BMW Cooling System Parts & Accessories for BMW 3 Series E92 (2007-2013)

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• OEM Wahler Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM VDO Mounting hardware required for both the thermostat and water pump

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

This water pump fits the following BMWs:
2008-20xx E82 128i
2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
2007-2012 E93 328i Convertible
2006-2006 E60 525i, 525xi, 530i, 530xi
2007-2010 E60 528i, 528xi, 528i xDrive
2007-2010 E83 X3 3.0i X3 3.0si
2007-20xx E70 X5 3.0si X5 xDrive30i 
2006-2008 E85 Z4 3.0si
2009-20xx E89 Z4 sDrive30i

Ensure your BMW's optimal performance by replacing a failing water pump with this high-quality replacement. Detectable by symptoms like coolant leaks or whining noises from under the hood, a failing water pump can lead to overheating issues. Don't risk engine damage; keep an eye out for warning signs and promptly replace the water pump. This replacement kit includes one-time-use aluminum mounting bolts for a secure installation.

Product Benefits:

• Prevents coolant leaks
• Eliminates whining noises from the engine
• Avoids overheating issues
• Includes one-time-use aluminum mounting bolts for secure installation