Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.
Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.
All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.
Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.
Key Benefits:
Reinforced mounting ear for strength and stability
16% Increased fluid capacity
External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:
Fits manual transmission Large Case 215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug
Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.
Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing the Turner diff cover can handle anything you throw at it. Not only is it an absolute masterpiece, but this billet diff cover checks all the boxes for features needed. Reinforced mounting ear for strength and stability. The mounting ear is unified with the one-piece billet cover and features added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication of the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.
All of the OEM features were retained along with the upgrades. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now be used for an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.
Upgrading to our Turner Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also offers a visually appealing design.
Key Benefits:
Reinforced mounting ear for strength and stability
16% Increased fluid capacity
External fins on the back side, bottom, and mounting ear on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:
Fits manual transmission Large Case 215mm differentials
Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
If there was a Top 5 list of things to do on the E46 M3, a shorter gears would be in the top two... The gearing used to be overlooked when planning modifications but the 3.91 and 4.10 gears are now one of our biggest selling upgrades for the E46 M3! With a rear end gear upgrade you get the effects of adding horsepower but without adding any more stress to the engine or drivetrain. The R&P acts as a torque multiplier, getting you into the power band sooner in each gear. It's one of the best areas to get return from your modification spending. The shorter (numerically higher) rear end gears will give you better acceleration in all gears at any speed with few downsides. Want to make your car faster off the line or out of corners? Or avoid a downshift to pass on the highway? This is what you need. This 4.10 is the latest version from BMW Motorsport - shot peened and hardend for increased strength. The R&P can be installed on its own but for cars that have more than 60,000 miles it would be a better idea to rebuild the whole diff. The factory viscous limited slip units have a typical lifespan of 50-70,000 miles. We offer diff rebuilding with 4.10 or other gear options and you get a fully-rebuilt and serviced limited slip unit at the same time. Click here for our diff rebuild options.
4.10 Gearing Example: 2004 M3, 6-speed manual, 275/35-19" rear tires
Gear RatioGearSpeedRPM
40 MPH in 4th
3.62 4th 40mph 2,250rpm
4.10 4th 40mph 2,550rpm
70 MPH Cruise
3.62 6th 70mph 2,650rpm
4.10 6th 70mph 3,000rpm
5th Gear Speed at Redline
3.62 5th 175mph 8,000rpm
4.10 5th 154mph 8,000rpm
Why 5th? Because 6th does not have the mechanical advantage to get past wind resistance at these speeds - it is more of a cruise/overdrive gear. Using 5th for comparison purposes is much more relevant than having to take into account wind direction, resistance, grade, elevation, tire sizing, etc. These numbers are for comparisons among gear ratios only, not to determine what your M3 will top out at.
This item is the genuine BMW part and the ring & pinion set only. You will need to have this professionally installed into your existing differential. BMW does not supply differential rebuild parts (bearings, shims, plates, etc.) so only a qualified shop that is experienced in BMW diff rebuilding should perform this installation. We also offer built differentials and exchanges, click here.
This item fits the following BMWs:
2001-2006 E46 BMW M3
2004-2010 E60 BMW M5 (manual transmission only)
OEM part number 33108321899
Gaining a prominent edge over the competition is now within reach, thanks to the MFactory Helical Limited Slip Differential offered by Turner Motorsport. This Helical LSD ensures a seamless and uniform distribution of power to your BMW's wheels, significantly enhancing traction whether you're on the street, strip, or track. It's an absolute necessity for BMW enthusiasts.
Curious about the LSD's role? Without it, your car essentially operates as a one-wheel-drive machine, delivering torque solely to the wheel with less grip. This is where the Helical LSD shines, as it allows both wheels to receive power by limiting the speed difference between them, in contrast to the open differentials found in most vehicles.
Break-In Procedure: For optimal performance, it's recommended to change the fluid after the first 3-400 miles of use.
Please note that any defects or warranty claims should be directed to Team MFactory.
Introducing the Wavetrac® Torque Biasing Differential by Turner Motorsport, the pinnacle of innovation for your BMW. This cutting-edge technology takes your vehicle's performance to a whole new level. With its patented design, the Wavetrac® differential is a trailblazer, automatically enhancing grip when navigating low-traction conditions. Its approach is truly revolutionary, setting it apart from other torque biasing differential designs.
Quality is the hallmark, featuring high-strength 9310 steel gears enclosed in case-hardened billet or forged steel bodies. Throughout the differential, ARP® fasteners are used, ensuring superior durability and performance. What's more, the Wavetrac® differential is virtually maintenance-free, promising a lifetime of service without the need for rebuilds.
To provide added confidence, all Wavetrac® differentials are backed by a transferable limited lifetime warranty, highlighting the product's reliability and longevity.
For vehicles equipped with a welded ring gear, the installation process requires the removal, drilling, and installation of the welded ring gear from your stock differential. This intricate task should be entrusted to a professional machine shop. To seamlessly install the ring gear onto the new differential, you'll need Bolt Kit ES4368731. It's imperative to consult your machine shop before purchasing this item and the necessary hardware kit.
Please be aware that no technical drawings or instructions are provided, underscoring the importance of verifying compatibility and ensuring correct installation with your chosen machine shop. Refunds or replacements will not be offered in the event of incorrect ring gear installation or differential failure due to improper installation.
Upgrade your BMW's differential with the Differential Rebuild Kit Plus by Team MFactory. Whether you've recently replaced your differential or upgraded to a Limited-Slip, it's essential to replace the hardware to ensure optimal performance. This comprehensive kit from ECS Tuning includes 10 Differential Ring Gear Bolts, new axle seals, and new differential bearings, providing everything you need for a complete differential rebuild. With high-quality components, you can trust this kit to support your new differential or rebuild your existing unit effectively.
