BMW 4 Series F32 (2014+)

Add some M Performance to your interior

Genuine BMW Stainless-Steel Pedals - M Performance
This item fits the following BMW Chassis:
F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I01 i3,I12 i8
 

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

This is a Genuine BMW REAR brake rotor/disc (345x24mm) for all F30, F31 F32 F33 and F34 models with the BMW M Performance brakes. These will also work on the F3X 328iX/428iX with the optional M Sport Brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade (328iX/428iX).

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 328iX/428iX optional brakes (option code S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey 2-piston Brembo calipers. Note that the RWD 328i/428i also used a 345mm rear rotor but the AWD has a different parking brake system. See below for a breakdown of the exact exact models and packages this rotor will work on.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs (with S2NHA M Sport Brake Upgrade):
2012+ F30 BMW 320iX 328iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428iX - Coupe
2014+ F33 BMW 428i 428iX with N26 engine only - Convertible
2014+ F36 BMW 428i 428iX - Gran Coupe
N26 engine: the rear rotors were different on the F33 428 convertible based on which engine the car has. N20 is the ULEV engine; N26 is the SULEV low emissions engine. The emissions sticker under the hood will be labeled ULEV or SULEV.

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G

Enhance your BMW's braking performance with this meticulously engineered OEM brake kit. Sourced directly from BMW, this comprehensive kit equips you with all the necessary components for a complete brake system upgrade. With straightforward installation requiring basic tools, you can transform your car's stopping power over a weekend.

• Upgraded 4 Piston calipers for the front
• 370x30mm Dimpled & Slotted Rotors
• Brake pads and Backing plates included
• Rear features Larger 2 Piston calipers
• 345x24mm Dimpled & Slotted Rotors
• Brake pads and essential hardware provided

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

• M Performance Muffler
• M Performance Decal Kit
• Stick on label and Badge
• Performance BMW software upgrade code
• Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

• Carbon Fiber - Priced Each
• Chrome - Priced Each

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.