BMW 3 Series E92 (2007-2013)

Autotecknic Glazing Black Front Grille Set - E9x M3

T#:21440004

Part#: ATK-BM-0176-G

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Alpine White Front Bumper Reflectors - E9x M3

T#:302072

Part#: BM-0995-AW

Ships in 7 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
E90/E92/E93 M3

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

10X Entries Into Our F80 M3 Sweepstakes

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Space Grey Metallic Front Bumper Reflectors - E9x M3

T#:302079

Part#: BM-0995-SGY

Ships in 7 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
E90/E92/E93 M3

Show More Show Less

Autotecknic Carbon Front Grille Set - E92/ E93 3-Series / M3 ...

For Pre-LCI models only

T#:21407036

Part#: ATK-BM-0178-P

In Stock

$ 210.00 USD

Add to Wish List

Qty

$ 210.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may not have been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Replace your plastic kidney grilles with these dual-slat carbon fiber replacements for your 3-series and achieve a more aggressive and high-quality look! Package includes one pair of passenger and driver side direct OEM replacement front grilles.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

Sale - Save 15% $ 68.99

This product was last offered at the strikethrough price on
09-03-2026

$ 58.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 68.99

This product was last offered at the strikethrough price on
09-03-2026

$ 58.64 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

AutoTecknic Carbon Fiber Hood Vents - 1x1 Weave - E90 M3 | E92 M3 | E...

T#:39025518

Part#: BM-0238-PW

In Stock

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

These vents are not just ordinary; they are crafted from 100% non-recycled raw plastic, guaranteeing exceptional durability.

Autotecknic Replacement Carbon Fiber Mirror Covers - BMW E90/ E92/ E9...

T#:21472876

Part#: ATK-BM-0152-P

In Stock

Sale - Save 5% $ 300.00

This product was last offered at the strikethrough price on
05-15-2026

$ 283.70 USD

Add to Wish List

Qty

Sale - Save 5%

$ 300.00

This product was last offered at the strikethrough price on
05-15-2026

$ 283.70 USD

Add to Wish List

Carbon Fiber replacement mirror covers by Autotecknic for the E9x 3-series and E82 1M. Designed for a seamless OEM fit. Great for lost, damaged, or worn mirror covers and people just looking to upgrade! Composed of carbon fiber with a glossy finish! Includes one pair of full replacement mirror covers (one driver side, one passenger side) Made from 100% non-recycled plastic with carbon fiber overlay Compatible with the following BMW models: E90/ E92/ E93 M3 | E82 1M Designed and assembled in the USA

Show More Show Less

E9X Macht Schnell Driver Side Clubsport Seat Mount

T#:16907171

Part#: 70.10.203

Ships on Sep 23, 2026

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

AutoTecknic Gloss Black Hood Vent Set - E90 M3 | E92 M3 | E93 M3 ...

T#:39025521

Part#: BM-0238-GB

In Stock

$ 120.00 USD

Add to Wish List

Qty

$ 120.00 USD

Add to Wish List

An excellent choice for BMW enthusiasts looking to boost their M3’s cooling efficiency and visual appeal.

Autotecknic Clarity LED Angel Eye Bulbs - H8

T#:21275584

Part#: ATK-BM-0268

In Stock

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Sometimes a simple change can make all the difference in the appearance of your car. These angel eye bulbs replace the standard dull yellow halogen bulbs and replace them with LED bulbs that are not only 3 times brighter but have a longer life span. Plug-and-play kit offers Fits the following BMWs: 2007-2010 E60/1 BMW LCI vehicles with Xenon Headlights 2009-2012 E90/1 BMW LCI vehicles with Xenon Headlights and all M3's 2007-2010 E92/3 BMW Pre-LCI models with Xenon Headlights and all M3's 2007-2013 E70 BMW with Xenon Headlights 2008-2014 E71 BMW with Xenon Headlights 2007-2013 E82/88 BMW with Xenon Headlights 2009-2016 E89 BMW Z4 with Xenon Headlights 2008-2010 E63/4 BMW LCI vehicles with Xenon Headlights 2013-2015 E84 BMW with Xenon Headlights the ease OEM fitment with no bulb out warning.

