Revamp your tire aesthetics with the Tire Marker - White by Rennline. This high-quality tire marker allows you to add personalized touches to your tires, enhancing their appearance and visibility. Easy to use and durable, this tire marker is a must-have accessory for any car enthusiast.

• Personalize your tires with white marker
• Enhances tire appearance and visibility
• Easy to use
• Durable construction for long-lasting performance

• 55MM, 75MM, 90MM LENGTHS
• Black phosphorous corrosion resistant coating
• "OEM" appearance
• Full-length threads for more nut engagement in tight spaces
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.

ECS Tuning is proud to offer extended wheel bolts individually or with our spacers that are matched to take the guesswork out of correct fitment. Our bolts are designed to meet ISO 898 class 10.9 mechanical and physical properties. This is a very strict standard that specifies material properties, hardening and tempering requirements, and proof load strength requirements. Furthermore, our fasteners have been lab tested to verify that they meet class 10.9 requirements.

Bolt specifications:

• Diameter - 12mm
• Thread Pitch - 1.5mm
• Length - 50mm

*When installing wheel spacers, add the size of the spacer to the length of the OE wheel bolt for proper fitment (ex. 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

Upgrade your BMW's performance with ECS Titanium Wheel Bolts

Designed for weight reduction and durability, these bolts are 50% lighter than steel counterparts, reducing rotational mass for improved handling and acceleration. Crafted from annealed titanium alloy, they undergo rigorous testing to ensure reliability and resistance to fatigue.

Benefits:

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for durability
• Tested to class 10.9 fastener proof load requirements for reliability
• Compatible with wheel spacers for versatile fitment

Before installation, ensure thorough cleaning of hub threads to prevent fatigue and cracking of the titanium alloy. Upgrade your BMW with ECS Titanium Wheel Bolts for enhanced performance and durability.

ECS Tuning proudly presents extended wheel bolts, available individually or matched with our spacers to ensure precise fitment. These bolts adhere to the stringent ISO 898 class 10.9 standards, guaranteeing exceptional mechanical and physical properties. Lab-tested to confirm class 10.9 compliance, they meet rigorous requirements for material properties, hardening, and proof load strength.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 32mm

Note: For wheel spacer installation, add the spacer size to the OE wheel bolt's length for accurate fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Conical Seat Wheel Bolt - 12x1.5x30mm

Elevate your vehicle's performance and style with the Conical Seat Wheel Bolt - 12x1.5x30mm. Engineered for precision and durability, this wheel bolt ensures a secure fit for your wheels. Its conical seat design enhances wheel alignment and stability, providing optimal driving experience. Install these bolts effortlessly and enjoy a smoother, safer ride.

• Precision-engineered for optimal performance
• Durable construction for long-lasting reliability
• Conical seat design enhances wheel alignment and stability
• Easy installation process for convenience

BMW Conical Seat Wheel Bolt - 12x1.5x47mm

Enhance your BMW's performance with the top-tier BMW Conical Seat Wheel Bolt - 12x1.5x47mm. Engineered with precision and designed for durability, this wheel bolt ensures a secure fit for your BMW vehicle. Invest in quality and elevate your driving experience with this premium BMW accessory.

• Precision-engineered for BMW vehicles
• Durable construction ensures long-lasting performance
• Secure fit for enhanced safety and stability
• Improves overall performance of the vehicle

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

• Reversible ½-inch drive click-to-stop
• Torque range of 10 to 150 ft-lb
• Accurate to within +/-4%
• 18 inches in length with a convenient carry case

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.