Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E92 Brake Cooling Ducts & Backing Plates

BMW E92 Brake Cooling Ducts & Backing Plates Plan on tracking your car? Going to be using real track/race pads? You're going to need brake cooling ducts and hose. Brakes create lots of heat and temps can rise to damaging levels. Excessive heat will burn up caliper seals and dust boots, boil brake fluid, lead to rapid pad wear, inconsistent pedal feel, damage rubber boots on suspension ball joints, and other problems. Racing brake pads are designed to work in very specific temperature ranges so to prevent them from exceeding those temps race teams rely on brake cooling ducts, silicone hose, and bumper ducts.

We have designed and produced advanced brake backing plates that fit behind the wheel bearing hub. The backing plates have an inlet duct that directs air to the center of the hub/rotor. From there, cooling vanes in the rotor draw the air through the rotor to cool it. By keeping the rotor cool it won't transfer as much heat through the pads, caliper, and rest of the braking system. Our kits are designed to fit to the hub without having to remove the hub/bearing.
You're currently viewing parts for your (E92) 3-Series Coupe 2007-2013. Reset your chassis
For accurate results, specify your model below.
HARD Motorsport Brake Cooling ClubSport Kit - BMW E9X M3

Keeping cool on the race track is important. Hard Motorsports has you covered with the ultimate E90/E92 M3 BMW Brake Cooling Duct Race Kit. Providing directed air flow to your brakes at a much higher volume than stock cooling ducks, this kit is made specifically for track applications to help prevent brake fade. This increased flow helps prevent excessive wear and rotor warping, letting your brakes last longer and stronger. Works with all M3 E90/E92 BMW's

Product Attributes:

  • Directed cooling
  • Large flexible ducting
  • Brake dust shield with hose mount
  • Mounting bracket included


This item fits the following BMWs:

E90 BMW M3

HARD Motorsport
Part #: brkcoolclbsprtKT
Price: $474.05 (USD) 
$499.00 (Sale - Save 5%)
Direct Ship
E90/E92 M3 GT4 Brake Ducts (Genuine BMW Motorsport) Very rare item, direct from BMW MOTORSPORT GMBH! These hand-made prototype style brake ducts are the same used on all of the M3 GT4. Each has 2.7" inch / 68mm outside diameter outlets, which can be connected to corresponding duct hose (not included). This item includes one left brake duct, and one right brake duct, as pictured.

This can be used on any 2008+ E9x M3, including E90 M3 sedan, E92 M3 coupe and E93 M3 convertible.
Genuine BMW Motorsport
Part #: 51748321767-768
Price: $499.90 (USD) 
Ships on Aug 1, 2018
Free Shipping Free Shipping
Brake Duct Hose Kit - 3 inch with clamps If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose we use in our renowned racing brake duct kits & our championship winning BMW race cars. This is the best suited and highest quality hose for the job. We wouldn't use anything less -- would you?
Turner Motorsport
Part #: TBR9962303
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
E82, E9X Turner Motorsport Steering Rack Stop Kit Whether it is installing new wider wheels, tires, brake ducts, shocks, or springs, there could be a rubbing issue on the inside of your fender well. Our Rack Stops will help protect your investment. Rack Stops are spacers that install inside of the tie rod and limits the amount of steering travel. You can save the costs of replacing rubbing tires, worn out brake ducts, cut shock reservoir hoses, and broken underside plastic panels. There is also the added benefit of knowing you can turn the steering wheel to full lock and not be worried that the wheels will rub. Our Rack Stop width is the approximate distance that will be removed from the tire’s path. For example, if a 20mm rack stop is used, there will be 20mm more clearance for a brake duct between the fender well and the edge of the tire. Included with this kit: 2 Delrin rack stops, 2 zip ties, and detailed instructions.

Fitment notes:
A) not for cars with electric power steering (EPS) or Active Steering
B) not for AWD Xi models

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Part #: TSU9090001
Price: $16.74 (USD) 
$29.95 (Sale - Save 44%)
In Stock
Free Shipping Free Shipping
on orders $99 and up