Select Vehicle
BMW
Mini
Category
- Drivetrain
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-27-2026
Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.
In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.
The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.
For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.
Features:
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
For our Grand-Am Cup E46 M3s we wanted a fully solid differential mount setup. The advantages of a fully-solid aluminum set is that they last forever, quickens response in the suspension, and frees up horsepower to the wheels. These fully solid aluminum diff mounts are CNC machined and lightened for a direct replacement of the original rubber pieces.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
04-16-2026
This product was last offered at the strikethrough price on
04-16-2026
Looking to upgrade your stock clutch to something a little more beefy? The performance clutch kits from DKM are a great option to help get power to the wheels without breaking the bank. Working with Competition Clutch, DKM clutch discs and plates are constructed using quality materials to obtain greater strength and heat tolerance than OE clutches, helping to prevent wear and tear while still giving you increased toque capacity for quicker shifts and more power management.
Stage 2 clutch kits are best for vehicles that may require an up-to 80% increase in torque capacity for heavily modified vehicles that will see a significant amount of track time. The clutch disc is improved, composed of a woven brass and organic material with alloy backings for better engagements at higher loads and extended clutch life.
This Stage 2 performance clutch kit includes the following items:
Fits the Following Vehicles:
2000-2006 E46 BMW M3 3.2L
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Single piece 6061 construction, optimized cooling, provisions for temp sensor and external cooler!
Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing our diff cover can handle anything you throw at it. Not only is it an absolute masterpiece to look at but this billet diff cover checks all the boxes for features needed. Reinforced mounting ears for strength and stability, never again will you break an ear off your diff cover like the factory units are known to do. Each ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. Internal fins are strategically placed serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.
All of the OEM features were retained along with the upgrades. The mounting surface was designed to be compatible with both the OEM gasket or RTV of your choosing, some people don't trust the gaskets and we get it. Factory bushing geometry allows you to use any E46 diff busing including rubber, poly, and even solid mounts. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now also be used for expanding to an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.
Why the upgrade?
Upgrading to our Billet Differential cover gives you the strength you need to push your car to its limits. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include increased capacity, improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, all while looking good in the process.
Key Benefits:
Reinforced mounting ears for strength and stability - never again will you break an ear off during an aggressive drive or track event
Increased capacity
Sight glass for checking fluid level without removing fill/drain plug
External fins on the casing for maximum cooling and consistent fluid temps
Internal cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:
Fits large case 210/215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features including the use of the OEM gasket
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Easy access to sensors and drain/fill plug
Retains OEM speed sensor and wire mount location
Product development:
Our Reinforced Billet Diff Cover was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-30-2026
This product was last offered at the strikethrough price on
05-30-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
If allowed in the rules these solid aluminum engine and transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. We originally developed these mounts for E36 and E46 World Challenge racing but they also work perfect in BMW Modified and SCCA club racing and SpecE46 (SE46). These are machined from solid aluminum and have zero deflection. The engine torque will cause a rubber or urethane mount to flex or deflect. The stiffer the material the less movement there is and the more torque is passed through the driveline (instead of being wasted winding up the mount). At the transmission end the flex-free solid mounts will give smoother, crisper shifts since the transmission is no longer dancing on the pliable mount. This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of motor and transmission mounts you will ever need. We have designed these mounts so the engine is 5mm lower and the transmission is 1mm lower than the factory mounts. This helps lower the center of gravity for better balance and handling. We very strongly recommend using the transmission and engine mounts together as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mouting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used. This kit fits the E36, E46, Z3, and Z4 6 cylinder models listed below, including M3 models.
This product was last offered at the strikethrough price on
08-31-2026
Please note: This filler does NOT include the adapter set to allow the hose to reach the transmission fluid pan. The adapter set part number is T29101662.
Includes:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
The Meyle Adapter Set for the Transmission Fluid Filler Pump is designed for a wide range of Euro and domestic vehicles. This set allows you to maximize the utility of Meyle's premium-built pump across various makes in your driveway. Each adapter easily attaches to the filler's coupler, ensuring quick and seamless transitions between adapters. The set comes in a blow-molded case, providing convenient and mess-free storage.
Includes:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.
For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.
WHY UPGRADE?
Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.
Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.
FEATURES & BENEFITS
Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN
6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:
Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
MAGNETIC FENDER COVER:
Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.
Features:
Dimensions:
TELESCOPING LED MIRROR:
You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.
Features:
TELESCOPING MAGNET:
This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.
MAGNETIC PARTS TRAYS:
Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.
Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.
A simple, effective solution to a common problem.
