BMW Cooling System Parts & Accessories for BMW 3 Series E92 (2007-2013)

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• OEM Wahler Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM VDO Mounting hardware required for both the thermostat and water pump

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This Genuine BMW radiator expansion tank (coolant reservoir) is used on many BMW's with the N20, N51, N52 and N54 engines. Due to the higher operating temperatures of these engines plastic components are more susceptible to failure. If you are overhauling your coolant system, now is the time to consider preventative replacing this expansion tank.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2011+ E82 BMW 128i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2013+ E84 BMW X1 sDrive28i X1 xDrive28i
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

This is a RADIATOR for BMW 3 series with the N52/N52N engine (3.0 liter naturally aspirated) from 2006 to 2009 WITH AUTOMATIC TRANSMISSION.

This part fits the following BMWs
2008+ E82 BMW 128i N52
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi N52/N52N- Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive N52/N52N - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive N52/N52N - Coupe
2007-2013 E93 BMW 328i N52/N52N- Convertible
2009+ Z4 BMW Z4 sDrive30i