BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Active Autowerke - Corporate Logo
T#:638561
Part#: AAAIRFE9XM
In Stock
5% off MSRP $ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD
Free Shipping
5% off MSRP
$ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD
Free Shipping
This allows your engine to breathe easily, making your powerplant more efficient. This filter utilizes two layers of tightly woven cotten fabric - cotton holds oil better, is thinner, and stronger.
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less
KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less

KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Aug 14, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
Active Autowerke - Corporate Logo
T#:397460
Part#: 11-021
In Stock
$ 721.99 USD
Free Shipping
$ 721.99 USD
Free Shipping
Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i exhaust system, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow design and beefy 80mm dual exhaust tips allow 35% to 40% more exhaust flow than the stock BMW 328i exhaust system. The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s Brushed stainless steel construction also makes a bold visual statement, while also increasing durability. Factory-fit specifications are followed closely, yet AA's system allows 14lbs in weight savings as opposed to the factory BMW exhaust. This exhaust features the Active Autowerke Muffler and Noise Cancellation Chamber to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights. NOTE: This exhaust may not easily fit some of the XI (4WD) and Station Wagon Models - welding may be required for proper fitment of the exhaust to stock pipe. Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting points are highlighted in the instructions. Some models have a round tubular pipe that makes the installation seamless. Other models have an oblong shape and will require welding instead of clamping. KEY FEATURES: Fits BMW 325i, 328i, 330i Full 304 stainless steel construction with brushed finish 3" Mandrel-bent piping for optimum exhaust flow Straight through muffler design NCC (Drone Reduction) Dual 80mm Active Autowerke Signature tips, staggered Weight Savings *14lbs lighter than stock BMW exhaust* Designed to use existing factory mounts and hardware Fully adjustable mounting positions Fully adjustable tips Illustrated instruction manual Two year warranty Fits all E9X vehicles with the N52 engine. Requires cutting and welding of the stock system for fitment. Includes instructions for installation process.
Show More Show Less

Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping

Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader
Active Autowerke - Corporate Logo
T#:4416
Part#: AABOVKIT-N54
In Stock
$ 565.99 USD
Free Shipping
$ 565.99 USD
Free Shipping
As Used on Project E92 335i
When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i
Show More Show Less
Active Autowerke - Corporate Logo
T#:340366
Part#: N55CP-KIT
Ships in 3 Business Days
Starting at $ 189.99 USD
Free Shipping
Starting at $ 189.99 USD
Free Shipping
One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
Show More Show Less


Active Autowerke - Corporate Logo
T#:397308
Part#: 15-011
Ships in 3 Business Days
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.
Show More Show Less
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
Active Autowerke - Corporate Logo
T#:397446
Part#: 11-015
Ships in 3 Business Days
$ 1,519.99 USD
$ 1,519.99 USD

True performance, durability, and attractive weight advantages with innovative features places the Active Autowerke E9X BMW M3 exhaust in a class of its own. This system is constructed from 100% 304-stainless steel and features adjustable Active Autowerke double walled tips, making it ideal both for 2-door and 4-door models (also allows for cleaner fitment with diffusers).

This system uses factory style flanges making it a complete bolt on system that requires no cutting or welding. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust.

The sound is unobtrusive, with a rich mellow tone and delivers a solid 5+hp, with key gains in the mid-range. In addition, the Active Autowerke E9X M3 Signature Exhaust system features large 3" piping for maximum exhaust flow while maintaining enough back-pressure to result in horsepower increases across the entire RPM range.

The factory E9X M3 muffler features a Noise Canceling Chamber inside the muffler and Active Autowerke has retained this feature by adding two custom Active Autowerke noise canceling chambers (NCC)on each muffler to reduce/minimize the drone (the 'booming' noise some muffler emit at cruising speeds, ~3500 rpm).

The Active Autowerke E9X M3 Signature Exhaust System provides increase in horsepower, great sound and appearance making it a must for the true M3 enthusiasts.


Features:

  • Large 3-inch mandrel bent piping for maximum flow 
  • Durable, 100% 304 brushed stainless steel 
  • Double-walled 76mm Signature stainless tips
  • Revolutionary NCC -Noise Cancelling Chamber 
  • Adjustable Tips with Embossed Active Autowerke Logo
  • Improved power & torque throughout entire RPM band 
  • Gains of 5+ HP over stock configuration; Additional HP with our programmed software 
  • BMW factory style hardware makes a truly easy installation with no need for cutting or re-welding 
  • Weighs 40 Lbs vs. the factory of 55.1 Lbs.
  • Complete illustrated instruction manual
  • Two year warranty
Show More Show Less

Active Autowerke - Corporate Logo
T#:388675
Part#: 340366TCKD4AMN6T
Ships in 3 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping

Autel - Corporate Logo
T#:2914129
Part#: AL529HD
Ships in 6 Business Days
$ 264.99 USD
Free Shipping on orders $49 and up
Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.
Active Autowerke - Corporate Logo
T#:340094
Part#: AASC-E9XM3
Ships in 10 Business Days
Starting at $ 9,995.00 USD
Starting at $ 9,995.00 USD
The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.
Show More Show Less

Active Autowerke - Corporate Logo
T#:2302749
Part#: 14-016
Ships in 10 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
CNC machined coolant/water thermostat bypass tube to improve flow on and off the track. Easy plug and play installation and a durable anodized coating make this a simple and reliable temperature control solution.
Show More Show Less
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less
Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less


Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors
Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 6 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
Active Autowerke - Corporate Logo
T#:397305
Part#: 12-030
Ships in 10 Business Days
5% off MSRP $ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD
Free Shipping
5% off MSRP
$ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD
Free Shipping
Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 700 horsepower and 480 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.
Show More Show Less

Power Pulley DPK Belt Kit
For vehicles with production date from 6/2008
For vehicles with production date from 6/2008
Active Autowerke - Corporate Logo
T#:50934275
Part#: 13-001D
Ships in 3 Business Days
New Item
$ 75.00 USD
Free Shipping on orders $49 and up
$ 75.00 USD
Free Shipping on orders $49 and up
Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397304
Part#: 12-029
Ships in 10 Business Days
5% off MSRP $ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD
Free Shipping
5% off MSRP
$ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD
Free Shipping
Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 640 horsepower and 413 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.
Show More Show Less
Autel - Corporate Logo
T#:2914140
Part#: MV400-55
Ships in 6 Business Days
$ 405.99 USD
Free Shipping on orders $49 and up
This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.

Autel - Corporate Logo
T#:40782369
Part#: AUL-TS508WFK-1
Ships in 6 Business Days
$ 419.99 USD
Free Shipping on orders $49 and up
The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
Show More Show Less