BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:555428
Part#: LMOCK3KT
In Stock
$ 115.99 USD
Free Shipping
$ 115.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 6 Liters of Synthoil Race Tech GT1 10w-60
  • Mann Oil Filter
  • Oil Drain Plug & Washer

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport recommends Synthoil Race Tech GT1 10w-60 for your S54 engine. Race Tech is a modern high performance engine oil formulated for engines that experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exceptional lubrication and engine wear protection. This oil provides immediate lubrication upon cold start, offering significantly improved protection compared to other oils. Liqui Moly Race Tech GT1 10w-60 will keep your S54 pulling hard and running smooth on your commute home from work, your touge run through the valley, and while you are trying to get your best times on the track.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23714966
Part#: STUDCONVKITKT
Back Ordered
Sale - Save 8% $ 179.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.59 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 179.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.59 USD
Free Shipping on orders $49 and up

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

  • Simplifies spacer usage with a single application designed for various spacer widths
  • Wheel studs act as a wheel hanger, easing wheel installation
  • Reduces constant wheel bolt removal, minimizing wear on wheel hubs
  • Facilitates quick and easy tire changes as the studs stay in the hub
  • Recommended torque of 15Nm with thread-locking compound during installation
  • Compatible with spacers up to 20mm in size
Show More Show Less

E46 Xenon Headlight Lens Kit
For vehicles with production date up to 03/2003
Packaged by Turner - Corporate Logo
T#:6196918
Part#: 6312838219192TKT
In Stock
$ 190.99

This product was last offered at the strikethrough price on
05-26-2026

$ 188.99 USD
Free Shipping
$ 188.99 USD
Free Shipping
Includes left and right lens and lens gaskets. Are your headlights yellowed, faded, cracked, or fogging? Exposure to the elements, road debris, UV damage, and heat can take a toll on your plastic headlight lenses. Replacement is simple, and the result can immediately transform the appearance of your vehicle.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:30164593
Part#: 11120034108KT3
In Stock
Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099850
Part#: 11142247867TKT
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Protect your BMW engine and drivetrain with the OE Rear Main/Crankshaft Seal Kit, a critical upgrade for leak-free performance and longevity.

Packaged by Turner - Corporate Logo
T#:555452
Part#: LMOCK27KT
In Stock
$ 114.99

This product was last offered at the strikethrough price on
05-15-2026

$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555793
Part#: S54TWSKT
In Stock
$ 147.19 USD
Free Shipping
$ 147.19 USD
Free Shipping

When changing your oil, you want to make sure you are using the best. Turner Motorsport now offers our premium Castrol TWS Oil service kits to ensure you are getting the best products available for your routine oil services. Everything included has been specifically picked to ensure high quality and outstanding wear protection. 

One of the most popular engine oil choices on the market today, Castrol Edge Professional TWS 10-60 engine oil is premium engine oil approved by BMW for use in a wide variety of engines such as the M30, S54, S85, and many more. In fact, this oil is the same oil that BMW uses for their performance engines from the factory. Thanks to its premium blend of synthetic oil and additives, this oil continues to provide protection under even the harshest conditions and is perfect for both street cars and cars that see occasional track use.

Specifications:

  • SAE-10w60
  • ACEA A3/B4
  • API SN/CF
  • VW 501 01/505 00
  • Exclusive Approval for BMW M-Models

Included in this Kit:

  • Castrol TWS 10w-60 Premium Oil - 6 Liters
  • Engine Oil Drain Plug & Washer
  • Premium Oil Filter
Show More Show Less

APEX Wheels - Corporate Logo
T#:637384
Part#: APEXM12STDKIT5HX
Ships in 3 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:15644278
Part#: 114278337690KT
In Stock
$ 102.99 USD
Free Shipping on orders $49 and up
The Lubro-Moly Synthoil Race Tech GT1 10W-60 is modern, fully synthetic, high performance engine oil formulated for use in four-stroke engines under extreme load. The combination of synthetic base oils and modern additive technology satisfies the requirements of the latest engine designs. This oil optimizes engine performance. It provides immediate lubrication during cold starting and significantly improved wear protection.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401664
Part#: VSK4KT2
In Stock
$ 143.84 USD
Free Shipping
$ 143.84 USD
Free Shipping

