Home
Intake
Charge Pipes & Turbo Inlets

Charge Pipes & Turbo Inlets for BMW 3 Series E92 (2007-2013)

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.

Sort By:

Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:599103

Part#: TMSN54STIH

Ships on Jan 26, 2027

Sale - Save 20% $ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD

Add to Wish List

Sale - Save 20%

$ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD

Add to Wish List

If you have owned your BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N54 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport N54 Silicone Turbo Inlet Hoses! Silicone inlet hoses are extremely reliable, resisting heat and pressure significantly better than plastic. This is perfect people who are just looking for a simple, reliable upgrade, or people who want to push the limits of their BMW and are looking to make more boost and more power without worrying about failing inlets. Available in two sizes, our kits can support either stock (44mm) or upgraded (50mm) turbos and include adapters to reconnect your turbo bypass pipes. If you plan to upgrade your charge pipes, replace the stock diverter valves with aftermarket atmospheric blow-off-valves, or want to convert your BMW to a catch can system, we also recommend the optionally available Turner Motorsport N54 Inlet Hose Plug Kit. This kit blocks off the turbo bypass pipe connections and PCV connections that will no longer be needed.

Show More Show Less

MMX Upper Charge Pipe Kit - N55 E8x/E9x

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
For Vehicles with N55 Engine

T#:4538270

Part#: MMR02-0201

Special Order: No Guaranteed ETA

$ 308.99 USD

Add to Wish List

Qty

$ 308.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered E8x/E9x. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Replacement high-flow aluminum charge pipe with CNC leak-free connection Silicone coupler hose and two stub hoses Replacement c-clip Jubilee clips o-ring

Show More Show Less

Carbon Fiber Cold Air Intake Tube - E9x M3

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
CARB certified for sale in all 50 states

T#:5844247

Part#: D760-0024

EO#: D-176-40

Ships in 5 Business Days

Sale - Save 10% $ 599.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 599.99

This product was last offered at the strikethrough price on
09-28-2026

$ 539.96 USD

Add to Wish List

Dinan's intake tube is built with the highest quality components and improves the look and performance of your M3 engine with a beautiful carbon fiber connecting pipe and injection molded rubber boots. While the carbon fiber intake tube is strictly a cosmetic part and gives no power boost, it does give the engine compartment an elegant refinement when the hood is popped. Features: Replaces plastic intake tract with carbon fiber tube & rubber connecting hoses. Retains stock air filter.

Show More Show Less

Hard Pipe With Single Valve - N54

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:377213

Part#: FMBM335DV1

Ships on Nov 17, 2026

Sale - Save 10% $ 481.99

This product was last offered at the strikethrough price on
10-26-2026

$ 433.35 USD

Add to Wish List

Qty

Sale - Save 10%

$ 481.99

This product was last offered at the strikethrough price on
10-26-2026

$ 433.35 USD

Add to Wish List

This alloy hard pipe fits to the throttle body and incorporates our high flow Blow off valve. This new valve fresh from our R&D department is the largest displacement valve that Forge have ever made ! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet ! The piston uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.

All parts are included in the kit, for your installation, along with comprehensive instructions.

This product fits the following BMWs:
2008 - 2013 E82 135i
2007 - 2013 E9x 335i

Show More Show Less

Hard Pipe With Twin Valves - N54

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:377212

Part#: FMBM335DV2

Ships on Nov 17, 2026

Sale - Save 10% $ 860.99

This product was last offered at the strikethrough price on
10-26-2026

$ 774.25 USD

Add to Wish List

Qty

Sale - Save 10%

$ 860.99

This product was last offered at the strikethrough price on
10-26-2026

$ 774.25 USD

Add to Wish List

This alloy hard pipe fits to the throttle body and incorporates dual high flow Blow off valves. These new valves, fresh from our R&D department are the largest displacement valves that Forge have ever made ! Featuring a 50mm (2”) aluminium pistons so that there are no issues with split diaphragms, we have not found the power handling limits of these valves yet ! The pistons uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.

All parts are included in the kit, for your installation, along with comprehensive instructions.

This product fits the following BMWs:
2008 - 2013 E82 135i
2007 - 2013 E9x 335i

Show More Show Less

MMX Charge Pipe Kit - N54 E8x/E9x

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
For Vehicles with N54 Engine

T#:4538267

Part#: MMR02-0101

Special Order: No Guaranteed ETA

$ 311.99 USD

Add to Wish List

Qty

$ 311.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N54-powered E8x/E9x. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Replacement high-flow aluminum charge pipe with CNC leak-free connection Silicone coupler hose and two stub hoses Replacement c-clip Jubilee clips o-ring

Project Cars

SELECT YOUR BMW

Charge Pipes & Turbo Inlets for BMW 3 Series E92 (2007-2013)

Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location ...

MMX Upper Charge Pipe Kit - N55 E8x/E9x

Carbon Fiber Cold Air Intake Tube - E9x M3

Hard Pipe With Single Valve - N54

Hard Pipe With Twin Valves - N54

MMX Charge Pipe Kit - N54 E8x/E9x

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results