18 Inch Wheels for BMW 3 Series E92 (2007-2013)

APEX VS-5RS Forged Wheels - Staggered Set - Anthracite 18x10 Et25/18x...

Aggressive setup, may require fender rolling, removal of rear fender liners and 5mm spa...

2X Entries Into Our F80 M3 Sweepstakes

T#:7387364

Part#: VS5RS1810T25ANKT

Ships in 6 Business Days

$ 3,036.00 USD

Add to Wish List

Qty

$ 3,036.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2 Front Deep Concave - 18x10" ET25 Anthracite APEX VS-5RS Forged BMW Wheels 2 Rear Deep Concave - 18x11" ET44 Anthracite APEX VS-5RS Forged BMW Wheel The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788318

Part#: ML1018952120RKT1

Ships in 6 Business Days

$ 2,996.00 USD

Add to Wish List

Qty

$ 2,996.00 USD

Add to Wish List

18" APEX EC-7RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287717

Part#: EC7RS1895H105

Ships in 5 Business Days

Starting at $ 2,870.00 USD

Add to Wish List

Starting at $ 2,870.00 USD

Add to Wish List

Apex EC-7RS 18x9.5 ET22 18x10.5 ET22 Wheel Set These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788359

Part#: ML10189535120KT

Ships in 6 Business Days

$ 2,936.00 USD

Add to Wish List

Qty

$ 2,936.00 USD

Add to Wish List

18" Apex ML-7RT Wheels (9.5"/10.5") Staggered Set Of Four - Gloss Mot...

2X Entries Into Our F80 M3 Sweepstakes

T#:53750195

Part#: 71895225120MGKT1

Ships in 6 Business Days

$ 2,996.00 USD

Add to Wish List

Qty

$ 2,996.00 USD

Add to Wish List

x2 ML-7RT 18x9.5" ET22 Wheel - 5x120mm / 72.56mm - Gloss Motorsport Gold - Machined Lip
x2 ML-7RT 18x10.5" ET22 Wheel - 5x120mm / 72.56mm - Gloss Motorsport Gold - Machined Lip

18" APEX SM-10RS Forged Staggered Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:20584610

Part#: SM10RS189H95ST

Back Ordered

Starting at $ 2,856.00 USD

Add to Wish List

Starting at $ 2,856.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

APEX EC-7 18" Staggered Wheel Set - Race Silver

2X Entries Into Our F80 M3 Sweepstakes

T#:387045

Part#: E90LEC718910S

Ships in 6 Business Days

$ 1,588.00 USD

Add to Wish List

Qty

$ 1,588.00 USD

Add to Wish List

Specifications: Color - Race Silver Size Front - 18x9" ET31 Size Rear - 18x10" ET43

19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40545967

Part#: VS519995

Ships in 5 Business Days

Starting at $ 2,056.00 USD

Add to Wish List

Starting at $ 2,056.00 USD

Add to Wish List

APEX VS-5 19x9" ET30 & 19x9.5" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

APEX EC-7 18x11" ET44 Satin Black Wheel 23.35lbs - PROFILE 3 - Pick Y...

2X Entries Into Our F80 M3 Sweepstakes

T#:20551639

Part#: EC71811ET44

Back Ordered

Starting at $ 1,696.00 USD

Add to Wish List

Starting at $ 1,696.00 USD

Add to Wish List

Apex ARC8 18x10 ET25 18x11 ET44 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" Apex ML-7RT Wheels (9.5"/10.5") Staggered Set Of Four - Race Silv...

2X Entries Into Our F80 M3 Sweepstakes

T#:53750197

Part#: 71895225120RSKT1

Ships in 6 Business Days

$ 2,996.00 USD

Add to Wish List

Qty

$ 2,996.00 USD

Add to Wish List

x2 ML-7RT 18x10.5" ET22 Wheel - 5x120mm / 72.56mm - Race Silver - Machined Lip x2 ML-7RT 18x9.5" ET22 Wheel - 5x120mm / 72.56mm - Race Silver - Machined Lip

18" APEX VS-5RS Staggered Forged Wheel Set - Pick Your Finish ...

2X Entries Into Our F80 M3 Sweepstakes

T#:20287722

Part#: VS5RS18910D

Ships in 5 Business Days

Starting at $ 3,396.00 USD

Add to Wish List

Starting at $ 3,396.00 USD

Add to Wish List

Apex VS-5RS 18x9" ET30/31 18x10" ET25 Wheel Set These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788315

Part#: ML1018952120GKT1

Ships in 6 Business Days

$ 2,996.00 USD

Add to Wish List

Qty

$ 2,996.00 USD

Add to Wish List

18" APEX SM-10 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20386736

Part#: SM10189H10

Back Ordered

Starting at $ 1,776.00 USD

Add to Wish List

Starting at $ 1,776.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX ARC-8 18" Staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:387374

Part#: ARC81895M105LBKT

Back Ordered

$ 1,636.00 USD

Add to Wish List

Qty

$ 1,636.00 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 18x9.5" ET35 Size Rear - 18x10.5" ET27

18" APEX VS-5RS Staggered Forged Wheel Set - Pick Your Finish ...

