Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a stunning matte titanium finish and a slant-cut, single-wall outlet for a sleek appearance. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Elegant matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a refined look
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

Want a race-spec rear shock mount but with the comfort of a factory bushing? This ECS rear shock mount combines the precision and articulation of a spherical bearing with the isolation of urethane bushings. The stainless monoball bearing is lined with PTFE lubricant and suspended in 80A urethane and housed in a hard anodized 6061-T6 aluminum mount. The spherical bearing is a better design than most rear shock mounts because it allows the shock to move and tilt without side-loading the shock shaft (which leads to premature failure of the shock). Most Genuine BMW and aftermarket shock mounts are not designed for shock angles and the stress that track or performance driving will put on the shock shaft. The ECS shock mount is properly designed to handle these loads. The internal bearing is also replaceable - it will be years before you have to replace the entire mount. The ECS mount is fully encapsulated to prevent the common shock mount failure of the stock mount design.

ECS RSM features:

• Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
• 80A polyurethane isolation bushings for NVH control
• Accommodates 10mm, 12mm, or 14mm damper shafts
• Fully constrained shaft mount makes RSM blow out impossible
• Hard anodized 6061-T6 construction
• Fully rebuildable design

* - the RSM comes with the BMW standard 10mm shock shaft bushings. 12mm is used on some performance shocks and 14mm is used on some true motorsport rear shocks.

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

• Key Features:
• Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
• Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
• Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
• Serviceable: Easily removable baffle plates and drain plug for cleaning.
• Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
• Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).

BMW E30 Wheel Stud Conversion Kit - Full Set

Transform your BMW E30 with the BMW E30 Wheel Stud Conversion Kit - Full Set. This comprehensive conversion kit is designed to enhance the performance and convenience of your vehicle. With high-quality wheel studs included, it ensures secure wheel mounting for added safety on the road. Upgrade your BMW E30 with this kit and enjoy the following benefits:

• Improved wheel mounting security
• Easier wheel installation and removal
• Prevents stripped lug bolts
• Durable construction for long-lasting performance

Black Chrome UNIVERSAL Swivel Exhaust Tip - 4.0" offers both style and adjustability with its innovative design. This exhaust tip features a unique swivel collar that allows for precise alignment and perfect fitment. The tip can be adjusted to any direction, and once set, it remains securely in place by tightening the hex bolt to 14 ft-lbs (19 Nm).

• Precision Laser Etched Logo: Each tip includes a laser-etched logo for a premium look.
• Durable Construction: Built with chrome-plated nuts, a 304SS cap screw, clamp, insert ring, and exhaust tip for longevity.
• Stylish Design: Features a slant cut, double-wall construction, and rolled edge for a striking appearance.
• Versatile Fitment: Available in a 4.0" outlet and finished in a sleek black chrome.
• Dimensions:
  • Inlet Size: 3.0"
  • Overall Length: 7.0" (6.0" Tip + 1.0" Clamping Surface)
  • Outlet Size: 4.0"
  • Outlet Style: Double Wall, Rolled Edge, Slant Cut

Modification may be required for proper fitment.

BMW E3X Wheel Stud Conversion Kit - Half set

Enhance your BMW E3X's performance and safety with the BMW E3X Wheel Stud Conversion Kit - Half set. This kit allows for easy conversion from lug bolts to wheel studs, providing a more secure wheel mounting solution. Engineered for durability and reliability, it ensures optimal wheel alignment and reduces the risk of stud breakage. Upgrade your BMW E3X with this premium wheel stud conversion kit today.

• Easy conversion from lug bolts to wheel studs
• Provides a more secure wheel mounting solution
• Ensures optimal wheel alignment
• Reduces the risk of stud breakage for improved safety

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence of this oil mist in the intake charge may even increase the risk of engine-damaging detonation. 

With forced induction, track use, and/or extended high RPM usage, these symptoms increase as the factory PCV system is overwhelmed, and a catch can becomes a must for your E46 M3. This kit is a direct fit making this an easy reversal if desired as well as maintaining a clean appearance by utilizing the open "smuggler's compartment" on the passenger side of the engine bay.

ECS engineers developed a catch can that utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The ECS Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation.  

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance. Having a kit designed specifically for your E46 M3 makes for a clean looking setup that any skill level mechanic can install. 

