E9X Macht Schnell Driver Side Clubsport Seat Mount

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:16907171

Part#: 70.10.203

Ships in 3 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Macht Schnell Passenger Side Clubsport Seat Mount - E9X BMW

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:16907173

Part#: 70.10.204

Ships in 4 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Seat Sliders - 1 Set

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:3872373

Part#: SBR-001

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Planted Seat Bracket - Driver / Left - E92 Coupe

For coupe models only

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:19924421

Part#: SB120DR

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Passenger / Right - E92 Coupe

For coupe models only

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:19924422

Part#: SB120PA

Ships in 4 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Bucket Side Brackets 2pcs w/ NRG logo

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5774230

Part#: RSC-100MB-NRG

In Stock at Vendor

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

NRG Bucket Side Brackets 2pcs w/ NRG logo

Upgrade your BMW's racing setup with NRG Bucket Side Brackets, featuring 2 pieces adorned with the NRG logo. These brackets provide secure and adjustable mounting for bucket seats, enhancing both style and functionality. Crafted for durability and reliability, they ensure a snug fit for your BMW's seats, optimizing support and stability during high-performance driving. Elevate your racing experience with NRG Bucket Side Brackets, designed to meet the demands of enthusiasts and professionals alike.

Secure and adjustable mounting for bucket seats
Enhances style and functionality with NRG logo
Durable construction for long-lasting performance
Ensures snug fit for BMW seats
Optimizes support and stability during high-performance driving

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Seats & Seat Accessories for BMW 3 Series E92 (2007-2013)

Sub-Categories

E9X Macht Schnell Driver Side Clubsport Seat Mount

Macht Schnell Passenger Side Clubsport Seat Mount - E9X BMW

Seat Sliders - 1 Set

Planted Seat Bracket - Driver / Left - E92 Coupe

Planted Seat Bracket - Passenger / Right - E92 Coupe

Bucket Side Brackets 2pcs w/ NRG logo

NRG Bucket Side Brackets 2pcs w/ NRG logo

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results