Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.

Key Benefits:

Reinforced mounting ear for strength and stability
16% Increased fluid capacity
External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:

Fits manual transmission Large Case 215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Convert your open differential to a locked differential without the costly expense of an LSD replacement.

Get your car ready for aggressive track driving or drifting without purchasing or replacing your differential. The weld-in plates strengthen your diff and allow both wheels to engage simultaneously giving you a more predictable and capable track car.

An open differential allows the wheels to spin at different speeds and sends power to the wheel with the least amount of traction. This may be a good feature for your regular everyday driver but limits you on the track. The weld-in plates simulate a driving experience similar to a limited-slip differential allowing you to put power to both wheels in a low traction area or initiate drifts.

Features and benefits:

Added strength to your differential gears
Converts from open differential
Fabricated to fit in the spider gears for an easier weld and increased confidence
Made from 7 gauge mild steel, formed to fit

Streamline the setup process for your Limited Slip Differential (LSD) with this mandatory back-lash setting tool. This custom-designed tool is instrumental in reducing installation time by a whopping 50%! It's important to note that this tool is not part of BMW's offerings. Should there be any defects or warranty-related matters, it's advisable to directly reach out to Team M Factory for prompt resolution.

Differential Rebuild Kit Plus by Team MFactory

Upgrade your BMW's differential with the Differential Rebuild Kit Plus by Team MFactory. Whether you've recently replaced your differential or upgraded to a Limited-Slip, it's essential to replace the hardware to ensure optimal performance. This comprehensive kit from ECS Tuning includes 10 Differential Ring Gear Bolts, new axle seals, and new differential bearings, providing everything you need for a complete differential rebuild. With high-quality components, you can trust this kit to support your new differential or rebuild your existing unit effectively.

• Comprehensive kit includes Differential Ring Gear Bolts, axle seals, and differential bearings
• Ensures optimal performance of your BMW's differential
• Perfect for differential replacement or upgrades to Limited-Slip
• High-quality components for reliability and durability
• Provides all necessary hardware for a complete rebuild

Introducing the Wavetrac® Torque Biasing Differential by Turner Motorsport, the pinnacle of innovation for your BMW. This cutting-edge technology takes your vehicle's performance to a whole new level. With its patented design, the Wavetrac® differential is a trailblazer, automatically enhancing grip when navigating low-traction conditions. Its approach is truly revolutionary, setting it apart from other torque biasing differential designs.

Quality is the hallmark, featuring high-strength 9310 steel gears enclosed in case-hardened billet or forged steel bodies. Throughout the differential, ARP® fasteners are used, ensuring superior durability and performance. What's more, the Wavetrac® differential is virtually maintenance-free, promising a lifetime of service without the need for rebuilds.

To provide added confidence, all Wavetrac® differentials are backed by a transferable limited lifetime warranty, highlighting the product's reliability and longevity.

Important Note for Bolt Kits:

For vehicles equipped with a welded ring gear, the installation process requires the removal, drilling, and installation of the welded ring gear from your stock differential. This intricate task should be entrusted to a professional machine shop. To seamlessly install the ring gear onto the new differential, you'll need Bolt Kit ES4368731. It's imperative to consult your machine shop before purchasing this item and the necessary hardware kit.

Please be aware that no technical drawings or instructions are provided, underscoring the importance of verifying compatibility and ensuring correct installation with your chosen machine shop. Refunds or replacements will not be offered in the event of incorrect ring gear installation or differential failure due to improper installation.

The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.

What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).

An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.

Features:

An industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**

Includes $500 core charge to be refunded when we receive your rebuildable core.