Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
E90/E92/E93 M3 

Our blackout fender grilles will help your vehicle stand out. Made of 100% ABS plastic, they are resistant to cracking and chipping. Developed and engineered with the OEM standard as the framework, all our fender trims are made with 100% non-recycled raw plastic that results in overall durable construction with strong clips and tabs for a secure and seamless fit. Each trim is individually finished with precision that yields a product of superior quality and  fit to clean up ­your fenders. 

Includes one pair of passenger and driver side direct replacement fender grilles. Installation is simple and can be done in a matter of minutes in your own garage.

This product fits the following BMWs:
2007-2011 E90 M3
2007-2013 E92 M3
2007-2013 E93 M3

Upgrade Your BMW's Performance

Elevate your BMW's performance with our specialized High Performance Replacement Filter designed for the Stage 2 Intake Charge Kit. Engineered to optimize and enhance the stock intake system, this filter guarantees maximum airflow for improved engine efficiency.

• Direct replacement for OEM filter panel
• Washable and reusable cotton gauze for increased airflow
• Removal of charcoal-impregnated lining enhances airflow
• Durable sidewall construction ensures long-lasting performance
• Provides a secure, leak-proof seal with factory air box
• Multi-layered pleats maximize airflow while maintaining protection levels
• Maintains OEM filter's debris collection efficiency
• Preserves BMW engineered pressurized air box and factory appearance
• Includes adapter for EU or MY10+ models for universal fitment

Note: Compatible exclusively with the Stage 2 Intake Charge Kit.

Supported Models: 2008+ E9X M3

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles

BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

• Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
• Prevents damage to rocker panels or vehicle undercarriage
• Made from solid billet aluminum for durability
• Engraved Burger Motorsports logo for authenticity
• Honeycomb grip pattern for stability during use

Replace your cracked or damaged center console with carbon fiber. Our full replacement carbon fiber center console is wrapped in 2x2 weave carbon fiber. Our console includes the front center ashtray cover. Only fits vehicles with M-DCT Transmission. 

This product fits the following BMWs:
2009-2013 E90 / E92 M3