2X Entries Into Our F80 M3 Sweepstakes

T#:20386739

Part#: VS5RS189910

Ships in 5 Business Days

Starting at $ 2,956.00 USD

Add to Wish List

Starting at $ 2,956.00 USD

Add to Wish List

The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track!

Show More Show Less

18" APEX SM-10 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20254664

Part#: SM101895105

Ships in 2 Business Days

Starting at $ 1,816.00 USD

Add to Wish List

Starting at $ 1,816.00 USD

Add to Wish List

Apex SM-10 18x9.5 ET35 18x10.5 ET22/27 Wheel Set These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX ARC-8 18x9.5/10.5" Staggered 18" Wheel Set - Hyper Black ...

2X Entries Into Our F80 M3 Sweepstakes

T#:387410

Part#: ARC81895105HB

Ships in 6 Business Days

$ 1,608.00 USD

Add to Wish List

Qty

$ 1,608.00 USD

Add to Wish List

Specifications: Color - Hyper Black Size Front - 18x9.5" ET22 Size Rear - 18x10.5" ET27 Will not fit vehicles with M Carbon Ceramic brakes.

APEX Forged EC-7R 18x9.5 ET22/18x10.5 ET22 Staggered Wheel Set - Sati...

2X Entries Into Our F80 M3 Sweepstakes

T#:590570

Part#: EC7R1895105SBKT

Ships in 6 Business Days

$ 2,766.00 USD

Add to Wish List

Qty

$ 2,766.00 USD

Add to Wish List

APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788362

Part#: ML1018952220AKT1

Ships in 6 Business Days

$ 2,936.00 USD

Add to Wish List

Qty

$ 2,936.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788361

Part#: ML10189522120KT

Ships in 6 Business Days

$ 2,936.00 USD

Add to Wish List

Qty

$ 2,936.00 USD

Add to Wish List

APEX VS-5RS Forged Wheels - Staggered Set - Satin Black 18x10 Et25/ 1...

Aggressive setup, may require fender rolling, removal of rear fender liners and 5mm spa...

2X Entries Into Our F80 M3 Sweepstakes

T#:7387366

Part#: VS5RS1810T25SBKT

Ships in 6 Business Days

$ 3,036.00 USD

Add to Wish List

Qty

$ 3,036.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2 Front Deep Concave - 18x10" ET25 Satin Black APEX VS-5RS Forged BMW Wheels 2 Rear Deep Concave - 18x11" ET44 Satin Black APEX VS-5RS Forged BMW Wheel The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" BBS RI-A Wheels - Staggered Set of Four

T#:26071925

Part#: RIA028MGRKT2

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171602

Part#: RIA045BBKT1

Ships in 3 Business Days

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26005205

Part#: RIA008BBKT2

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:25971927

Part#: RIA046MGRKT

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26071915

Part#: RIA028DBKT2

Ships on Oct 14, 2026

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26071923

Part#: RIA028DSKT2

Ships on Oct 14, 2026

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26005214

Part#: RIA008GLKT4

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Diamond Silver - Staggered Set

T#:5471111

Part#: RIA007DSKT

Ships on Oct 14, 2026

$ 4,529.00 USD

Add to Wish List

Qty

$ 4,529.00 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Staggered set of BBS RI-A Diamond Silver Front - 18x8.5 ET34 72.5 CB FPS Rings Rear - 18x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171607

Part#: RIA045MGRKT1

Ships on Oct 14, 2026

$ 4,809.00 USD

Add to Wish List

Qty

$ 4,809.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171603

Part#: RIA045DBKT1

Ships on Oct 14, 2026

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Matte Graphite - Staggered Set

T#:5471110

Part#: RIA007MGRKT

Ships on Oct 14, 2026

$ 4,460.00 USD

Add to Wish List

Qty

$ 4,460.00 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Staggered set of BBS RI-A Matte Graphite Front - 18x8.5 ET34 72.5 CB FPS Rings Rear - 18x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171605

Part#: RIA045GLKT1

Ships on Oct 14, 2026

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26005213

Part#: RIA008DSKT4

Ships on Oct 14, 2026

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26005207

Part#: RIA008DBKT3

Ships on Oct 14, 2026

$ 4,719.00 USD

Add to Wish List

Qty

$ 4,719.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171604

Part#: RIA045DSKT1

Ships on Oct 14, 2026

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26071924

Part#: RIA028GLKT2

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26171606

Part#: RIA045MBZKT1

Ships on Oct 14, 2026

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

Alzor Style 748 Staggered Wheel Set - Gunmetal/Machined Face - 18x8.5...