Show More Show Less

Macht Schnell Passenger Side Clubsport Seat Mount - E9X BMW

T#:16907173

Part#: 70.10.204

Ships on Oct 20, 2026

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50

T#:385019

Part#: HEA-WRAPKIT-50

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530040

Part#: VACUUMCANBLUE

Ships in 1 Business Day

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Carbon Fiber Hood Vent Grill Trim Kit - E9x M3

T#:395985

Part#: BM-0238

In Stock

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Treat your M3 to some carbon fiber exterior accents with Autotecknic's hood vent trim kit. Developed and engineered with the OEM standard as the framework, our hood vents are made with 100% non-recycled raw plastic that results in overall durable construction with strong clips and tabs for a secure and seamless fit. Each trim is individually finished with precision that yields a product of superior paint quality and fit to accentuate any vehicle. Includes one pair of direct replacement hood vents.

This product fits the following BMWs:
E9x M3

Show More Show Less

VTT Billet Power Steering Pulley - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Sale - Save 15% $ 56.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 48.44 USD

Add to Wish List

Sale - Save 15%

$ 56.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 48.44 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

Billet Large Capacity BMW DCT Transmission Pan

2X Entries Into Our F80 M3 Sweepstakes

T#:19593973

Part#: VTT-DCT-PAN

Ships in 10 Business Days

Sale - Save 15% $ 523.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 445.39 USD

Add to Wish List

Sale - Save 15%

$ 523.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 445.39 USD

Add to Wish List

Product Features: Billet construction using 6061-T6 aluminum for long life, and added strength 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML Machined fins for improved cooling Rare Erath magnet built in to pull metal from the fluid US-Made Viton Gasket -6 ORB drain plug for easy service VTT is Proud to offer the Billet Aluminum DCT Transmission pan. This pan is an upgrade from the factory equipped plastic pan, to a 6061-T6 aluminum anodized pan in a variety of colors. This DCT pan increases fluid capacity by 80%, almost DOUBLE the stock pan. This pan utilizes a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug.

Show More Show Less

VTT M12 Titanium Wheel Stud Kits

2X Entries Into Our F80 M3 Sweepstakes

T#:7292019

Part#: TISTUD20125

In Stock

Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

Sale - Save 7%

$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

Titanium Exhaust Wrap - 2" X 25'

T#:385025

Part#: HEA-WRAPKIT-25

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Key Features:

2" wide x 1/16" thick
Durable, tightly woven, 100% fiberglass
Reduce under hood temperatures
Protect other engine components
Protect your hands/arms from burns
Each roll comes with 5 FREE, 14" long stainless steel zip ties

Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'

T#:385020

Part#: HEA-GWRAP-15

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Show More Show Less

VTT Complete Blue N54 Coolant Hose Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:17771579

Part#: VTT-N54-COOLANTB

In Stock

Sale - Save 15% $ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

Upgrade your BMW N54's cooling system with VTT's Billet/Silicone coolant hose upgrade kit. Designed to address common issues with factory plastic connectors and standard coolant hoses, this kit offers premium enhancements for durability and performance. Crafted with Billet 6061-T6 connectors for corrosion resistance and 6-ply molded silicone hoses in factory shapes, it ensures reliability and longevity for your BMW's cooling system.

Upgraded Billet 6061-T6 connectors for enhanced durability
Corrosion-resistant black anodized finish
6-ply molded silicone hoses for superior performance
Factory-shaped design for easy installation

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

2X Entries Into Our F80 M3 Sweepstakes

T#:22196341

Part#: VTTS55CLCNV

Ships in 6 Business Days

Sale - Save 15% $ 335.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 285.59 USD

Add to Wish List

Sale - Save 15%

$ 335.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 285.59 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED ...

T#:31390598

Part#: PSTOP270-12

In Stock at Vendor

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.

