BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

HJS - Corporate Logo
T#:556847
Part#: 18201401797
Ships on Sep 1, 2026
$ 35.99

This product was last offered at the strikethrough price on
07-15-2026

$ 24.64 USD
Free Shipping on orders $49 and up
$ 24.64 USD
Free Shipping on orders $49 and up
Rear muffler hanger
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
HJS - Corporate Logo
T#:396285
Part#: 11657620508
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

  • Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
  • Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
  • Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
  • Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
  • Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.
Show More Show Less

HJS - Corporate Logo
T#:2423575
Part#: 1K0253141N
In Stock
18% off MSRP $ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up
Commonly found between mid-pipe and front muffler. 60x95mm

GSP North America - Corporate Logo
T#:22591964
Part#: NCV27005
In Stock
$ 151.99 USD
Free Shipping on orders $49 and up

Choose GSP for Your Hub Assembly, Axle Shaft, and Loaded Strut Needs

Since 2004, GSP has been a trailblazer in the North American axle industry. With an extensive range of applications, a wide SKU count, and a track record of introducing the latest applications ahead of the competition, GSP is the go-to choice. In 2010, GSP expanded into hub assemblies and swiftly earned the trust of the industry, becoming the most reliable brand.

When it comes to your hub assembly, axle shaft, and loaded strut needs, you can have full confidence in GSP's expertise.

Key Features:

  • Superior quality based on long term development through ISO/TS16949 certifications
  • The strictest quality control standards to ensure the best end result to the customer
  • Constructed of high-quality materials for a superior product at a low price
  • Designed for application-specific needs
  • Consistently driving to offer the broadest catalog
Show More Show Less
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
Ships in 3 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less

KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Aug 17, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less

Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
In Stock
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
Black Forest Industries - Corporate Logo
T#:4813284
Part#: GS2-BMA-2
Ships on Aug 12, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less


Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 2 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader
Black Forest Industries - Corporate Logo
T#:4813289
Part#: GS2-BMA-2SUF
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813288
Part#: GS2-BMA-2SU
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813290
Part#: GS2-BMA-2SRU
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813293
Part#: GS2-BMA-2RC
Ships on Aug 12, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813291
Part#: GS2-BMA-2SRC
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813285
Part#: GS2-BMA-2U
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Autel - Corporate Logo
T#:2914129
Part#: AL529HD
Ships in 7 Business Days
$ 264.99 USD
Free Shipping on orders $49 and up
Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less


Black Forest Industries - Corporate Logo
T#:4813287
Part#: GS2-BMA-2S
Back Ordered
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less
APR Black Valve Stem Caps - Pack of 4
Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!
APR - Corporate Logo
T#:22987107
Part#: MS100197
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up

APR Black Valve Stem Caps are a stylish and functional upgrade for your vehicle's wheels. Sold as a set of four, these high-quality aluminum caps feature an engraved APR logo on each cap. Designed to add a touch of customization to your vehicle, they also serve a practical purpose.

  • Premium Quality: Made from durable aluminum for long-lasting performance.
  • Enhanced Aesthetics: Features an engraved APR logo for a sleek and stylish look.
  • Functional Design: Helps protect valve stems from dirt and moisture.
  • Easy Installation: Simple to install and compatible with most standard valve stems.

Upgrade your vehicle with APR Black Valve Stem Caps to enhance both style and functionality.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813286
Part#: GS2-BMA-2UF
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
GSP North America - Corporate Logo
T#:389674
Part#: 274254
Ships in 3 Business Days
$ 184.99 USD
Free Shipping
$ 184.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

2008+ E82 BMW 128i 135i 135is 
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2013+ E84 BMW X1 sDrive28i 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

Show More Show Less

GSP North America - Corporate Logo
T#:389678
Part#: 827214
Ships in 3 Business Days
$ 188.99 USD
Free Shipping
$ 188.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813292
Part#: GS2-BMA-2RU
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

