Please ensure your correct model is selected
BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.
VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.
Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve
Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.
This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54
NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES
The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.
Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.
While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.
Kit Includes:
This part fits the following BMWs:
2006-2013 N54
We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.
Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.
This product fits the following BMWs:
E90/E92/E93 M3
We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.
Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.
This product fits the following BMWs:
E90/E92/E93 M3
We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.
Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.
This product fits the following BMWs:
E90/E92/E93 M3
This product was last offered at the strikethrough price on
05-15-2026
This product was last offered at the strikethrough price on
05-15-2026
Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.
Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 17x9.0" |
| Offset (mm): | 42 |
| Weight (lbs): | 17.2 |
| Profile: | Flat, not concave |
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Looking to add style to your M3? These carbon fiber Fender Side Grills replace the stock chrome or black gloss trim that connects to the inner grill component. This is a great addition to existing carbon fiber component such as a rear spoiler or front lip. This also looks great as a simple add-on all by itself if you want to keep a clean but sporty look!
Fitment:
2008-2013 E9X BMW M3
Treat your M3 to some carbon fiber exterior accents with Autotecknic's hood vent trim kit. Developed and engineered with the OEM standard as the framework, our hood vents are made with 100% non-recycled raw plastic that results in overall durable construction with strong clips and tabs for a secure and seamless fit. Each trim is individually finished with precision that yields a product of superior paint quality and fit to accentuate any vehicle. Includes one pair of direct replacement hood vents.
This product fits the following BMWs:
E9x M3
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 17x9.0" |
| Offset (mm): | 30 |
| Weight (lbs): | 16.55 |
| Profile: | Concave |
Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!
Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.
This product was last offered at the strikethrough price on
06-28-2026
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.0" |
| Offset (mm): | 42 |
| Weight (lbs): | 18.65 |
| Profile: | Flat, not concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x11.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 23.35 |
| Profile: | 3, deep dish |
Our blackout fender grilles will help your vehicle stand out. Made of 100% ABS plastic, they are resistant to cracking and chipping. Developed and engineered with the OEM standard as the framework, all our fender trims are made with 100% non-recycled raw plastic that results in overall durable construction with strong clips and tabs for a secure and seamless fit. Each trim is individually finished with precision that yields a product of superior quality and fit to clean up your fenders.
Includes one pair of passenger and driver side direct replacement fender grilles. Installation is simple and can be done in a matter of minutes in your own garage.
This product fits the following BMWs:
2007-2011 E90 M3
2007-2013 E92 M3
2007-2013 E93 M3
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:
Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.
Package Contents: One set of AutoTecknic universal carbon fiber splitters.
Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
