BMW Coilovers for Street Use for BMW 3 Series E92 (2007-2013)

KW DDC Coilover Kit - DDC ECU Controlled - E92 3 Series RWD

For vehicles without EDC

T#:222776

Part#: 39020008

Back Ordered

$ 4,894.00 USD

Add to Wish List

Qty

$ 4,894.00 USD

Add to Wish List

Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 0.8 - 2.0" Rear: 0.6 - 1.8"

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

T#:4333544

Part#: I-03-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

For vehicles originally equipped with EDC

For models originally WITH EDC

T#:4333516

Part#: I-13-ZR

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit Without Rear Pillowball -...

T#:4333518

Part#: I-18-ZR

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

E90 E92 M3 KW V1 Series Coilover Kit - Fixed Damping

T#:349017

Part#: 10220083

Back Ordered

$ 2,724.00 USD

Add to Wish List

Qty

$ 2,724.00 USD

Add to Wish List

Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 10-40mm lowering; Rear = 5-35mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
This is the ideal coil over kit for a E9x M3 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

Lifetime warranty!

These KW Variant 1 coil overs fit the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333517

Part#: I-39-ZR

Back Ordered

2% off MSRP $ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

Qty

2% off MSRP

$ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - E90/92 Non-M RWD ...

T#:4319899

Part#: I-03-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

E90/E92 325i/328i/330i/335i KW Coilover Kit - Street Comfort ...

T#:361415

Part#: 18020032

Back Ordered

$ 2,414.00 USD

Add to Wish List

Qty

$ 2,414.00 USD

Add to Wish List

Adjustable Rebound Damping, Sport Comfort Springs

Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

KW street comfort – The most individual sport suspension with maximum comfort

With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

Maximum driving comfort for a perfect performance and more driving pleasure
Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
Comfortable adjustment
Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
Better handling due to less body roll
TUV approved lowering range
Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
Trapezoid thread for a easy height adjustability
High quality damper components for long durability
Adjustable rebound damping
Complete detailed documentation for easy use

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states.

This item fits the following BMWs:
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For vehicles originally equipped with EDC

For models originally WITH EDC

T#:4333547

Part#: I-13-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

ST XTA Plus 3 Coilover Kit - BMW E9X M3 (with EDC)

T#:638037

Part#: 1820220857

Back Ordered

$ 2,799.00 USD

Add to Wish List

Qty

$ 2,799.00 USD

Add to Wish List

After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 0.4-1.6" Rear: 0.2-1.4"

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333548

Part#: I-39-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

ST XTA Plus 3 Coilover Kit - BMW E9X M3 (w/o EDC)

For vehicles without EDC

T#:638036

Part#: 1820220867

Ships in 4 Business Days

$ 2,799.00 USD

Add to Wish List

Qty

$ 2,799.00 USD

Add to Wish List

After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 0.4-1.6" Rear: 0.2-1.4"

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E90/E92 325xi 328xi 330...

T#:47439369

Part#: I-113-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - BMW E90/92 M3 (W/ EDC) ...

For vehicles originally equipped with EDC

T#:47439373

Part#: I-13-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Coilovers for Street Use for BMW 3 Series E92 (2007-2013)

KW DDC Coilover Kit - DDC ECU Controlled - E92 3 Series RWD

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

BC Racing ZR Series Coilover Suspension Kit Without Rear Pillowball -...

E90 E92 M3 KW V1 Series Coilover Kit - Fixed Damping

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

BC Racing RM Series Coilover Suspension Kit - E90/92 Non-M RWD ...

E90/E92 325i/328i/330i/335i KW Coilover Kit - Street Comfort ...

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

ST XTA Plus 3 Coilover Kit - BMW E9X M3 (with EDC)

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

ST XTA Plus 3 Coilover Kit - BMW E9X M3 (w/o EDC)

BC Racing DS Series Coilover Suspension Kit - E90/E92 325xi 328xi 330...

BC Racing RM Series Coilover Suspension Kit - BMW E90/92 M3 (W/ EDC) ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results