Skid Plates for BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

If your car is lowered, we recommend adding protection to your engine with one of our BMW skid plates, especially If your car has any low hanging critical components like an oil cooler. We make all of our skid plates from thick aluminum for maximum protection.
Sort By:

Turner Aluminum Skid Plate - E9x M3
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:395281
Part#: 021807TMS03
In Stock
$ 895.99 USD
Free Shipping
$ 895.99 USD
Free Shipping
*Click here for installation instructions.* The E9x M3 belly pan is a constant point of impact for parking curbs, inclines, and road debris. Fortunately, there is usually little damage other than the brittle belly pan plastic and side covers which is still not a cheap expense. The Turner Motorsport skid plate is the ultimate upgrade for your belly pan replacement woes, simply being the final replacement for nearly the same cost as the plastic OE replacement. Turner made a decision to move forward with a black powder coat finish so the skid plate blends in close to the OE look and stays looking good under normal wear. Even though things look similar there are a lot of features taken into consideration when this was designed. The plates mount slightly higher offering even more ground clearance, so there is less chance of impact even though the this skid plate will provide all the strength you need to feel safe. Manufactured from 3/16" 5052 Aluminum at the center plate and 1/8" thick aluminum side plates fastened to the M3 with 1018 steel brackets that perfectly integrate with the factory liners and mounting points. When installing this skid plate there is zero modification required to mount this to your car making this upgrade completely reversible if desired. Watch to learn more about Turner E9x M3 Skid Plate Installation All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware. Kit contents: 3/16” thick aluminum main plate and 1/8” thick aluminum side plates 1018 powder coated steel tube support braces for maximum skid plate strength Retains factory air duct for oil cooler Maintains wheel liner mounting positions Contains all necessary stainless mounting hardware and components (OE rubber trim from the vent will need transferred) No modification necessary; easy to convert back to stock Made in America For replacement hardware, refer to T#393358
Show More Show Less
Turner Milled Finish Aluminum Skid Plate - E9x Non-M RWD
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Does Not Fit M-Sport Models
Turner Motorsport - Corporate Logo
T#:594152
Part#: 028534TMS01-01KT
In Stock
Sale - Save 10% $ 654.99

This product was last offered at the strikethrough price on
11-07-2026

$ 589.49 USD
Free Shipping
Sale - Save 10%
$ 654.99

This product was last offered at the strikethrough price on
11-07-2026

$ 589.49 USD
Free Shipping
Upgrade your brittle plastic under belly shield to our Turner E9X Skid Plate for maximum protection!
Turner Skidplate - XDrive, E90 E91 E92
For vehicles with standard bumper. Does not fit "Sport" or "M-Sport" bumpers.
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:17272967
Part#: 047180LA02KT
In Stock
Sale - Save 15% $ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 356.14 USD
Free Shipping
Sale - Save 15%
$ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 356.14 USD
Free Shipping

Having a skid plate/splash guard has more purpose than you would believe. The skid plate is used to not only protect your underbody from rogue debris damaging the oil pan, but the other great benefit is protecting your drive belts and pulleys! When you open your hood and look down in front of your engine you see a series of drive belts and most likely you can see straight to the ground where there was originally a splash guard. When driving you are exposing your drive belts to the water, dirt and debris on the road which can lead to premature failure drive belts and accessories (Or even worse, the dreaded belt squeak.)

The E90/E92 plastic belly pan is a constant point of impact for potholes, speedbumps, inclines, and road debris(we saved one of our customers already, just take a look at the pictures). By now your factory belly pan is either falling off, broken into pieces or missing all together. Our skid plate for the E9x chassis is designed to replace the factory plastic splash shield. Instead of replacing your belly pan with another plastic one, upgrade to a full 8 gauge aluminum skid plate for your last belly pan purchase! The skid plate is designed with slotted mounting locations for ease of install and retains the factory jack-point on the subframe.

Our Aluminum Skid Plate is the ultimate upgrade in security for your E9X! This skid plate is a direct replacement for the OE belly pan, with the added benefit of durability from its heavy duty aluminum construction there is no question you should have one on your vehicle. Keep your engine bay clean, your drive belts functioning properly and your engine safe from hazards on the road.