HJS - Corporate Logo
T#:594771
Part#: 11627830668
Ships in 8 Business Days
$ 9.99

This product was last offered at the strikethrough price on
07-17-2026

$ 9.02 USD
Free Shipping on orders $49 and up
$ 9.02 USD
Free Shipping on orders $49 and up

Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 7 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less
Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 7 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors
GSP North America - Corporate Logo
T#:389680
Part#: 827213
Ships in 3 Business Days
$ 188.99 USD
Free Shipping
$ 188.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less


Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 7 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
Black Forest Industries - Corporate Logo
T#:50934253
Part#: BFI-712-BMW-C
Ships on Aug 12, 2026
New Item
$ 64.99 USD
Free Shipping on orders $49 and up
This Black Forest Industries leather shift boot is the premier interior solution for the BMW E9X owner looking to replace a worn factory gaiter.
Black Forest Industries - Corporate Logo
T#:50934255
Part#: BFI-730-BMW-A
Ships on Aug 12, 2026
New Item
$ 69.99 USD
Free Shipping on orders $49 and up
Replaces the soft-good skin of the E9X manual transmission selector.

Black Forest Industries - Corporate Logo
T#:50934276
Part#: GS2-70101-2
Ships on Aug 12, 2026
New Item
$ 184.99 USD
Free Shipping on orders $49 and up
The Black Forest Industries GS2 is the ideal choice for the BMW owner who demands both style and substance.

Black Forest Industries - Corporate Logo
T#:50934678
Part#: GSA-70101-4
Ships on Aug 12, 2026
New Item
$ 199.99 USD
Free Shipping on orders $49 and up
$ 199.99 USD
Free Shipping on orders $49 and up
Modernize your cockpit with the Black Forest Industries GS2 Automatic shift knob.
Black Forest Industries - Corporate Logo
T#:50934280
Part#: GS2-70101-5
Ships on Aug 12, 2026
New Item
$ 184.99 USD
Free Shipping on orders $49 and up
The GS2 utilizes a solid billet aluminum core to provide a dense, mechanical connection to your transmission.

Black Forest Industries - Corporate Logo
T#:50934267
Part#: BFI-BMW-E9X-M1
Ships on Aug 12, 2026
New Item
$ 302.99 USD
Free Shipping on orders $49 and up
These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.
Black Forest Industries - Corporate Logo
T#:50934271
Part#: GS1-70101-2
Ships on Aug 12, 2026
New Item
$ 164.99 USD
Free Shipping on orders $49 and up
The BFI GS1 is the perfect upgrade for the BMW enthusiast who demands better tactile feedback.

Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Aug 12, 2026
New Item
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically engineered for vehicles utilizing a wheel stud conversion.

Autel - Corporate Logo
T#:2914140
Part#: MV400-55
Ships in 7 Business Days
$ 405.99 USD
Free Shipping on orders $49 and up
This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.
Autel - Corporate Logo
T#:40782369
Part#: AUL-TS508WFK-1
Ships in 7 Business Days
$ 419.99 USD
Free Shipping on orders $49 and up
The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:50934281
Part#: GS2-70102-1
Ships on Aug 12, 2026
New Item
$ 184.99 USD
Free Shipping on orders $49 and up
Precision meets bold design.


Black Forest Industries - Corporate Logo
T#:50934274
Part#: GS1-BMW-ALC
Ships on Aug 12, 2026
New Item
$ 174.99 USD
Free Shipping on orders $49 and up
Elevate your M-Performance interior with the Black Forest Industries GS1 Alcantara Edition.
Black Forest Industries - Corporate Logo
T#:50934273
Part#: GS1-70101-4
Ships on Aug 12, 2026
New Item
$ 164.99 USD
Free Shipping on orders $49 and up
The Black Forest Industries GS1 shift knob is engineered specifically for the BMW driver who wants a more mechanical connection to their transmission.