Upgrade your BMW's driveline with SuperPro differential bushings to enhance road feel and reduce driveline slop. While stock bushings excel at insulating the cabin from vibrations, they often lack in improving road feedback. SuperPro's differential bushings are engineered to better locate your driveline, providing a more connected driving experience and improved power delivery to the road surface. With over 40 years of experience in manufacturing suspension components and bushings, SuperPro leads the industry in polyurethane technology. These bushings are not just replicas of stock ones; they are meticulously developed to leverage the unique properties of SuperPro's polyurethane blend, ensuring top-notch performance. Expect consistent quality, precise fitment, and minimal increase in noise, vibration, and harshness (NVH) with SuperPro differential bushings.
Upgrade your BMW's drivetrain with this comprehensive kit that includes a new pumpkin for a hassle-free bolt-in replacement. Plus, enjoy the added benefit of a $500 refundable core charge. For any defects or warranty claims, please directly reach out to Team M Factory.
Often overlooked, scheduled rear differential service is very important. Over time gear lube breaks down causing bearings and internal components fail. Regular maintenance will keep your vehicle running properly for years to come.
Please see kit contents tab for included items.
This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.
This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.
E9X Diff Mount Set includes:
Upgrade your BMW S54 3.2L & S65 4.0L Engines with the Turner Motorsport Wavetrac Limited Slip Differential. Featuring patented Wavetrac® design, this innovative differential automatically enhances grip in low traction conditions, providing superior performance compared to traditional designs. Crafted with high-strength 9310 steel gears and ARP® fasteners, this differential ensures durability and reliability. Maintenance-free and backed by a limited lifetime warranty, the Wavetrac® differential offers peace of mind and exceptional performance for your BMW.
Unleash the full potential of your BMW and gain a competitive edge with the Turner Motorsport MFactory Metal Plate Limited Slip Differential. Engineered for superior performance, this differential ensures a smooth and consistent distribution of power to the wheels, maximizing traction and putting the power firmly on the ground. The 1.5-way design provides torque transfer during acceleration and halfway through deceleration, making it an ideal choice for those focused on track use.
Upgrade your BMW's drivetrain with the Turner Motorsport MFactory Metal Plate Limited Slip Differential for unmatched toughness and performance.
This is a complete differential to change the gearing of a manual transmission E90/E92 325i, 328i, or 330i (not for xi models) to a 3.64 ratio final drive. The standard gearing on the manual transmission cars is 3.15 or 3.23, making this E90 diff significantly shorter. This diff is from a 330i automatic where the gear ratio has to be shorter to make up for the transmission gearing differences and extra weight. This will dramatically improve acceleration on any 325i, 328i or 330i INSTANTLY! If you are looking for better off-the-line or rolling acceleration, and are willing to sacrifice a little top-speed (some of us don't get up to 150mph), this is one of the best ways to achieve it with almost no downside. There are few things that can improve your 0-to-60 and 0-to-100 times as much as shorter gearing, and this differential is clearly a best "bang-for-buck" solution for dramatically better acceleration. Since this is an Original BMW part it carries the same BMW two year warranty as any other new part. So there's no need to take a chance on a used part from a private seller. (former BMW part number 33107519944)
Changing gear ratio changes the RPM range for any given speed. Use the chart below for examples of speed vs RPM changes for the 3.64 diff.
2006 330i, 6-speed manual, stock 3.15 gears, 255/35-18" rear tires
Gear RatioGearSpeedRPM
40 MPH in 4th
3.154th40 MPH2,100 RPM
3.644th40 MPH2,400 RPM
70 MPH Cruise
3.156th70 MPH2,500 RPM
3.646th70 MPH2,900 RPM
5th Gear Speed @ 6,000 RPM
3.155th142 MPH6,000 RPM
3.645th123 MPH6,000 RPM
Why 5th? Because 6th does not have the mechanical advantage to get past wind resistance at these speeds - it is more of a cruise/overdrive gear. Using 5th for comparison purposes is much more relevant than having to take into account wind direction, resistance, grade, elevation, tire sizing, etc. These numbers are for comparisons among gear ratios only, not to determine what your E90 will top out at.2006-2011 325i or 328i, 6-speed manual, stock 3.23 gears, 255/35-18" rear tires
(click to expand)
Gear RatioGearSpeedRPM
40 MPH in 4th
3.234th40 MPH2,150 RPM
3.644th40 MPH2,400 RPM
70 MPH Cruise
3.236th70 MPH2,600 RPM
3.646th70 MPH2,900 RPM
5th Gear Speed @ 6,000 RPM
3.235th138 MPH6,000 RPM
3.645th123 MPH6,000 RPM
Speed in 5th gear at 6,000 RPM is for theoretical and comparison purposes only. It doesn't mean that these speeds are actually reachable.
A $100 refundable core charge must be added at the time of order. This core charge can be refunded when you ship your original diff back to us.
This item fits the following BMWs with manual transmission only:
2006-2011 E90 BMW 325i 328i 330i - Sedan
2006-2012 E91 BMW 325i 328i - Wagon
2007-2013 E92 BMW 328i - Coupe
2007-2013 E93 BMW 328i - Convertible
BMW E60 E90 E92 Re Manufactured Front Differential from Turner Motorsport offers a reliable and cost-effective solution to restore your BMW's drivetrain performance. This high-quality, re-manufactured differential is engineered to meet or exceed OEM standards, ensuring smooth power delivery and optimal handling. Designed to replace a worn or damaged differential, this unit provides the dependability and durability you expect from Turner Motorsport's expertise in BMW components.
Replace your worn front differential with the BMW E60 E90 E92 Re Manufactured Front Differential for a renewed driving experience and superior performance.