Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.

Key Benefits:

Reinforced mounting ear for strength and stability
16% Increased fluid capacity
External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:

Fits manual transmission Large Case 215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug

Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.

Key Benefits:

Reinforced mounting ear for strength and stability
16% Increased fluid capacity
External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:

Fits manual transmission Large Case 215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug

Gaining a prominent edge over the competition is now within reach, thanks to the MFactory Helical Limited Slip Differential offered by Turner Motorsport. This Helical LSD ensures a seamless and uniform distribution of power to your BMW's wheels, significantly enhancing traction whether you're on the street, strip, or track. It's an absolute necessity for BMW enthusiasts.

Curious about the LSD's role? Without it, your car essentially operates as a one-wheel-drive machine, delivering torque solely to the wheel with less grip. This is where the Helical LSD shines, as it allows both wheels to receive power by limiting the speed difference between them, in contrast to the open differentials found in most vehicles.

Key Features:

• 30-Day Feel the Torque™ Money Back Guarantee: An industry-first assurance that enables you to experience the difference. Furthermore, it comes with a Limited-Lifetime Warranty, offering peace of mind.
• Forged and Cryo-Tempered: Engineered to deliver exceptional durability and extended lifespan, ensuring it can withstand the rigors of even the most demanding challenges.
• Advanced Shot Peening Technology: Enhances surface hardness, making it well-equipped to handle the shocks experienced in competition-level drag racing.
• Maintenance-Free Gears: Bid farewell to the hassles associated with special fluids or rebuilds commonly required for plate LSDs. It's designed for a trouble-free ownership experience.
• Lock-Free Operation: Ensures there's no adverse impact on steering response, delivering a smooth driving experience.

Break-In Procedure: For optimal performance, it's recommended to change the fluid after the first 3-400 miles of use.

Please note that any defects or warranty claims should be directed to Team MFactory.

Differential Rebuild Kit Plus by Team MFactory

Upgrade your BMW's differential with the Differential Rebuild Kit Plus by Team MFactory. Whether you've recently replaced your differential or upgraded to a Limited-Slip, it's essential to replace the hardware to ensure optimal performance. This comprehensive kit from ECS Tuning includes 10 Differential Ring Gear Bolts, new axle seals, and new differential bearings, providing everything you need for a complete differential rebuild. With high-quality components, you can trust this kit to support your new differential or rebuild your existing unit effectively.

• Comprehensive kit includes Differential Ring Gear Bolts, axle seals, and differential bearings
• Ensures optimal performance of your BMW's differential
• Perfect for differential replacement or upgrades to Limited-Slip
• High-quality components for reliability and durability
• Provides all necessary hardware for a complete rebuild

Upgrade your BMW's drivetrain with this comprehensive kit that includes a new pumpkin for a hassle-free bolt-in replacement. Plus, enjoy the added benefit of a $500 refundable core charge. For any defects or warranty claims, please directly reach out to Team M Factory.

• Complete hardware replacement kit
• Includes 10 Differential Ring Gear Bolts and new axle seals
• Ensures optimal performance for your differential
• Ideal for upgrading to a Limited-Slip differential or restoring your existing one
• Hassle-free installation process

Often overlooked, scheduled rear differential service is very important. Over time gear lube breaks down causing bearings and internal components fail. Regular maintenance will keep your vehicle running properly for years to come.

Please see kit contents tab for included items.

Unleash the full potential of your BMW and gain a competitive edge with the Turner Motorsport MFactory Metal Plate Limited Slip Differential. Engineered for superior performance, this differential ensures a smooth and consistent distribution of power to the wheels, maximizing traction and putting the power firmly on the ground. The 1.5-way design provides torque transfer during acceleration and halfway through deceleration, making it an ideal choice for those focused on track use.

• Prominent advantage with the MFactory Metal Plate Limited Slip Differential.
• Maximizes traction for enhanced vehicle performance.
• 1.5-way design for torque transfer during acceleration and deceleration.
• Turns your car into a true 2-wheel drive, improving grip.
• Ideal for track enthusiasts seeking superior handling.

Upgrade your BMW's drivetrain with the Turner Motorsport MFactory Metal Plate Limited Slip Differential for unmatched toughness and performance.

BMW E60 E90 E92 Re Manufactured Front Differential from Turner Motorsport offers a reliable and cost-effective solution to restore your BMW's drivetrain performance. This high-quality, re-manufactured differential is engineered to meet or exceed OEM standards, ensuring smooth power delivery and optimal handling. Designed to replace a worn or damaged differential, this unit provides the dependability and durability you expect from Turner Motorsport's expertise in BMW components.

• Precision re-manufactured to meet OEM specifications
• Enhances power distribution and vehicle handling
• Cost-effective alternative to a new differential
• Designed for a smooth and quiet driving experience
• Backed by Turner Motorsport’s commitment to quality

Replace your worn front differential with the BMW E60 E90 E92 Re Manufactured Front Differential for a renewed driving experience and superior performance.