10X Entries Into Our F80 M3 Sweepstakes

T#:56544057

Part#: 748-6-8KT

Ships on Dec 14, 2026

$ 1,166.99 USD

Add to Wish List

Qty

$ 1,166.99 USD

Add to Wish List

Looking to improve the look of your BMW but don't want to put a massive hole in your bank account? Alzor wheels are the perfect option! With multiple styles and sizes to choose from, you can dial in the look you want! Alzor wheels are designed to fit most BMWs without major modifications. Wheel Spacers may be required for an optimal flush or stock-style fitment depending on your model.

Show More Show Less

APEX SM-10 18" Staggered Wheel Set - Race Silver

2X Entries Into Our F80 M3 Sweepstakes

T#:394136

Part#: SM101885ET35KT1

Back Ordered

$ 1,756.00 USD

Add to Wish List

Qty

$ 1,756.00 USD

Add to Wish List

Wheel Specifications Style: SM-10 Size (Front): 18x8.5" ET35 Size (Rear): 18x10" ET25 Color: Race Silver APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! Price is per wheel.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788341

Part#: ML1018850120RKT

Ships in 6 Business Days

$ 2,916.00 USD

Add to Wish List

Qty

$ 2,916.00 USD

Add to Wish List

V710 18" Wheels - Staggered Set Of Four

T#:377339

Part#: V13389KT

Back Ordered

$ 1,040.00 USD

Add to Wish List

Qty

$ 1,040.00 USD

Add to Wish List

V710 18" Wheels - Staggered Set Of Four will transform your BMW's appearance and performance with their striking design and advanced engineering. These Style 710 wheels are crafted with a motorsport-inspired theme, featuring a split seven-spoke design and the deepest concave profile in VMR’s lineup.

By opting for a staggered setup, drivers can enhance their vehicle's grip and handling, ensuring an aggressive stance that commands attention on the road. The lightweight construction of these wheels not only improves performance but also contributes to a more responsive driving experience.

Eye-catching split seven-spoke design adds a motorsport flair
Deep concave profile provides a unique and aggressive look
Staggered setup enhances grip and handling for superior performance
Lightweight construction improves responsiveness and acceleration
Designed specifically for BMW vehicles to ensure a perfect fit

Show More Show Less

18" APEX EC-7RS Staggered Forged Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:20551656

Part#: EC7RS189H95ST

Back Ordered

Starting at $ 2,856.00 USD

Add to Wish List

Starting at $ 2,856.00 USD

Add to Wish List

Apex ARC8 18x9" ET30/31 18x9.5" ET22 ET25 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Show More Show Less

APEX Forged EC-7R 18x9 ET30/ 18x10 ET25 Staggered Wheel Set - Satin B...

2X Entries Into Our F80 M3 Sweepstakes

T#:590538

Part#: EC7R189ET30SSBKT

Back Ordered

$ 2,744.00 USD

Add to Wish List

Qty

$ 2,744.00 USD

Add to Wish List

APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.

Show More Show Less

18" APEX VS-5 Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40512138

Part#: VS51899522

Ships in 5 Business Days

Starting at $ 1,856.00 USD

Add to Wish List

Starting at $ 1,856.00 USD

Add to Wish List

APEX VS-5 18x9" ET30 & 18x9.5" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

18" APEX SM-10 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287694

Part#: SM10189ET30

Back Ordered

Starting at $ 1,776.00 USD

Add to Wish List

Starting at $ 1,776.00 USD

Add to Wish List

Apex SM-10 18x9" ET30/31 18x10" ET25 Wheel Set . These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ARC-8 staggered Wheel Set - Silver

2X Entries Into Our F80 M3 Sweepstakes

T#:6460329

Part#: ARC8189522SKT

Back Ordered

$ 1,576.00 USD

Add to Wish List

Qty

$ 1,576.00 USD

Add to Wish List

Specifications: Color - Race Silver Size Front - 18x9" ET30 Size Rear - 18x9.5" ET35

18" APEX ARC-8 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287719

Part#: ARC81895H105

Ships in 5 Business Days

Starting at $ 1,676.00 USD

Add to Wish List

Starting at $ 1,676.00 USD

Add to Wish List

Apex SM-10 18x9.5 ET22 18x10.5 ET22 Wheel Set These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" Apex ML-7RT Wheels (9"/10") Staggered Set Of Four - Race Silver ...

2X Entries Into Our F80 M3 Sweepstakes

T#:53750202

Part#: 7189305120RSKT1

Ships in 6 Business Days

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

x2 ML-7RT 18x9" ET30 Wheel - 5x120mm / 72.56mm - Race Silver - Machined Lip x2 ML-7RT 18x10" ET25 Wheel - 5x120mm / 72.56mm - Race Silver - Machined Lip

18" APEX VS5RS Staggered Forged Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:20584604

Part#: VS5RS189H95ST

Ships in 5 Business Days

Starting at $ 2,936.00 USD

Add to Wish List

Starting at $ 2,936.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

Project Cars

SELECT YOUR BMW

18 Inch Wheels for BMW 3 Series E92 (2007-2013)

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results