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

Includes

  • Shim set 
  • Installation tool #83300493743
  • 16 Blade Feeler gauge set 

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less
Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Starting at $ 455.97 USD
Free Shipping
Starting at $ 455.97 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less


Packaged by Turner - Corporate Logo
T#:22130457
Part#: OILCHNGCASTROLKT
In Stock at Vendor
$ 144.99 USD
Free Shipping on orders $49 and up
For your BMW E46, Z3, or Z4 Ultimate Driving Machine to maintain peak performance, Turner Motorsport advises conducting oil changes every 5,000 to 10,000 miles, adjusting the frequency based on your driving habits. Regular inspections are crucial for prolonging your vehicle's lifespan and ensuring it operates smoothly. Turner Motorsport is your trusted partner in preserving your car's excellence. Explore the "Kit Contents" tab to view the list of components included. Interested in crafting your own service kit? Turner Motorsport provides a comprehensive selection of filters and oils from various reputable brands, available right here on our website. We've got everything you need to customize your maintenance package.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
In Stock
Sale - Save 23% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Sale - Save 23%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24344782
Part#: E46M3RWBKT
In Stock
Sale - Save 5% $ 278.99

This product was last offered at the strikethrough price on
04-20-2026

$ 266.31 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 278.99

This product was last offered at the strikethrough price on
04-20-2026

$ 266.31 USD
Free Shipping on orders $49 and up
A failing wheel bearing may translate into excessive vibration through the steering wheel, a noticeable hum while driving at speed, and/or a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing. This kit includes all the components commonly replaced when servicing one of the rear wheel bearings. Included: Genuine BMW Wheel Hub OEM Wheel Bearing OEM Axle Nut Genuine BMW Wheel Bearing Circlip
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less
Packaged by Turner - Corporate Logo
T#:388324
Part#: TEN4649SK2
In Stock
Sale - Save 9% $ 97.14

This product was last offered at the strikethrough price on
03-04-2026

$ 88.02 USD
Free Shipping
Sale - Save 9%
$ 97.14

This product was last offered at the strikethrough price on
03-04-2026

$ 88.02 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken) exhaust manifold studs on your M52tu-family engine's head.

This item fits the following BMWs:
1999-2000  E46 BMW  323i 323ci 328i 328ci
1999-2000  E39 BMW  528i
1999-2000  Z3 BMW  Z3 2.3 Z3 2.8
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41289771
Part#: 36116750007T
Ships on Aug 31, 2026
$ 231.99 USD
Free Shipping on orders $49 and up
$ 231.99 USD
Free Shipping on orders $49 and up

Includes Genuine BMW steel wheel with mounted and balanced Kumho tire

-Wheel -17x3.5" ET30

-Tire - 135/80/17

Packaged by Turner - Corporate Logo
T#:555435
Part#: LMOCK6KT
In Stock
$ 106.99 USD
Free Shipping
$ 106.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Oil Filter Kit
  • Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5498497
Part#: 11617544806DKT
In Stock
Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD
Free Shipping
Sale - Save 25%
$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD
Free Shipping
A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware
Show More Show Less

Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
ZEP - Corporate Logo
T#:411
Part#: 0382
Ships in 10 Business Days
$ 42.99 USD
Free Shipping on orders $49 and up
ZEP-O-SHINE is a premium grade concentrated car wash. It is a highly concentrated product that literally "pries-off" dirt. Sensationally fast and economical too, it contains a special polymer wax which leaves the finish with that brighter, newer look. After the surface is dry, rubbing gently with a soft cloth produces an even glossier sheen. ZEP-O-SHINE washed finishes are more weatherproof. Phosphate free!

Directions:
Dilute 1 to 3 ounces ZEP-O-SHINE per gallon of water. Place the proper amount of ZEP-O-SHINE in a handy container, add the water in a strong stream to produce suds. Wash the car as usual, dry with a soft cloth rubbing gently to a rich glossy sheen.

