BMW Coilovers for BMW E92 M3 S65 4.0L

Clear BMW chassis
Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

Turner Motorsport Coilover Covers - 370mm
Turner Motorsport - Corporate Logo
T#:583230
Part#: TMS-370MMCOILCOV
In Stock
Sale - Save 15% $58.95
$50.11
Free Shipping
Sale - Save 15% $58.95
$50.11
Free Shipping
Especially in the New England area, we find these essential. If you have coilovers on your car and drive your vehicle in inclement weather, especially in areas where they salt, our coilover covers protect your shock bodies, threads, and shaft seal from external contaminants. Our coilover covers give your suspension longer lifespans and a good chance of avoiding seized coilovers after winter weather exposure.
Show More Show Less
BC Racing Rear Damping Adjustment Extenders - BR Type
BC Racing - Corporate Logo
T#:555864
Part#: DMP-EXT
In Stock
$34.95
Free Shipping
The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.
Show More Show Less
Macht Schnell EDC Emulation Module
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
In Stock
$249.95
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    E90/E92 M3 KW Height Adjustable Spring Kit
    KW Suspension - Corporate Logo
    T#:201409
    Part#: 25320057
    In Stock
    $749.00
    Free Shipping
    H.A.S - Height Adjustable Spring Kit

    KW H.A.S - Height Adjustable Spring kits are a great alternative to conventional springs. You can adjust the height of your vehicle with the KW height adjuster. These kits are ideal for cars with either stock type shocks or the factory EDC - Electronic Damping Control - shocks, as the factory EDC system is retained. This lowering solution from KW optimizes the dynamic performance and steering behavior while still using the factory EDC system. This kit contains vehicle specific adjustable spring seats with adjusting KW lowering springs. This complete conversion allows an individual adjustable lowering solution.

  • Individual height adjustability
  • Works with EDC and Non-EDC suspension.
  • Improved looks and vehicle dynamics
  • Optimal Performance
  • Better steering
  • Lifetime warranty!



    Installation Instructions

    This item fits the following BMWs:
    2006-2012 E90 BMW M3 - Sedan
    2007-2013 E92 BMW M3 - Coupe
  • Show More Show Less

    Bilstein B16 Damptronic EDC Coil Over Suspension - E90 M3, E92 M3
    Bilstein - Corporate Logo
    T#:221927
    Part#: 49-237108
    Direct Ship, Expected Ship Date: Oct 18, 2021
    $3,175.00
    $3,175.00
    The Bilstein B16 DampTronic kit is designed to integrate directly with factory electronic damping control systems for BMW E9x M3 with factory EDC (electronic damping control). These coilover systems feature monotube shock absorbers that have been fine-tuned to produce the finest performance possible from the car's electronically controlled suspension module. The threaded body additionally allows for adjustable lowered vehicle ride height of 30mm to 50mm. Bilstein's patented Triple-C-Technology coating ensures long-lasting resistance to corrosion.

    This coilover kit fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2009-2013 E92 BMW M3 - Coupe
    Show More Show Less
    BC Racing BR Series Coilover Suspension Kit - E90/2 M3 (with EDC)
    BC Racing - Corporate Logo
    T#:555854
    Part#: I-13-BR
    Inventory On Order, ETA Aug 5, 2021
    $1,030.00
    Free Shipping

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Specs and Features:

    • 7k Front & 14k Rear Spring Rate
    • S-Barrel front & Linear rear springs
    • Valved specifically to spring style and rate
    • Camber Plate Front Mounts
    • Aluminum and Rubber Rear Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • 2 inch minimum and 3+ Inches of total potential drop
    • Great for Track, Street, and any other conditions
    Show More Show Less

    ISC Suspension 370mm Coilover Cover Pair - BMW & MINI
    ISC Suspension - Corporate Logo
    T#:401902
    Part#: ISC370MMCOVERS
    In Stock
    $55.00
    Free Shipping
    ISC Suspension Coilover Covers are specifically designed to protect your coilovers from the elements and increase the lifespan of the suspension components. The 3mm neoprene material these are constructed of keep out sand, dirt, and salt and keep out water that would all otherwise cause rust and damage to the threads, seals, and any exposed metal components.
    Show More Show Less
    ECS Performance Adjustable Coilover System - E90 M3
    ECS - Corporate Logo
    T#:638470
    Part#: 029311ECS01
    In Stock