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

*Click here for installation instructions*

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs
E46 M3 2001-2006

ECS Titanium Wheel Bolts

Elevate your vehicle's performance with ECS Titanium Wheel Bolts, designed for weight savings and exceptional quality. These bolts, CNC'd from annealed titanium alloy, are 50% lighter than steel bolts of the same size, reducing rotational mass for improved performance.

Tested to class 10.9 fastener proof load requirements, these bolts exhibit exceptional durability without any signs of fatigue or failure. Featuring specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, a 17mm head, and a conical seat, they ensure precise fitting and reliable performance.

Benefits:

• 50% lighter than equivalent steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for exceptional durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• High-quality, rust-resistant construction
• Precision fitment with specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, and a 17mm head

Prior to installation, ensure thorough cleaning of hub threads to remove zinc traces from previous wheel bolts to prevent fatigue and cracking of the titanium alloy.

Increased aesthetics to turn heads and set yourself apart from the crow. Featuring lightweight carbon fiber weave with a high-gloss, uv protected finish.

Drop weight and increase the style rating on your E46 M3 with new light-weight carbon fiber fenders. Includes mounting locations for both trim and grills. Packaged securely with foam on the edges to ensure your fenders arrive glossy and problem free!

BMW S54 ECS Exact-fit Waterpipe Connecting Line

Enhance your vehicle’s performance with the BMW S54 ECS Exact-fit Waterpipe Connecting Line, crafted for precision and durability.

• Precision Engineering: Engineered to exact specifications for a perfect fit.
• Enhanced Cooling: Improves coolant flow for better engine temperature regulation.
• Durable Construction: Made from high-quality materials to withstand engine heat and pressure.
• Direct Replacement: Installs seamlessly without modifications for hassle-free maintenance.

Upgrade your BMW S54 engine with confidence using the ECS Exact-fit Waterpipe Connecting Line, delivering reliability and performance you can depend on.

ECS Tuning introduces the solution to your engine bay aesthetic concerns with the Billet Aluminum Oil Dipstick. Say goodbye to the bright red plastic eyesore and elevate your under-the-hood style effortlessly. Designed to OE specifications, this dipstick boasts an easy-to-read fill line and is available in three stunning finishes: black, polished, or clear anodized.

• Billet aluminum construction for enhanced durability
• Easy-to-read fill line for convenient oil level checks
• Available in three finishes: black, polished, or clear anodized
• OE specifications ensure a perfect fit
• Improved ease of insertion compared to factory ribbon dipstick
• Aesthetic enhancement for your engine bay

Upgrade your engine bay's appearance and functionality with the ECS Tuning Billet Aluminum Oil Dipstick. No more struggles reinstalling your dipstick; enjoy a sleek and high-performing addition to your vehicle.

Struggling with corroded brake rotor set screws on your BMW? ECS Tuning has the perfect solution. Introducing our stainless steel rotor set screws that won't seize up, preventing the need for drilling out failed screws. The stainless steel composition ensures easy removal, offering years of trouble-free use compared to the OEM part.

• Stainless steel construction prevents corrosion
• Easy removal for years of trouble-free use
• Eliminates the risk of seized set screws
• Custom-designed for BMW vehicles
• Avoids the need for drilling out failed screws
• Check fitment information for your specific BMW model

Transform Your BMW's Exhaust System with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four

• Elevates the appearance of your BMW's exhaust system
• Crafted from durable titanium for long-lasting performance
• Features a stylish burnt finish for a unique look
• Comes in a set of four for a complete upgrade

Upgrade the look of your BMW's exhaust system with the ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four. Made from high-quality titanium, these exhaust tips are built to last and provide a touch of elegance to your vehicle. The burnt finish adds a distinct visual appeal, making your BMW stand out from the crowd. With four tips included in the set, you can achieve a comprehensive upgrade for your exhaust system.

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips boast a sleek, matte titanium finish and a slant-cut, single-wall outlet that delivers a stunning visual appeal. Engineered for durability, they feature chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Stunning matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a sleek appearance
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

Upgrade your toolkit with the 22mm Thin Wrench.

Engineered for precision and versatility, this thin wrench is a must-have for any mechanic or DIY enthusiast. Its slim design allows for easy access to tight spaces, while its durable construction ensures reliable performance. With a comfortable grip and corrosion-resistant finish, this wrench is perfect for a wide range of automotive and household tasks.

• Slim design for easy access to tight spaces
• Durable construction for reliable performance
• Comfortable grip for extended use
• Corrosion-resistant finish for longevity