The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

• 5 layers of wire reinforced silicone
• Perfect fitment with factory airbox
• Compatible with single stage or three stage manifold
• Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our S65 Intake is no exception. Turner Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our engineers use these 3D images of the chassis to design the intake in SolidWorks modeling software. Using a Flow Bench, our Intake is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations and proven to flow better than factory.

Our Turner S65 Carbon Intake is a monster that perfectly compliments the high revving 4.0l V8 engine. The intake benefits start right at the motor; directly connected to the plenum is a full carbon intake tube with a substantially larger cross sectional area with smooth transitions which results in more airflow available to the engine in high demand scenarios. The inlet tube mounts securely to the full carbon heat shield and is mounted in factory airbox locations while retaining the factory cold air induction tract from the hood. Housed inside the heat shield is a behemoth cone filter to ensure proper filtration and maximize airflow. Turner's S65 intake is designed with air flow in mind and features a roaring induction sound. This intake flows like no other, during testing our intake outperformed the flowbench at over 750CFM, a massive improvement over the factory intake.
Benefits:

There is no other intake on the market like our S65 intake which will make your car unique and stand out from the rest of the E9x M3's.
You get a beautiful carbon design with one of the only full carbon fiber heatshields available.
All the flow - the air on demand will make sure your engine always has room to breathe.
Increased throttle response.
Added induction noise for an intoxicating driving experience.
PART DESIGN:

Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment
Hood Inlet Scoop - Directs the flow of cool, ambient air to the heat shield, and directly into the air filter. Seals off with the factory rubber gasket on the lower side of the hood inlet.
Full Carbon Fiber Heat Shield Assembly that utilizes OEM air box mounts and integrates with the factory air intake tract from the hood.
Monstrous 9" cone air filter to maximizes filtration that is able to be serviced/cleaned.
7"x5" Carbon Fiber Inlet Tube providing smooth, direct airflow from the behemoth air filter directly into the plenum.
Fully compatible with the OEM Secondary Air Injection emissions system. Factory hose lock and location.
KIT CONTENTS

Carbon Fiber Heat Shield
Carbon Fiber Intake Tube
Plenum Silicone Coupler
9" Cone Air Filter
Installation Hardware
PRODUCT DEVELOPMENT

Turner S65 Intake System was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

High flow filter replacement to get your engine breathing better than new!

Replace your dirty, restrictive, factory air filter with the ECS Tuning Exact-Fit High Flow Dry Air Filter!

Proper air intake flow will help your engine breathe better, improving power through the power band and improving fuel economy.

Higher flow than stock paper filters, this reusable filter will show an increase in performance immediately. An easy performance modification that is a direct replacement for your OEM filter.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters do allow slightly better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards. This filter will save you money by no longer needing to replace a paper filter.

Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.

Both dry and oiled filters flow better than stock and can be reused.

Key Features:

Direct replacement for the OEM filter

Higher flow than OEM

Dry air filter

Reusable

Only needs cleaning every 50,000 miles under normal highway driving conditions

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

Upgrade your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Silicone CCV Hose today!

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles