BMW E36 (1992-1998) M3

Whether you are looking to replace your old stock wheel lug bolts, or need longer bolts to accommodate wheel spacers or for other special considerations, our black wheel bolts are probably what you need. They are high grade (10.9) and feature a durable black finish. These are 12 x 1.5mm bolts with a 17mm head -- as used on most BMWs. Replaces BMW part numbers 36136781150 and 36131095390.

The standard length wheel bolts are for stock BMWs, and the longer length bolts are listed below (select your length with the drop down box) with the size / thickness wheel spacers they are suitable for. Longer wheel bolts are only 20 cents more than standard, and are available in lengths to work with spacers up to 20mm thick. Please select your desired length below (default is the standard/stock BMW length bolt).

Price is for a set of 10 bolts.

These black wheel bolts fit the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1977-1983 E21 BMW 320i 320/5 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi L6 M6
2004-2011 E63 E64 BMW 645ci 650i M6
1977-1987 E23 BMW 728i 733i 735i 745i L7
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2015 E89 BMW Z4 sDrive28i sDrive30i sDrive35i sDrive35is
2000-2003 E52 BMW Z8 Roadster
2002-6/2006 R50 MINI MINI Cooper
2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-6/2006 R53 MINI MINI Cooper S

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

• Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
• Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
• Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

• Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
• Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
• Bearing inserts: CNC machined 303 stainless steel.
• Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware). 

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

*Note: these links will not work with factory or non-adjustable Eibach sway bars.

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Eliminate the grimy, leaky, factory BMW power steering expansion tank with a beautiful billet aluminum reservoir.
Upgraded for thermal capacity, performance and extended rack life!

Our Turner triple baffled reservoir allows you to fix the downfalls of the factory BMW power steering expansion tank without losing that factory feel. The upgraded Turner reservoir has internal baffling to prevent cavitation and air pocket to make sure your rack is getting the supply of power steering. The constant flow of power steering keeps your rack cooled, lubricated and functioning properly. Extend the life of your rack and seals for years to come with increased performance and drivability. Can be used in motorsport, off-roading and daily use applications for a truly unique and universal upgrade.

Eliminates the grimy, leaky, factory BMW power steering expansion tank with a beautiful aluminum component. Increased factory power steering performance in both feel and cooling. Factory-fit with both hoses and bracketry. Additional cooling capacity will increase fluid thermal carrying capacity before overheating. Adapters where necessary to ensure reservoir will work with to-be-designed AN hose kits as well as factory hoses. Add-on, in-line valves to allow for easy flushing of power steering fluid.

Features:

Billet aluminum construction

Eliminates the leaky factory BMW reservoir and replaces it with a billet aluminum component.

Upgraded 0.45L capacity for better cooling and reduced overflow.

Internal baffles to remove bubbles caused by pump cavitation

Compatible with factory hoses and factory bracket.

Removeable Internal mesh filter

No more slow starts! Does your car feel old? Age may not be the issue at all, your throttle cable bushings are mostly likely worn out and your car has lost its pep!

Your throttle cable is the main connection you have from the gas pedal to the throttle body. Do you have hesitation or delayed pedal response? Think of when you are sitting at a stop light or making a turn into a flow of traffic, you may not realize it but if you haven't replaced your throttle cable and bushings this will require you to apply pressure to the gas pedal before getting feedback which can cause slow starts at stop lights and put you in danger when merging in traffic. These are not issues with old cars, they are issues related to your throttle response!

Symptoms to look for: lackluster/sloppy throttle actuation, deformed throttle cable appearance, and bushing condition. Your throttle cable bushings can be soft, cracked or even disintegrated by now.

Upgrade from failed rubber to new billet aluminum bushings for quick gas pedal response and a better engagement with your car.