BIODEGRADABLE: All detergents used in the manufacture of this product are biodegradable.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555447
Part#: LMOCK21KT
In Stock
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Mann Engine Oil Filter
  • Febi Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:583538
Part#: M54PISKT
In Stock
Sale - Save 20% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping
Sale - Save 20%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24212302
Part#: 26112226527TKT
In Stock
Sale - Save 30% $ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Comes with a flex disc (giubo), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

Packaged by Turner - Corporate Logo
T#:5416751
Part#: 21526773670TMSKT
In Stock
Sale - Save 7% $ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.49 USD
Free Shipping
Sale - Save 7%
$ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.49 USD
Free Shipping
Includes master and slave cylinder, hardware and lines including the Exact-Fit Stainless Steel Clutch Line! A leaking clutch cylinder often feels like a failing clutch or a problematic transmission, this kit includes everything needed to not only replace but upgrade your clutch hydraulic system!
Show More Show Less

APEX ARC-8 17x9" ET30 Anthracite Concave Wheel 16.55lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:180797
Part#: ARC8179ET30AN
Ships in 4 Business Days
$ 339.00 USD
$ 339.00 USD
17x9" ET30 Anthracite Concave APEX ARC-8 Wheel 16.55lbs
Wheel Specs
Fitment:Front or Rear
Size:17x9.0"
Offset (mm):30
Weight (lbs):16.55
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
Ships in 7 Business Days
$ 222.04

This product was last offered at the strikethrough price on
05-03-2026

$ 221.45 USD
Free Shipping
$ 221.45 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:401619
Part#: 16116762417KT1
In Stock
Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping
Sale - Save 18%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Show More Show Less
APEX ARC-8 17x9" ET42 Anthracite Wheel 17.2lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:180801
Part#: ARC8179ET42AN
Ships in 10 Business Days
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping
17x9" ET42 Anthracite APEX ARC-8 Wheel 17.2lbs
Wheel Specs
Fitment:Front or Rear
Size:17x9.0"
Offset (mm):42
Weight (lbs):17.2
Profile:Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. This is an excellent wheel for SpecE46 (SE46). The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555724
Part#: PBTSRKT27
In Stock
Sale - Save 8% $ 250.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.91 USD
Free Shipping
Sale - Save 8%
$ 250.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.91 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:582218
Part#: 83300493743
In Stock
$ 247.52 USD
Free Shipping
$ 247.52 USD
Free Shipping
BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:48
Part#: E46M3HEADERKIT
Ships in 8 Business Days
$ 169.99

This product was last offered at the strikethrough price on
03-04-2026

$ 164.99 USD
Free Shipping
$ 164.99 USD
Free Shipping
Includes longer studs for aftermarket headers! If you're swapping in new headers on your E46 M3 this kit of gaskets and hardware is the perfect finishing touch! Everyone knows that headers are one of the best performance gains you can do on the E46 M3 and we sell a lot of them. But new gaskets are required if you want a leak-free install and to avoid re-doing the work. This kit fits all E46 M3 (LHD only). Includes: 6 x 11627830667, manifold to head gaskets 18 x 11721437202, exhaust manifold nut 18 x 11121744057, exhaust manifold stud 2 x 11627830668, manifold to section 1 crush rings 1 x 11727505259, air pump valve gasket This item fits the following BMWs: 2001-2006 E46 BMW M3
Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677507
Part#: 11531436410-KT
Ships on Aug 19, 2026
Sale - Save 10% $ 285.99

This product was last offered at the strikethrough price on
06-16-2026

$ 256.32 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 285.99

This product was last offered at the strikethrough price on
06-16-2026

$ 256.32 USD
Free Shipping on orders $49 and up
The cooling hoses on your BMW are exposed to vast temperature changes, as well as exposure the elements. Over time, they will fail and can cause you to be stranded, or a worse failure. Turner Motorsport has created a kit that includes all of the necessary cooling system hoses as well as a gallon of coolant to correctly service your cooling system. See kit contents tab for a list of included components
Show More Show Less


Packaged by Turner - Corporate Logo
T#:556737
Part#: E46M3TISKT
In Stock
$ 316.57 USD
Free Shipping
$ 316.57 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338949
Part#: INSP2S54
In Stock
Starting at $ 110.98 USD
Free Shipping
Starting at $ 110.98 USD
Free Shipping
The E46 M3's engine is based on several race-developed engines - the S70/2 used in the McLaren F1 and the original S50 Euro engine released in 1995 and it traces its lineage all the way back to BMW's M1 inline-6. It blends racetrack technology with street car concessions. To keep your car running at its peak, you will want to invest in its care and that means a regular and strict maintenance schedule. The below M3 maintenance packages are standard recommendations from our experience and should be part of a larger overall service plan.

