BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 3 Series E92 (2007-2013)

Free ground shipping!

The Supersprint Crossover Pipe will delete the rear resonator ahead of the rear mufflers. By removing the resonator, you can get more volume and growl from your exhaust as well as decrease exhaust restriction for slightly better power and torque. Deleting resonators makes a small but noticeable increase in overall volume so it's recommended that this is done after changing or removing mufflers. This x-pipe fits in section 2 of the exhaust - after the factory secondary cat section and before the rear mufflers. It's a direct install with Supersprint mufflers but any other set of mufflers may require custom professional installation to achieve a perfect fit.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:section 2 resonator delete

connects to:stock section 1 catalytic converters; Supersprint rear mufflers or custom mufflers

material:T304 stainless steel

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe

This plug is a replacement for the following models: 10901020A, 10901020B, 10901020C, 10901020D, 10301050, 10101020 and any other VRSF chargepipe that utilizes a water injection bung. VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is a crucial component for maintaining peak performance in turbocharged BMW engines. Designed to prevent boost leaks and ensure a secure seal for methanol and water injection ports, this bung plug is crafted from premium materials for long-lasting reliability. Compatible with VRSF chargepipes, it is an ideal solution for BMW enthusiasts seeking precision and durability in their high-performance setups. Available through Turner Motorsport, this part ensures seamless integration with your BMW's engine components.

Benefits: Ensures a secure seal for methanol and water injection ports to prevent boost leaks Built from high-quality materials for superior strength and longevity Compatible with VRSF chargepipes on 07-16 BMW N54, N55, N20, N26, S55, and B58 engines Easy installation minimizes downtime and simplifies engine upgrades Maintains optimal turbo efficiency and performance in high-pressure systems The VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is the ultimate choice for BMW owners committed to maximizing reliability and performance.

Secures the exhaust manifold to the head. Used on all BMW N-series motors that are turbo-charged.

Genuine BMW Flange Nut
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N54,N54T,N55
 

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 12mm locking collar can be found HERE.

Lightweight axle-back featuring an exotic exhaust note. Designed for minimal drone at driving speed and maximum volume when desired.

Prepare to give your 335 the boost it deserves. Our axle-back exhaust was made to redefine the driving experience of your E9x. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust flow and tuned exhaust note, we are very excited to get these exhausts on 335's everywhere, don't wait!

In crafting the 335 exhaust systems, the primary focus is achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. This ECS exhaust for your 335 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N54 and N55 E chassis, they have engineered an exhaust packed with innovative features, compatible with factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

Prepare for a fresh new exhaust, things are about to get rowdy. This ECS exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket downpipes. The dual 2.5" mid-pipes make their way toward the rear axle with smooth transitions for effortless exhaust flow. Replacing the large suitcase muffler is a pair of 2.5" turbo-style mufflers that shed weight and give a signature sound. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and frequency. Paired with the 2.5" mufflers is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
33% lighter than stock!
Stock axle-back: 51lbs
ECS axle-back: 34lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

Dual 2.5" rear section and adapters
2.5" free-flowing mufflers for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips

This seals the exhaust manifold to the head. We recommend replacing this any time the exhaust manifold needs to be removed.
With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

Fits the following BMW's:
E60 E61 E71 E82 E88 E90 E92 E93 F01 F02 F25 Z4 - With the N54 engine