BMW Brakes & Brake Parts for BMW 3 Series E92 (2007-2013)

Clear BMW chassis
Some of the most critical components of your BMW are those of the brake system. Whether you are performing maintenance on your daily driver or stocking up on performance brakes for race season, keeping your brakes in working order is paramount to enjoying your car. At Turner Motorsport, we have everything you need to replace or upgrade your brake pads, brake rotors, brake lines, and brake fluid. Choose from our excellent selection of brake components to keep your BMW stopping confidently.

Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed
Turner Motorsport - Corporate Logo
T#:176959
Part#: BBMCV
In Stock
$22.95
Free Shipping on orders $99 and up
This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

Works on just about all brake systems so no need to have specialized adapters or bleed screws.
Schwaben 11mm Brake Bleeder Wrench
Schwaben - Corporate Logo
T#:362403
Part#: 000550SCH01A
In Stock
$20.95
Free Shipping on orders $99 and up
Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
StopTech Street Performance Brake Pads - Front - E60, E63, E65, E82 1M, E9X 335, E9X M3
StopTech - Corporate Logo
T#:12164
Part#: TMS12164
In Stock
$98.75
Free Shipping
As used on the Lime Rock M3
StopTech Street Performance front brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both front calipers

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW 335d 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW 525i automatic transmission only
2004-2010 E60 BMW 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li

Schwaben 3-Liter European Pressure Brake Bleeder
Schwaben - Corporate Logo
T#:363245
Part#: 007237SCH01A
In Stock
$54.95
Free Shipping on orders $99 and up

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

 

Features:

  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not  exceed 20 PSI
  • One-year warranty

Schwaben 3-Liter Premium European Brake Bleeder
Schwaben - Corporate Logo
T#:387031
Part#: 007237SCH01AKTKT
In Stock
$60.54
Free Shipping on orders $99 and up

This Premium European Brake bleeder features a Heavy-Duty aluminum master cylinder cap adapter for extra long life. Complete with the Schwaben quick couple fitting that can be used on most European cars.

Holds a full 3-Liters ( 3.17 qts) of brake fluid. Easy to read 0-30 lbs pressure gauge built into the tank top. The filling cap features a pressure relief valve for safe release of pressure. A full 40" hose with detachable swivel fitting at tank, allowing for complete disassembly and quick easy cleanup.There is a quality chrome quick coupler on master cylinder end of hose that snaps into master cylinder cap. This feature will allow you to disconnect hose from screw on cap without spilling a drop of fluid.  Recommended  working pressure of 10 PSI.

Extra plastic cap also included.

Hawk HPS 5.0 Street Sport Brake Pads - Front - E9X 335, E9X M3
Hawk - Corporate Logo
T#:206113
Part#: TMS206113
In Stock
$136.04
Free Shipping
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
  • Better stopping power even when the pads are cold
  • Good initial bite (more than on Hawk HPS)
  • Excellent resistance to fade during street use
  • Moderate dust during normal street driving
  • Quiet operation
  • Easy on rotors

This pad set includes pads for both FRONT brakes.

Applications:
2011+ E82 BMW 1M Coupe
2008-2011 E9X BMW 328i, 328Xi,/b>
2007-2011 E9X BMW 335i, 335Xi, 335d
2008-2011 E9X BMW M3
2004-2005 E60 BMW 525i (automatic transmission only)
2006-2007 E60 BMW 525i, 525xi (all transmissions)
2008-2010 E60 BMW 528i, 528xi
2004-2007 E60 BMW 530i, 530xi
2008-2010 E60 BMW 535i, 535xi
2004-2010 E60 BMW 545i, 550i
2004-2010 E63 BMW 645Ci, 650Ci
2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li