Keeping up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your E46 M3 will ensure you get many more miles from your BMW street racer.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW-Castrol 10W60 oil
  • replace drain bolt crush washer
  • reset oil service/maintenance light
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • engine oil analysis (to check for internal engine wear)
  • A/C cabin microfilter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect or replace emergency tire repair kit
  • inspect belts for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
30,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW-Castrol 10W60 oil
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line ATFD4 or Motul ATF
  • differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
  • replace oil pressure valve filter and o-rings
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
60,000 Mile Major Service and Valve Adjustment
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • adjust valves
  • valve cover gaskets (set includes main gasket, spark plug holes, and grommet seals)
  • inspect cam sprockets and mounting bolts for stress cracking
  • engine oil change with filter, using OE BMW-Castrol 10W60 oil
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • clean mass air sensor
  • fill and bleed cooling system
  • transmission fluid change, using Red Line ATFD4 or Motul ATF
  • differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • inspect main accessory pulleys for cracks
  • replace oil pressure valve filter and o-rings
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

Turner's Tip for a healthy S54:
+ First thing, stay on top of your maintenance. Nothing will hurt the performance and aftermarket upgrades more than a poor running car. And these cars like to throw codes that could be either small or a big problem. Find out fast!
+ Oil leaks are common from a small valve on the exhaust side of the engine block - the Constant Pressure Valve. At first glance it looks like a rear main seal is leaking but it's almost always this little gremlin.
+ If you notice a rattle coming from the front of the engine don't immediately assume it's the VAN0S system. The lower timing chain guide is held in with a bolt located behind the thermostat housing. This bolt has a bad habit of backing out which leaves the guide rail loose. If left un-checked for too long the guide rail will break and leave you with a very pricey engine rebuild. As a bonus you can replace the gasket on the oil filter housing as it's probably leaking too.
+ However, always make sure a VAN0S rebuild is in your budget too.
+ Have an engine oil analysis done annually. This will make it easier to spot internal engine wear, including rod bearing wear, as well as head gasket failure and coolant loss.
+ Check to see that your fan clutch is operating. The stock one has a high failure rate.
+ Power steering hoses - and their crimped connections - love to leak oil. It's almost always the high pressure line from the pump to the rack.
+ Rear subframe/floor failures - make sure you have this checked every year.
+ If you track it, make sure to change the oil often in the transmission and diff. This will be your first warning signs of a problem you can't see.

You may also want to pick up these other helpful items:
  • E46 Bentley Service Manual
  • We offer many DIY-related tools, specifically for the E46 owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!

    This package fits the following BMWs:
    2001-2006 E46 BMW M3


    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:402762
    Part#: M50LMOCP1
    In Stock
    Starting at $ 128.96 USD
    Free Shipping
    Starting at $ 128.96 USD
    Free Shipping

    Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

    Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

    Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

    Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

    Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

    New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

    Choose the level of Liqui Moly Oil Service your BMW deserves: 

    • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
    • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
    • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
    • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

    Below you can add new drain plug and crush washer, along with your choice of oil filter.

    This kit also features many Popular Service Tools that make your life easier when working on your BMW:

    • Turner Motorsport Magnetic Fender Cover
    • Schwaben 6.5L Fluid Extractor
    • Schwaben 14mm/17mm Service Wrench
    • Schwaben Professional BMW/MINI Scan Tool

    Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

    These products fit the following BMWs:

    1990-1996 E34 525i
    1991-2000 E36 320i 323i 323ti 325i 328i 328is
    1995-2004 E39 520i 523i 525i 528i 530i
    1997-2002 E36/7 Z3 2.0i Z3 2.2i Z3 2.5i Z3 2.8 Z3 3.0i
    1998-2006 E46 320I 320Ci 323i 323ci 325i 325xi 325Ci 328i 328Ci 330i 330xi 330Ci
    1995-2000 E38 728i 728iL 
    2002-2005 E85 Z4 2.2i Z4 2.5i Z4 3.0i
    2003-2005 E60/E61 520i 525i 525xi 530i
    2003-2006 E83 X3 2.5i X3 3.0i 
    2000-2006 E53 X5 3.0i
    2002-2005 E65/E66 730i 730Li