Show More Show Less

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

VTT Billet / Silicone Full Coolant Hose Kit - Red - BMW E82/E88 E9X N...

2X Entries Into Our F80 M3 Sweepstakes

T#:22987117

Part#: VTT-N54-COOLANTR

Ships in 1-2 days

Sale - Save 15% $ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

VTT is proud to announce our N54 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run of the mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6 ply silicone molded silicone hoses in the factory shapes. Full hose kit includes: Upper Radiator hose Lower Radiator hose Cylinder head outlet hose (Mickey Mouse hose, this hose is notorious for breaking when removed) Upper vent hose (this hose is also notorious for breaking as stock the center is plastic that crumbles when moved) Water pump inlet hose (Horse Shoe hose)

Show More Show Less

Autotecknic Clarity 24 LED Fender Turn Signal Set - E90 M3 / E92 M3 /...

T#:21407056

Part#: ATK-BM-0266

Ships in 7 Business Days

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

These sleek Autotecknic fender turn signals are not only brighter but give your car a more sleek look giving you better visibility and more confidence when changing lanes! Don't settle for anything less than perfection - upgrade your E9X M3 with our complete replacement combination set today!

Show More Show Less

Dry Carbon Fiber Money Clip - matte

T#:395883

Part#: UN-0012-V2

Ships in 7 Business Days

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

Our dry carbon fiber money clip is a better alternative to "lightening your wallet"

VTT Billet Engine Stand Plate - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:10128413

Part#: VTT-ENGPLT-V1

Ships in 10 Business Days

Sale - Save 15% $ 110.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 94.34 USD

Add to Wish List

Sale - Save 15%

$ 110.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 94.34 USD

Add to Wish List

Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? Vargas answered yes to all of those things and made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! The engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. These are lightweight, and rated for over 1200 lbs!

Show More Show Less

AutoTecknic Gloss Black Mirror Cover Set - E90/ E92/ E93 M3 | E82 1M ...

T#:38857241

Part#: BM-0152-GB

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Elevate the style of your BMW E90/ E92/ E93 M3 or E82 1M with the AutoTecknic Gloss Black Mirror Cover Set, featuring a bold, sleek finish and a flawless fit.

Hood Vent Trim Kit - Matte Black - E90 E92 M3

T#:5653

Part#: BM-0238-MATTE

Ships in 7 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

These direct replacement matte black hood vents give you the stealth look of the M3 GTS. They feature perfect fit and beautiful finish, and give you a darker more aggressive look to your M3. Kit includes two blacked out hood vent trim panels with matte black finish.

This item fits the following BMWs:
2006+ E90 BMW M3 - Sedan
2007+ E92 BMW M3 - Coupe
2007+ E93 BMW M3 - Convertible

Show More Show Less

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships on Sep 30, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

Replacement Carbon Fiber Door Handles w/ Keyhole - 4 Door

For Vehicles With Comfort Access

T#:396226

Part#: BM-0365

Ships in 7 Business Days

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

These door handles are wrapped in carbon fiber. Utilizing BMW OEM door handle pieces and skillfully wrapped in carbon fiber, it will ensure perfect fitment while being unique from the rest of the crowd. It's a very limited item, get it while it's available.Total of 4 pieces that replace your OEM painted door handles and keyholes directly onto your door. Professional installation is highly recommended.

Show More Show Less

Autotecknic Carbon Fiber Steering Wheel Trim - E9X M3 | E82 1M Coupe ...

T#:21407032

Part#: ATK-BM-0188-E9XM

Ships in 7 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This steering wheel trim will add a bespoke look to the interior of your M3/ 1M! Designed to fit exactly as the factory piece does, this new trim installs in minutes and stays securely in place just like the OEM piece did. Since it is made with ABS material, fitment is guaranteed. This is for someone who wants to add a sporty look to their E9X M3.

Show More Show Less

Un-Painted Reflectors - E90/ E92/ E93 M3

T#:396089

Part#: BM-0995-UP

Ships in 7 Business Days

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

We developed our reflector deletes to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of unpainted reflectors.

