BMW Drivetrain Parts for BMW 3 Series E92 (2007-2013)

Schwaben offers the right tools to make your next project a success. Everything from complex engine scanners to brake bleeders and spring compressors, Schwaben tools has you covered.

Some of the recommended use include but are not limited to:

• Remove and install rear ball joints on E38, E39, E60/61, E63/64, E65/66, and E70's
• Removal and installation of ball joints and bushings on rear control arms on E36, E46, E39, E60/61, E63/64,  E65/66, E70, E83 and E85/86 Z4's
• Removal and installation of rear sub frame mounted differential bushings on E36, E46, E83 and E85/86 Z4's
• Removal and installation of rear differential mounted bushings on E36, E46, E9X, E60/61, E63/64, E65/66, and E85/86 Z4's

Ensure precise clutch installation with this specialized alignment tool, designed specifically for N54-equipped BMWs. While most aftermarket clutch kits include a generic alignment tool, many are intended for the N55, which is incompatible with the N54 due to differences in pilot bearing mounting and flywheel design.

This tool is engineered for both 6-bolt (01/2009+) and 8-bolt (-01/2009) N54 flywheels, allowing you to accurately center and align the clutch disc on the flywheel during pressure plate installation. Achieve a hassle-free and precise fit with this essential service tool.

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

This is a complete differential to change the gearing of a manual transmission E90/E92 325i, 328i, or 330i (not for xi models) to a 3.64 ratio final drive. The standard gearing on the manual transmission cars is 3.15 or 3.23, making this E90 diff significantly shorter. This diff is from a 330i automatic where the gear ratio has to be shorter to make up for the transmission gearing differences and extra weight. This will dramatically improve acceleration on any 325i, 328i or 330i INSTANTLY! If you are looking for better off-the-line or rolling acceleration, and are willing to sacrifice a little top-speed (some of us don't get up to 150mph), this is one of the best ways to achieve it with almost no downside. There are few things that can improve your 0-to-60 and 0-to-100 times as much as shorter gearing, and this differential is clearly a best "bang-for-buck" solution for dramatically better acceleration. Since this is an Original BMW part it carries the same BMW two year warranty as any other new part. So there's no need to take a chance on a used part from a private seller. (former BMW part number 33107519944)

Changing gear ratio changes the RPM range for any given speed. Use the chart below for examples of speed vs RPM changes for the 3.64 diff.
 

2006 330i, 6-speed manual, stock 3.15 gears, 255/35-18" rear tires

Gear RatioGearSpeedRPM

40 MPH in 4th

3.154th40 MPH2,100 RPM

3.644th40 MPH2,400 RPM

70 MPH Cruise

3.156th70 MPH2,500 RPM

3.646th70 MPH2,900 RPM

5th Gear Speed @ 6,000 RPM

3.155th142 MPH6,000 RPM

3.645th123 MPH6,000 RPM

Why 5th? Because 6th does not have the mechanical advantage to get past wind resistance at these speeds - it is more of a cruise/overdrive gear. Using 5th for comparison purposes is much more relevant than having to take into account wind direction, resistance, grade, elevation, tire sizing, etc. These numbers are for comparisons among gear ratios only, not to determine what your E90 will top out at.2006-2011 325i or 328i, 6-speed manual, stock 3.23 gears, 255/35-18" rear tires

(click to expand)

Gear RatioGearSpeedRPM

40 MPH in 4th

3.234th40 MPH2,150 RPM

3.644th40 MPH2,400 RPM

70 MPH Cruise

3.236th70 MPH2,600 RPM

3.646th70 MPH2,900 RPM

5th Gear Speed @ 6,000 RPM

3.235th138 MPH6,000 RPM

3.645th123 MPH6,000 RPM

Speed in 5th gear at 6,000 RPM is for theoretical and comparison purposes only. It doesn't mean that these speeds are actually reachable.

A $100 refundable core charge must be added at the time of order. This core charge can be refunded when you ship your original diff back to us.

This item fits the following BMWs with manual transmission only:
2006-2011 E90 BMW 325i 328i 330i - Sedan
2006-2012 E91 BMW 325i 328i - Wagon
2007-2013 E92 BMW 328i - Coupe
2007-2013 E93 BMW 328i - Convertible