     

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:15710784
    Part#: 11137834886-KT
    In Stock at Vendor
    Sale - Save 8% $ 846.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 780.99 USD
    Free Shipping on orders $49 and up
    Sale - Save 8%
    $ 846.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 780.99 USD
    Free Shipping on orders $49 and up
    The S54 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. Kit includes Upper and lower WPC treated rod bearings for extra protection against wear Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket Oil pan cover gasket RedLine assembly lube Connecting rod bolts
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583532
    Part#: S54PISKT
    In Stock
    Sale - Save 19% $ 291.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 237.09 USD
    Free Shipping
    Sale - Save 19%
    $ 291.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 237.09 USD
    Free Shipping

    Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

    Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

    From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less
    APEX ARC-8 18x9" ET42 Satin Black Wheel 18.65lbs
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:180771
    Part#: ARC8189ET42SMBK
    Back Ordered
    $ 389.00 USD
    Free Shipping
    $ 389.00 USD
    Free Shipping
    18x9" ET42 Satin Black APEX ARC-8 Wheel 18.65lbs
    Wheel Specs
    Fitment:Rear
    Size:18x9.0"
    Offset (mm):42
    Weight (lbs):18.65
    Profile:Flat, not concave

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    APEX ARC-8 17x8.5" ET40 Hyper Black Wheel 17.2lbs
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:341792
    Part#: ARC81785ET40HBK
    Ships in 4 Business Days
    $ 339.00 USD
    Free Shipping
    $ 339.00 USD
    Free Shipping
    Packaged by Turner - Corporate Logo
    T#:401618
    Part#: TSU4695PBX/16KT
    In Stock
    Sale - Save 19% $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping
    Sale - Save 19%
    $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping

    For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

     These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:3586301
    Part#: 41007895884KKT
    In Stock
    Sale - Save 8% $ 114.99

    This product was last offered at the strikethrough price on
    06-09-2026

    $ 106.24 USD
    Free Shipping
    Sale - Save 8%
    $ 114.99

    This product was last offered at the strikethrough price on
    06-09-2026

    $ 106.24 USD
    Free Shipping
    Includes wiring and plugs needed when converting to a CSL trunk

    Prosport Performance - Corporate Logo
    T#:385025
    Part#: HEA-WRAPKIT-25
    Ships in 2 Business Days
    $ 29.99 USD
    Free Shipping on orders $49 and up

    Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

    Key Features:

    • 2" wide x 1/16" thick
    • Durable, tightly woven, 100% fiberglass
    • Reduce under hood temperatures
    • Protect other engine components
    • Protect your hands/arms from burns
    • Each roll comes with 5 FREE, 14" long stainless steel zip ties
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5416780
    Part#: 31126777851TMSKT
    In Stock
    $ 591.99

    This product was last offered at the strikethrough price on
    05-13-2026

    $ 535.99 USD
    Free Shipping
    $ 535.99 USD
    Free Shipping
    The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right Meyle HD control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:555685
    Part#: PBTSRKT
    In Stock
    Sale - Save 13% $ 251.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 219.63 USD
    Free Shipping
    Sale - Save 13%
    $ 251.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 219.63 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:555717
    Part#: PBTSRKT21
    In Stock
    $ 140.99 USD
    Free Shipping
    $ 140.99 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

    This kit is perfect to restore your driving pleasure!

    See the included components under Kit Contents below.

    Show More Show Less
    APEX ARC-8 18x9.5" ET35 Satin Black Concave Wheel 18.85lbs
    Front Fitment Note: very aggressive fitment, fender rolling and alignment changes may b...
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:180712
    Part#: ARC81895ET35SMBK
    Ships in 9 Business Days
    $ 399.00 USD
    Free Shipping
    $ 399.00 USD
    Free Shipping
    18x9.5" ET35 Satin Black Concave APEX ARC-8 Wheel 18.85lbs
    Wheel Specs
    Fitment:Rear
    Size:18x9.5"
    Offset (mm):35
    Weight (lbs):18.85
    Profile:Concave

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less