This product fits the following BMWs:
E90/E92/E93 M3

Show More Show Less

AutoTecknic Replacement Version II Dry Carbon Mirror Covers - E9X M3 ...

T#:38857246

Part#: BM-0152-DCG-T

Ships in 7 Business Days

$ 445.00 USD

Add to Wish List

Qty

$ 445.00 USD

Add to Wish List

These version II dry carbon mirror covers weigh only 121 grams, VS the version I ABS overlay at 239 grams on each side; that’s almost half the weight shaved! Other than the mounting clips, it's made of 100% carbon fiber, lighter in weight, and high tensile strength than our ABS overlaid version.

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Autotecknic Carbon Fiber Front Grille Set - E92 / E93 | 3 Series LCI ...

For vehicles with production date from 03/2010

T#:21407086

Part#: ATK-BM-0242

Ships in 7 Business Days

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may not have been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Replace your plastic kidney grilles with these dual-slat carbon fiber replacements for your 3-series and achieve a more aggressive and high-quality look! Package includes one pair of passenger and driver side direct OEM replacement front grilles.

Show More Show Less

AutoTecknic Dry Carbon Fiber Mirror Cap Set - E92 3-Series Coupe LCI ...

T#:38924620

Part#: BM-0150-LCI-DCG

In Stock

$ 350.00

This product was last offered at the strikethrough price on
06-30-2026

$ 308.00 USD

Limited Qty Sale

Add to Wish List

Qty

$ 350.00

This product was last offered at the strikethrough price on
06-30-2026

$ 308.00 USD

Limited Qty Sale

Add to Wish List

AutoTecknic Dry Carbon Interior Door Handle Trims - E92 3-Series & M3...

T#:39261797

Part#: BM-0359

Ships in 7 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

The AutoTecknic Dry Carbon Interior Door Handle Trims offer the perfect blend of luxury, durability, and motorsport-inspired design.

Glossy Carbon Fiber Bi-Fold Wallet

T#:1790

Part#: TMS1790

Ships in 7 Business Days

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

If you simply can not get enough carbon fiber in your life, then this will be a must have. Our simple men's bi-fold wallet features real carbon fiber and stitched soft black leather. It's meant to be thin, light weight and the carbon fiber is coated and flexible so that it is comfortable in your pocket.

This carbon fiber wallet features the following:

Nine credit card slots
Two hidden slots underneath the nine slots
Flip-out inside flap with clear window for your ID
Divider inside the currency portion, for cash, receipts, checks, etc
Wallet measures 3.75" x 4.5" (9.5cm x 11.5 cm)

Show More Show Less

VTT Billet S65 Power Steering Pulley

2X Entries Into Our F80 M3 Sweepstakes

T#:20749262

Part#: VTT-S65-PSP

Back Ordered

Sale - Save 15% $ 57.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 49.29 USD

Add to Wish List

Sale - Save 15%

$ 57.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 49.29 USD

Add to Wish List

Never worry about the problematic plastic power steering pump pulley ever again! These are made from 6061-T6 aluminum and anodized in one of 5 colors (Black, Red, Blue, Gold and Clear) for a great look, and long-lasting finish. These weigh 7Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market. Kit includes: One Billet Power Steering Pulley

Show More Show Less

Autotecknic Carbon Fiber Front Bumper Reflectors - BMW E9x M3 ...

T#:21275588

Part#: ATK-BM-0995-CF

Ships in 7 Business Days

$ 110.00 USD

Add to Wish List

Qty

$ 110.00 USD

Add to Wish List

Do you dislike the orange factory reflectors that came on your M3? The folks at Autotecknic created a simple carbon fiber replacement that replaces that ugly orange with these sleek carbon fiber replacements. Made with 3k plain weave and then coated with a gloss UV protectant coating, the reflectors take away the orange inconsistencies from the original reflectors! Package includes a pair of the E90 M3/ E92 M3/ E93 M3 carbon fiber bumper reflectors