Features:

Designed to protect and preserve the underside of the vehicle from any potential road debris
Replaces torn/tired plastic OEM shield
Rugged 8GA 5052 Aluminum construction
Slotted mounting locations for ease of install
160mm diameter cutaway used to retain the use of the OEM subframe jack point
Includes factory BMW hardware for installation
Designed and manufactured in the USA

Show More Show Less

Turner Wrinkle Black Aluminum Skid Plate - E9x Non-M RWD
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Does Not Fit M-Sport Models
Turner Motorsport - Corporate Logo
T#:594149
Part#: 028534TMS01-02KT
In Stock
Sale - Save 10% $ 593.99

This product was last offered at the strikethrough price on
11-07-2026

$ 534.59 USD
Free Shipping
Sale - Save 10%
$ 593.99

This product was last offered at the strikethrough price on
11-07-2026

$ 534.59 USD
Free Shipping
The ultimate upgrade in E9X underbelly protection!

Delrin bumper protection Skid Plates - 12.5"
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:395767
Part#: 013770TMS02KT
Back Ordered
$ 337.99 USD
Free Shipping
$ 337.99 USD
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Show More Show Less
Performance Coilover Suspension System With Aluminum Skid Plate - E9X...
For vehicles with standard front bumper (non-M Sport)
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:47473706
Part#: 028534TMSDBKT
In Stock
Sale - Save 19% $ 1,731.98

This product was last offered at the strikethrough price on
11-07-2026

$ 1,399.00 USD
Free Shipping
Sale - Save 19%
$ 1,731.98

This product was last offered at the strikethrough price on
11-07-2026

$ 1,399.00 USD
Free Shipping

Take your E9X to the next level with this limited-time bundle, combining Turner Motorsport Adjustable Coilovers with a Heavy-Duty Aluminum Skid Plate. Lower your ride with precision, improve handling, and protect your undercarriage—all in one package.

ECS Performance Adjustable Coilover System

Designed for drivers who demand both performance and comfort, the ECS Performance Coilovers elevate your BMW’s handling without compromising daily drivability. These coilovers provide a smooth, stock-like ride while giving your car an aggressive stance and dramatically improved cornering confidence—all at a fraction of the cost of top-tier alternatives.

Key Specs & Features:

Spring Rates: Front 8kg/mm, Rear 12kg/mm

32 levels of rebound damping adjustment for tailored ride quality

Adjustable monotube shocks/struts with progressive-rate coil springs reduce body roll and enhance road-hugging grip

Adjustable front bodies allow precise ride height setup while maintaining proper spring preload

Front and rear adjustable bodies ensure shocks operate in the correct valving range at any ride height

Durable, High-Quality Construction:

Gloss black powder-coated strut and shock bodies for longevity and aesthetics

Clear zinc-coated threaded sections for corrosion resistance

Powder-coated Reflex Silver Metallic springs

Red anodized billet aluminum lower spring seats with locking collars for easy, on-car adjustment

Integrated bump stops for improved suspension performance

Turner Aluminum Skid Plate Kit – Wrinkle Black

Protect your E9X undercarriage from potholes, speed bumps, road debris, and inclines with Turner Motorsport’s heavy-duty aluminum skid plate. This direct OE replacement provides far superior durability than the factory plastic belly pan, offering peace of mind for daily driving or aggressive lowering.

Features & Benefits:

Constructed from robust 5052 aluminum for lasting protection

Massively improved durability over the OE plastic belly pan

Access door allows easy oil drain plug access

Choice of Wrinkle Black powder coat or Milled Finish

Includes heavy-duty mounting bracket and stainless steel hardware

Designed to fit OE side skid plates while offering superior strength

In-house engineered by Turner Motorsport for Non-M E9X vehicles

Installation Notes:

Requires an M6 RivNut tool and 10mm drill bit (25/64” bit optional)

Simple installation with included hardware and instructions

Show More Show Less

Select Vehicle

Category

  • Skid Plates

Price

$
$

Special Offers