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
One of the most satisfying upgrades you can make to your BMW is to its factory shifter mechanism. By reducing the shifter's throw, you can give your manual transmission BMW a sportier, more precise feel. However, with so many different "short shift kits" out there, how can you be sure you're making the right decision? With the introduction of the Rogue Engineering OCTANE short shift kit, the choice is now crystal clear!
Rogue Engineering refuses to compromise with "lever substitution" as a method of short shift kit development. Rather than using actual test vehicles for their products, some companies actually dig through OEM factory parts diagrams to determine which factory levers can be substituted with others. This "lever substitution" method of introducing product is unacceptable. These shift kits have been developed and perfected through years of experience in proven short shifter technology, by Co-Founder, Ben Liaw. As longtime BMW enthusiasts know, Ben was single-handedly responsible for introducing and developing the idea of affordable, BMW factory-like, short shift kits for late model BMWs (BL/SS for those young enough to remember!).
Rogue Engineering idea of a short shift kit is not substituting levers in place of factory ones just because "they fit". Throughout the 80s until recently, BMW was notorious for using only a few specific shifter levers for their manual transmission vehicles. For other companies, making just a few "replacement levers" and offering them in place of those factory part numbers was an easy way of calling it a short shift kit. Unfortunately, for those companies, BMW started using many different part numbers making it more difficult to just "swap in a lever".
Rogue Engineering only develops it's short shift kit with test vehicles in their facility, testing numerous prototypes, offering others to test it before settling on its final design. They feel that this old school, real world testing is the best way when modifying OEM ergonomic, sensory-based controls.
The Powerflex Black Series Shifter Arm Rear Bushing for BMW 3 Series, 5 Series, and Z Series is a high-performance upgrade, engineered for those seeking superior precision and durability in their vehicle’s shifting mechanism. Part of the Powerflex Black Series, this bushing is designed specifically for track and high-performance use, delivering exceptional stability under extreme conditions.
This rear shifter arm bushing upgrade is perfect for drivers who want the best in control, performance, and long-term durability, making it an essential component for serious driving and racing applications.
Experience unparalleled performance with Red Line CV-2 Grease, expertly crafted to endure extreme temperatures and pressures found in high-performance wheel bearings and CV-joints. This premium grease surpasses both conventional and synthetic options with its exceptional high-temperature stability, superior extreme-pressure protection, and water resistance. Operating effectively in temperatures spanning from -100°F to 500°F, it offers outstanding oxidation and corrosion resistance, minimal evaporation and oil separation, and has minimal impact on rubber seals. Expect a remarkable 200% to 800% increase in bearing life due to the exceptional extreme-pressure performance and synthetic oil fluidity. Its red moly compound outshines black moly disulfide lubricants, ensuring superior lubrication.
Red Line CV-2 Grease finds application not only in automotive settings but also in industrial environments. It excels in high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and other scenarios prone to fretting wear and corrosion. Its consistency and extreme-pressure performance endure high-temperature and high-shear conditions, extending the performance life of lubricated components. Despite darkening after high-temperature use, its efficacy remains unaffected. While compatible with some petroleum-based greases, it's recommended to clean out old grease thoroughly for optimal lubrication performance and to avoid grease incompatibility.
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a 1-piece Chromoly conversion for the BMW E46 (6-Speed Manual Transmission ONLY, will not fit SMG).
The shaft is 3" x .083" DOM tube with billet aluminum plates to convert the small bolt pattern on the factory transmission to use larger 1310 U-Joint and a 108mm CV to mount to the differential, which will eliminate any possible pinion angle issues. This shaft weighs 25 pounds and since there is no hanger bearing, it will make the car seem more athletic and give it a smoother power transfer.
Unlike other aftermarket shafts for BMW's this shaft features a slider system that will let the shaft move in and out during racing and chassis flex. This shaft is now being balanced on a new 9500RPM balancer to ensure a perfectly balanced shaft. Comes complete with precision machined front and rear conversion plates and all necessary hardware for installation.
The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.
This part fits the following BMWs:
2001 - 2006 E46 M3
Please note: The Meyle transmission filler tool is sold separately. The filler tool part number is T29068522.
Includes:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This kit includes Turner Motorsport solid aluminum differential race mounts pre installed in the differential cover for a quick install. These mounts where developed by Turner Motorsport for their Grand-Am Cup E46 M3 race cars, the advantages of solid aluminum mounts is increased suspension & drivetrain response, less drivetrain loss resulting in more wheel horsepower, and longevity - they effectively last forever. These CNC-machined mounts are a direct replacement for the stock rubber pieces, and have been lightened to remove excess weight.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
