BMW Drivetrain Parts for BMW 3 Series E46 (1999-2005)

If you've ever bled the clutch hydraulic system on your BMW, you know how frustrating it can be. Designed with both DIY enthusiasts and professional technicians in mind, our clever tool simplifies one of the most notoriously annoying steps in clutch service.

Crafted from high-quality aluminum and finished in a durable black anodized coating, our clutch slave cylinder bleeder tool is built to last. Its function is simple: the adjustable piston rod applies controlled pressure directly to the clutch slave cylinder’s piston, compressing it and reducing its internal volume. By minimizing the amount of air trapped inside the cylinder, bleeding becomes faster, cleaner, and far more effective—no more endless pedal pumping or inconsistent clutch feel. The result is firm, consistent clutch pedal engagement and a smoother overall driving experience, all achieved with less time and effort underneath the car.

FEATURES & BENEFITS

Simplifies bleeding the BMW clutch hydraulic system by reducing trapped air in the slave cylinder Eliminates excessive pedal pumping and inconsistent clutch feel Helps achieve firm, consistent clutch pedal engagement Crafted from high-quality aluminum for strength and longevity Durable black anodized finish resists wear and corrosion Designed for both DIY enthusiasts and professional technicians PRODUCT DEVELOPMENT

Our Clutch Slave Cylinder Bleeder Tool was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Single piece 6061 construction, optimized cooling, provisions for temp sensor and external cooler!

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing our diff cover can handle anything you throw at it. Not only is it an absolute masterpiece to look at but this billet diff cover checks all the boxes for features needed. Reinforced mounting ears for strength and stability, never again will you break an ear off your diff cover like the factory units are known to do. Each ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. Internal fins are strategically placed serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The mounting surface was designed to be compatible with both the OEM gasket or RTV of your choosing, some people don't trust the gaskets and we get it. Factory bushing geometry allows you to use any E46 diff busing including rubber, poly, and even solid mounts. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now also be used for expanding to an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Why the upgrade?

Upgrading to our Billet Differential cover gives you the strength you need to push your car to its limits. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include increased capacity, improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, all while looking good in the process.

Key Benefits:

Reinforced mounting ears for strength and stability - never again will you break an ear off during an aggressive drive or track event
Increased capacity
Sight glass for checking fluid level without removing fill/drain plug
External fins on the casing for maximum cooling and consistent fluid temps
Internal cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:

Fits large case 210/215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features including the use of the OEM gasket
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Easy access to sensors and drain/fill plug
Retains OEM speed sensor and wire mount location
Product development:

Our Reinforced Billet Diff Cover was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

This is the OE shifter for the E46 325xi and the 330xi (up to 03/2003) and the E36 Z3 1.9 and 2.5.

The shift lever out of the Z3 1.9 delivers a smooth and quiet shift without the notchiness and effort of aftermarket short shift kits. The Z3 shifter in the E30 is approximately 20% shorter than the original E30 shifter - less reduction than a full short shift kit but the perfect compromise between stock and aftermarket. We have installed multiple shift levers in the E30 but the Z3 1.9 feels the best to us. The shift knob height is reduced by about 1/4". This is the Genuine BMW Z3 1.9 shift lever and a direct fit to 6/86-1992 E30 318i/is, 325e/es, and 325i/is.

E30 install note: there is a bowl-shaped vibration damper mounted with the transmission flex disc (guibo). This damper needs to be removed or you need to bend the stock selector rod so it will clear. Most E30s already have the vibration damper removed so don't be surprised if it's not there. If you do choose to remove it, this would be the perfect time to replace the flex disc. On some 325e models the flex disc is a larger diameter and the selector rod will need to be bent to clear it.

This item fits the following BMWs:
1990-1992 E30 BMW 318i 318is 318ic
6/1986-1992 E30 BMW 325e 325es 325i 325ic 325is

Ensure smooth clutch operation in your BMW with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing. This crucial component, situated between the clutch pressure plate and release fork lever, is essential for optimal performance. When renewing your clutch, don't overlook the importance of replacing this genuine BMW bearing.

Key Benefits:

• Genuine BMW quality guarantees a perfect fit.
• Prevents clutch-related issues for reliable performance.

Upgrade your BMW's clutch system with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing.

This is the shifter actuator pin that's part of BMW's gate system for the shifter.

Genuine BMW Locking Pin
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E46 Non-M
E85 Z4 2.5i/3.0i/3.0si
E89 Z4 3.0si

A sloppy shifter can make your driving experience miserable. Luckily these Genuine BMW shifter rebuild kits are available to restore the crisp feel of a brand new shifter. This kit includes all of the Genuine BMW components that normally wear down and cause issues such as the bushings, clips, and dowel pin.

See all of the included components below!

Upgrade your BMW with the Genuine BMW Front Wheel Hub/Bearing Assembly from Turner Motorsport. Engineered to the highest standards, this assembly ensures optimal performance and reliability for your vehicle. If you're noticing excessive vibration, a humming noise while driving, or unusual sounds when turning, it's likely time to replace your wheel bearing. This hub assembly, with the bearing pre-pressed, offers a hassle-free installation experience. Suitable for both left and right sides, it's a convenient solution to keep your BMW running smoothly.

• Genuine BMW quality ensures reliability and longevity
• Pre-pressed bearing for easy installation
• Eliminates the hassle associated with typical bearing replacements
• Suitable for both left and right sides