10mm = .39"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.

Longer wheel bolts are required.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

These Style 189 wheels were originally used on E92 non-M cars with the factory Sport package. The handsome 5-spoke design looks right at home on all E9X cars and even other 3-series such as E46. This is a staggered wheel set - 18x8.0 ET34 in the front and 18x8.5 ET37 in the rear. This is an easy staggered fitment for 3-series cars. On older models such as the E36 and E46 that used higher factory offsets the tire clearnce to the outer fender may be tight. This is an easy fit to E9X cars though.

Style 189 Wheel Set includes:

• 2 x 18x8.0" ET34 Style 189 Star Spoke Wheels (BMW #36116768858)
• 2 x 18x8.5" ET37 Style 189 Star Spoke Wheels (BMW #36116768859)
• set of 4 wheel center caps (BMW #36136783536)

Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail. 

These are the factory BMW wheels that were optional on the E85 Z4 3.0i Roadster. Their sizing and offset makes them a direct fit to the E46 and other models. What makes these wheels stand out is their curved concave dish that makes them look larger than their 18" diameter. This is a staggered set in the factory sizes and offsets - 18x8.0" and 18x8.5". These are a direct fit upgrade for all E46 models and will also look great on other chassis as well (see fitment notes).

Z4 Ellipsoid Wheel Set includes -
2 x 18x8.0" ET47 Ellipsoid Style 107 front wheels (BMW #36116758192)
2 x 18x8.5" ET47 Ellipsoid Style 107 rear wheels (BMW #36116758193)
4 x BMW wheel center caps (BMW #36136783536)

These are relatively high offset wheels so wheel spacers will be required on other models. Enter your car info for more specific info. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail.  

Don't just stick out in a crowd... Create it! These Genuine BMW M Carbon Compound wheels for the F8X M2/M3/M4 are here and they are truly impressive. BMW engineered a hybrid CFRP and aluminum construction for these road wheels, reducing weight by over 15lbs per set when compared to standard GTS wheels. That lower weight helps with cornering, acceleration, and braking. Carbon wheels are the wave of the future but you can get them now!

Wheel and Tire Sizes (suggested):
F: 19x9.5" ET29; 265/35-19
R: 20x10.5" ET42; 285/30-20

The stock BMW wheel cap and wheel bolts can be re-used with these wheels.

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 35mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.