BMW Suspension Parts for BMW 3 Series E92 (2007-2013)

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan E9X Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 15.8mm, solid, non-adjustable, urethane bushings included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

Note: main image may not match actual sway bars.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2011 E91 BMW 325i 328i - Touring Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Megan Racing introduces adjustable control arms, addressing the limitations of factory camber adjustment for BMW enthusiasts. The factory eccentric bolt provides about one degree of adjustment, typically adequate for daily-driven vehicles at factory ride height. However, enthusiasts understand that factory alignment settings may not optimize handling or tire wear. Lowered vehicles face even greater challenges, requiring adjustments beyond what eccentrics can offer. Megan Racing's adjustable control arms provide a solution, designed to tackle issues associated with lowered cars.

• Improved handling and tire wear for lowered vehicles
• Adjustable control arms for precise alignment settings
• Durable construction suitable for both daily driving and track use
• Constructed of high-strength steel alloys for durability and lightweight
• Maximum Arm Length: 11 13/16"
• Minimum Arm Length: 9 7/8"

Elevate the performance of your BMW with Turner Motorsport Performance Springs, designed to reduce body roll and enhance handling. These springs feature increased spring rates for improved grip and a slight lowering to lower the vehicle's center of gravity without sacrificing street usability or comfort. Experience reduced dive under braking and squat under acceleration for a more controlled driving experience. Here are the key benefits:

• Reduced body roll for tighter handling
• Decreased dive under braking
• Enhanced grip for improved performance
• 1/2" front lowering without compromising rear comfort
• Preset to prevent spring sag
• Shot-peened for stress relief and durability
• Worth 2 points toward your Dinan badge

For over 35 years, Turner Motorsport has been at the forefront of BMW tuning, offering meticulously developed and tested parts that preserve the original driving feel while enhancing performance. Backed by a four-year, 50,000-mile warranty, Turner Motorsport ensures quality and reliability in every product.

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: 0" (0mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2013 E92 BMW 335i 335is 335xi - Coupe

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Upgrade your BMW's air suspension system with the 444C Dual Pack Compressors from Turner Motorsport. These compressors feature a newly-developed intercooler head and stainless steel braided leader hose for enhanced durability and performance. Ensure reliable air supply for your BMW's suspension system with this comprehensive kit.

• Newly-developed intercooler head for improved performance
• Stainless steel braided leader hose with inline check valve for compressor protection
• Complete kit includes all necessary components for installation
• Enhances durability and reliability of your BMW's air suspension system

Kit Features:

• (2) 444C Black Compressors
• Patents Pending Intercooler Head
• (2) Air Filter Assemblies
• (2) Remote Mount Brackets
• (2) Sets of Remote Mount Fittings
• (2) Sets of Spare Air Filter Elements
• (8) Sets of Nuts, Bolts, Washers and Lock Washers
• (2) Stainless Steel Braided Leader Hoses with Inline Check Valve
• (6) Airline Clips

*Does not include relays, pressure switch or air line for remote air filter relocation

Enhance the appearance and performance of your BMW with the Megan Racing Lowering Spring Kit.

These lowering springs from Megan Racing improve your vehicle's looks and handling by lowering the center of gravity, reducing body roll, dive under braking, and squat during acceleration. Crafted from SAE 9254 cold wound steel, these springs offer durability and precise spring rates matched for your specific BMW model. They work seamlessly with stock shocks, although aftermarket shocks are recommended for optimal performance. Say goodbye to the unsightly fender gap and achieve a sleek, lowered stance with Megan Racing lowering springs.

• Improves vehicle's appearance and performance
• Lowers center of gravity for reduced body roll
• Enhances handling and stability
• Crafted from durable SAE 9254 cold wound steel
• Precisely matched spring rates for specific BMW models
• Compatible with stock shocks (aftermarket shocks recommended)
• Minimizes fender gap for a sleek, lowered stance