Show More Show Less

Prosport Fiberglass Exhaust Wrap - White - 2" x 50'

T#:385017

Part#: HEA-WRAPKIT-WHT

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Prosport Fiberglass Exhaust Wrap - Black - 2" x 50'

T#:385018

Part#: HEA-WRAPKIT-BLK

Ships in 10 Business Days

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

52mm Prosport Electrical Boost Gauge - Clear Lens/White LED

T#:31191884

Part#: PSTEBO270-12

In Stock at Vendor

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

52mm Prosport Electrical Boost Gauge - Clear Lens/White LED is an essential tool for any supercharged or turbocharged vehicle. This precision gauge allows drivers to monitor boost levels with accuracy and style, ensuring peak performance and optimal engine tuning.

Accurate Boost Monitoring: Provides precise readings of boost pressure, essential for maintaining peak performance.
Clear Lens: Offers a clear view of gauge readings under various lighting conditions.
White LED Backlighting: Ensures easy readability and a stylish appearance, even in low-light environments.
Durable Construction: Built to withstand high-performance conditions and continuous use.
Easy Installation: Designed for straightforward installation with included mounting hardware.

Show More Show Less

AUTOTECKNIC Grab Handle Glasses Case - BMW E Chassis Vehicles - Black...

T#:21012611

Part#: ATK-BM-0322

Ships in 7 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

While the grab handles in your car are pretty useful, the one above the driver can be considered occasionally redundant while E-chassis BMWs typically have poor storage options for sunglasses. To combat both of these topics, AUTOTECKNIC created a sunglasses holder that replaces your driver-side grab handle to have a convenient safe place to store your sunglasses! Satisfy your carbon urge today!

Show More Show Less

AutoTecknic Dry Carbon Coolant Expansion Tank Cap Cover - Gloss Carbo...

T#:39497984

Part#: BM-0803-GC

Ships in 7 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Turner Motorsport offers the AutoTecknic Dry Carbon Coolant Expansion Tank Cap Cover - Gloss Carbon as the perfect addition for BMW owners looking to elevate their engine bay’s appearance with premium materials and precision engineering.

Show More Show Less

Digital Air Fuel Ratio Kit-Amber LCD - 2-1/16" Wideband

T#:26005242

Part#: PSAFRLCDWB4.9AMB

Ships in 1 Business Day

$ 218.99 USD

Add to Wish List

Qty

$ 218.99 USD

Add to Wish List

Enhance your BMW's engine performance monitoring with the Wideband Air Fuel Ratio Gauge. This gauge features an Amber LCD Display and provides precise readings with its 0-5 volt output signal. Powered by the latest Bosch wideband O2 sensor, this gauge offers the widest range of AFR readings from 10.0:1 to 20.0:1. With its intuitive design, the gauge displays AFR levels in real-time, changing from green (Rich) to Yellow (Optimal) to Red (Lean) for immediate reference.

Key Benefits:

Wide range of AFR readings for comprehensive engine monitoring
Amber LCD display ensures clear visibility in various lighting conditions
Bar-graph LED indicators provide quick reference to AFR levels
Complete kit includes all necessary components for easy installation
Plug and play design for hassle-free setup
0-5 volt output signal enables data logging for performance analysis

Upgrade your BMW's monitoring capabilities with the Wideband Air Fuel Ratio Gauge, providing accurate AFR readings and intuitive display features.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

DCT Shift Paddles - E9X M3 DCT - Carbon Fiber

T#:396138

Part#: BM-0161-CF

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Our racing paddles for the BMW E9X M3 with the DCT transmission enhance the look of the interior while giving you an advantage on the track. When turning, these paddles allow you 30% more rotation without having to remove your right hand to shift. These also allow you to wheel shift comfortably with your elbows resting on your legs - offering improved performance for the track and comfort for daily driving.

Professional installation recommended.

This product fits the following BMWs:
2007-2011 E90 M3
2007-2013 E92 M3
2007-2013 E92 M3
2010-2013 E70 X5M
2009-2014 E71 X6M M-DCT

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results