Select Vehicle
BMW
Mini
This product was last offered at the strikethrough price on
06-03-2026
This product was last offered at the strikethrough price on
04-17-2026
This top-end gasket set covers the cylinder head on the S54 engine used in the E46 M3, Z3 M Roadster/M Coupe, and E85/E86 Z4 M Roadster, M Coupe. If you're pulling the head, intake manifold, or doing any other upper end engine work this set can be a time and money saver. This set includes all of the commonly replaced gaskets, seals, and o-rings when overhauling the head. It's also a useful kit to have and dip into any time you're doing upper end engine work. Not having a critical seal or gasket on hand can ruin your work and this gasket set can prevent that from happening. This Victor Reinz set includes the head gasket.
BMW #QtyDescription
071199035461left timing rail upper bolt seal
071199630724VAN0S oil line seal ring
071199631292crankcase vent banjo bolt seals
071199632522screw plug seal ring
071199633421right upper timing rail bolt seal ring
071199634181timing chain tensioner seal ring
111214373952valve cover stud grommet seal
1112783097213valve cover stud grommet seal
111278312716spark plug hole profile gasket
111278320341main valve cover gasket
111278370241oil fill cap seal ring
111278370251crankcaske oil separator seal ring
111417367581VAN0S-camshaft plate o-ring
111578309661crankcase oil separator o-ring, large
111578321191crankcase oil separator plug o-ring
113113173181inside o-ring for internal VAN0S regulating valve
113490644572valve stem seal, 2 sets = 24 valves
113678319381VAN0S unit profile gasket
114113060821outside o-ring for internal VAN0S regulating valve
115313184021thermostat-to-water pump o-ring
115378307083coolant pipe o-ring gasket
115378307092thermostat housing connector o-ring
116114076951intake bellows o-ring profile gasket
116178301041intake bellows-to-airbox gasket
116278306676exhaust manifold port gasket
117275052591air pump valve profile gasket
121417483982camshaft position sensor o-ring
135478314836throttle body o-ring
136414374746fuel injector o-ring, upper
136478306116fuel injector o-ring, lower
111278359181head gasket
This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe
52mm Prosport Electrical Boost Gauge - Clear Lens/White LED is an essential tool for any supercharged or turbocharged vehicle. This precision gauge allows drivers to monitor boost levels with accuracy and style, ensuring peak performance and optimal engine tuning.
There are many benefits to installing harnesses in your E46 -
It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.
The Schroth Quick Fit Pro tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit Pro harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.
Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Quick Fit harnesses are TUV approved and meet US DOT seatbelt regulations.
Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).
Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.
QuickFit Pro Harness Summary:
When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2001 - 2006 E46 M3
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Revamp your BMW or MINI with the Strap Style Tow Hook - Red. This vibrant red tow hook adds a touch of sportiness and functionality to your vehicle. Crafted with durability in mind, it provides a reliable towing solution whenever needed. Whether for track days or emergency situations, this tow hook is a must-have accessory. Enjoy the following benefits with this stylish red tow hook:
This product was last offered at the strikethrough price on
02-19-2026
This product was last offered at the strikethrough price on
06-17-2026
This product was last offered at the strikethrough price on
05-07-2026
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 20.95 |
| Profile: | Concave |
This product was last offered at the strikethrough price on
05-07-2026
Enhance the performance and sound of your BMW E46 M3 with the BMW E46 M3 Megan Axle Back Exhaust. Crafted to deliver both style and functionality, this exhaust system offers an upgraded driving experience with its superior design and construction. Ideal for enthusiasts looking to optimize their vehicle's exhaust flow and enhance its overall aesthetics, the Megan Axle Back Exhaust promises a blend of performance, quality, and style.
Upgrade your BMW E46 M3 with the Megan Axle Back Exhaust to enjoy a noticeable improvement in both performance and aesthetics.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with Hotchkis Performance Sway Bars.
Performance sway bars allow you to take corners aggressively while still keeping the wheels firmly planted and reducing body roll, all without reducing overall ride quality. Hotchkis sway bars feature powder coated tubular steel construction for maximum durability and stiffness. Every kit includes the essential components needed for an easy installation and to ensure you get the most from your sway bars.
Features:
Specs: 1-3/16 in. (30mm) Tubular Front Bar 3 Way Adjustable. Rate Increase vs. Stock +11% +28% +49%.
Fits the following BMWs:
2001-2006 E46 BMW M3