

Included in the Set:

• Twistable Socket Rail
• 1/4-inch Drive 6 Point Shallow Socket
• 1/4-inch Drive 6 Point Deep Socket
• 1/4-inch Drive 6 Point Impact Shallow Socket
• 1/4-inch Drive 6 Point Impact Deep Socket
• 1/4-inch Drive 6 Point Flex Socket
• 3/8-inch Drive 6 Point Shallow Socket
• 3/8-inch Drive 12 Point Deep Socket
• 3/8-inch Drive 6 Point Impact Shallow Socket
• 3/8-inch Drive 6 Point Impact Deep Socket
• 3/8-inch Drive 6 Point Flex Socket