The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can be easily activated and programmed using the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

This set of OEM TPMS sensors is the perfect complement to a new set of wheels or to refresh the sensors on your existing wheels. This set includes four OEM VDO sensors with grey valve stems and hardware. A new set of sensors is the best option for new wheels so you won't have to deal with the TPMS fault on your dash/iDrive or pull the sensors off your old wheels

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

13mm = .51"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 13mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe

These Style 189 wheels were originally used on E92 non-M cars with the factory Sport package. The handsome 5-spoke design looks right at home on all E9X cars and even other 3-series such as E46. This is a staggered wheel set - 18x8.0 ET34 in the front and 18x8.5 ET37 in the rear. This is an easy staggered fitment for 3-series cars. On older models such as the E36 and E46 that used higher factory offsets the tire clearnce to the outer fender may be tight. This is an easy fit to E9X cars though.

Style 189 Wheel Set includes:

• 2 x 18x8.0" ET34 Style 189 Star Spoke Wheels (BMW #36116768858)
• 2 x 18x8.5" ET37 Style 189 Star Spoke Wheels (BMW #36116768859)
• set of 4 wheel center caps (BMW #36136783536)

Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail. 

Don't just stick out in a crowd... Create it! These Genuine BMW M Carbon Compound wheels for the F8X M2/M3/M4 are here and they are truly impressive. BMW engineered a hybrid CFRP and aluminum construction for these road wheels, reducing weight by over 15lbs per set when compared to standard GTS wheels. That lower weight helps with cornering, acceleration, and braking. Carbon wheels are the wave of the future but you can get them now!

Wheel and Tire Sizes (suggested):
F: 19x9.5" ET29; 265/35-19
R: 20x10.5" ET42; 285/30-20

The stock BMW wheel cap and wheel bolts can be re-used with these wheels.

Enhance Your BMW's Performance with Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20

• Lightweight titanium construction reduces unsprung weight
• Corrosion-resistant for long-lasting durability
• Conical seat design ensures optimal wheel fitment
• Set of 20 bolts for complete wheel installation

Elevate your BMW's performance with the Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20. Crafted from lightweight titanium, these bolts reduce unsprung weight, enhancing agility and responsiveness. Their corrosion-resistant properties ensure long-lasting durability, even in harsh driving conditions. The conical seat design provides optimal wheel fitment, promoting safety and stability. With a set of 20 bolts included, this kit is perfect for complete wheel installation.