Stoptech Stainless Steel Brake Lines - E90/E92/E93/E82 325i 328i 330i 335i 128i 135i
StopTech - Corporate Logo
T#:2852
Part#: PLBE9X335I
In Stock
$124.95
Free Shipping
These braided stainless steel lines for the 2006+ E9X 3 Series and 2008+ E82 1 series improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2006+ E90 E92 E93 BMW 325i 328i 330i 335d 335i (RWD models)
2008+ E82 E88 BMW 128i 135i
ECS Performance Caliper Guide Bushing Set - Most Models
ECS - Corporate Logo
T#:362994
Part#: 003326ECS01
In Stock
$106.95
Free Shipping

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 


StopTech Street Performance Brake Pads - Rear - E60, E63, E82 1M, E9X M3
StopTech - Corporate Logo
T#:12172
Part#: TMS12172
In Stock
$79.33
Free Shipping
StopTech Street Performance rear brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both rear calipers (should only be combined with StopTech Street Performance front pads).

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6

E9X M3 Stoptech Stainless Steel Brake Lines (2008+ E90/E92 M3)
StopTech - Corporate Logo
T#:2530
Part#: PLBE9XM3
In Stock
$124.95
Free Shipping

These braided stainless steel lines for the 2008 and newer E9X M3 improve the performance and safety of your M3's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. They fit all 2008, 2009, 2010 (and newer) BMW M3 V8. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2011 E82 BMW 1M Coupe
2008-2013 E90 M3 sedan
2008-2013 E92 M3 coupe
2008-2013 E93 M3 convertible
Rotor And Pad Replacement Package - Front And Rear - E9X M3, E82 1M Coupe
Packaged by Turner - Corporate Logo
T#:558208
Part#: E9XM3RPRPKT
In Stock
$1,150.79
$1,150.79

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Pagid Front & Rear Brake Pads
  • Zimmerman Front & Rear Rotors
  • New Front & Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

StopTech Caliper Piston Rebuild Kits
StopTech - Corporate Logo
T#:348620
Part#: TMS213589DK
Direct Ship
Starting at $25.00
Starting at $25.00

Stoptech Big Brake calipers are designed to be serviced and rebuilt just like any factory caliper. The pistons will probably last the life of the car but the seals can become brittle from extreme heat or extreme cold. Sometimes they just get damaged from debris. For racing environments it's best to rebuild the calipers often (maybe even several times a year). At least you should always have spare caliper seals on hand.

These are the genuine Stoptech caliper seals (dust boots and pressure seals). We sell these to service a PAIR of pistons (1 boot and 1 seal per piston). You will need to measure your existing pistons or seals to order the correct rebuild kits. Sorry, there are too many variables to tell you which pistons you have with only your car info. It's easy to measure and you don't have to remove the pistons from the calipers. Stoptech pistons are metric sized and in 2mm increments. Use the chart below to match your measurments to a rebuild kit.
 

There are a few ways to determine which caliper seals you need. You can measure from the overall outside diameter of the dust boot (A); the inside diameter of the piston (B); or the outside diameter of the piston body (not the tip protruding from the seal!) (C). If measuring the piston body the whole piston has to come out of the caliper housing. Just measuring the tip will give a false measurement. Remember to measure each of your pistons as piston sizes can vary even within the same caliper. Click the image at left for a larger version.

 

Use the table below to determine which Stoptech rebuild kit you need:

Outer Boot
Diameter, "A"Piston Inner
Diameter, "B"Piston Outer
Diameter, "C"Stoptech Kit #

3611.7026143.99026K

3813.4528143.99028K

4015.2030143.99030K

4216.9532143.99032K

4418.7034143.99034K

4620.4536143.99036K

4822.2038143.99038K

5023.9540143.99040K

5225.7042143.99042K

5427.4544143.99044K

5629.3046143.99046K


We sell rebuild kits for a PAIR of pistons - 1 seal and 1 boot per piston. For example -
For a 4-piston caliper you only need to order 2 rebuild kits.
For a 6-piston caliper you only need to order 3 rebuild kits.
But make sure you measure each piston!

These rebuild kits fit with StopTech caliper pistons only. Sorry, returns are not accepted for opened piston seal kits.